In-House GTM Stage 2 SC Install\Tune

Originally Posted by Mike@GTM Yes, it's possible. Here's a graph of the Stage 2 with a smaller diameter pulley making 400wtq. Notice that the pull ends at 6200rpm because we

		Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction
$In-House GTM Stage 2 SC Install\Tune$ In-House GTM Stage 2 SC Install\Tune

LinkBack

Thread Tools

Display Modes

11-14-2011, 09:00 PM

#18 (permalink)

kosstick

Track Member

Join Date: Apr 2011

Location: Los Angles

Posts: 668

Drives: G37

Rep Power: 16

Quote:

Originally Posted by Mike@GTM

Yes, it's possible. Here's a graph of the Stage 2 with a smaller diameter pulley making 400wtq. Notice that the pull ends at 6200rpm because we stopped the pull...we were making 14psi of boost which was more than we wanted to make. The stage 2 is a real powerhouse once you start spinning it up.

Normally, we ship the Stage 2 with a 92mm pulley that is good for 500whp on 93 octane gas. Kosstick wanted less power and got the 96mm pulley instead.

seems like the general increase per 1k rpm is 100 WHP just like my set up.

So this car is possibly making 530-550 whp?

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY GTM Twin Turbo Stage 2 Install!!	modme	Forced Induction	59	07-09-2017 10:26 AM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.	SAM@GTM	Forced Induction	311	09-07-2011 03:42 AM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.	SAM@GTM	Forced Induction	254	08-11-2010 10:59 AM
Nismo S-Tune install help	caneman88	DIY Section (Do-It-Yourself)	0	01-31-2010 07:53 PM

All times are GMT -5. The time now is 03:45 AM.