02-19-2012, 03:20 PM
|
#12 (permalink)
|
|
NOT AN ACTIVE SPONSOR. DO NOT BUY
Join Date: Dec 2008
Location: CALIFORNIA
Posts: 913
Drives: 370Z
Rep Power: 18
|
Quote:
Originally Posted by Nissan370
any high hp guys max the maf out yet on our cars
just tring to get an idea at what hp lvl's we need new maf sensors.
thxs
|
Two main factors, Maf location and pipe diameter, With our blow through set up and our 3" piping you will be at 4.8 to 4.9 volts in the 600 WHP mark. this have been very consistent due to our Maf locations.
Now if you have the stillen draw through set up then your mafs will max out much sooner, I have seen them max out at low 400WHP .
Quote:
Originally Posted by Vince@R/T
|
No They are not the GT mafs's Calibration from UPREV, as i have said that before in that same thread. Our calibration has much bigger sealing.
Quote:
Originally Posted by SAM@GTM
There is one source for those after market maf sensors, These are the same sensors that UPrev, AAM, AMS uses, We are just applying our own Calibration on them .
Sam
|
|
|
|
Similar Threads
1Likes
Threaded Mode
