phunk's CJM Greddy TT - Build, Info, Reviews, Etc

esfourteen · 10-12-2011, 02:51 PM

Quote:

Originally Posted by NYBladeZ

hmm might make it a winter project, considering I don't daily drive the car mileage wouldn't really be an issue. I have an UpRev tune so I guess it would be a matter of larger injectors, fuel pump and a retune. I know UpRev allows for multiple maps so wouldn't it be possible to have an e85 tune and a 93 tune? Also when I go F.I. I could still use the injectors and fuel pump, it would be nice to see what an N/A Z could do and the savings at the pump would be sweet!

Performance Motorsport ran 100 octane with more timing, trust me you aren't looking at much.

phunk · 10-12-2011, 02:54 PM

^ yes if you were going to do E85 now with plans for FI in the future, you may as well just go big on the fuel system from the start since you are going to need a complete retune anyway. Toss in some id1000 and the aeromotive pump, i can get you a pump install kit and tell you how to mod the assembly to support the flow of the larger aero pump.

then you can tune and get the startup, idle, cruise, etc all perfectly squared away so that once you add the FI all you have to do is fine tune for the higher airflow.

yes you could have seperate maps, but that would only work if you run it until totally empty and get all the previous fuel out. converting to e85 doesnt make a flex fuel vehicle, so it has to run on straight 100% the fuel that its tuned for. of course, you dont have to like drain until completely bone dry, a couple % one way or the other should be tolerable, but i would want less than a gallon in the tank when switching back and forth.

phunk · 10-13-2011, 12:00 PM

I have been having a hard time deciding if I realllly wanted to build the motor in this thing or just "deal with" the power I can make on the stock motor until I get a different car.

Well, we picked up again on our billet intake manifold project yesterday, and I am going to need a high power car to test its limits on. So, I went ahead and ordered some pistons. I have a spare long block in my garage at home. Need to pick out some rods and get this to the machine shop.

I guess I will have lots of updating to do with my thread over the course of the next few months.

esfourteen · 10-13-2011, 12:21 PM

Quote:

Originally Posted by phunk

I have been having a hard time deciding if I realllly wanted to build the motor in this thing or just "deal with" the power I can make on the stock motor until I get a different car.

Well, we picked up again on our billet intake manifold project yesterday, and I am going to need a high power car to test its limits on. So, I went ahead and ordered some pistons. I have a spare long block in my garage at home. Need to pick out some rods and get this to the machine shop.

I guess I will have lots of updating to do with my thread over the course of the next few months.

awesome, can't wait to see the results Charles. What pistons are you using and what CR?

phunk · 10-13-2011, 12:37 PM

I ordered some custom Wiseco 10:1 pistons

GambitX · 10-13-2011, 12:38 PM

Nice!!

carrillo or eagle rods?

phunk · 10-14-2011, 11:42 AM

those are sort of opposite ends of the spectrum, i imagine grabbing something in the middle

Reality · 10-14-2011, 12:49 PM

Quote:

Originally Posted by phunk

I have been having a hard time deciding if I realllly wanted to build the motor in this thing or just "deal with" the power I can make on the stock motor until I get a different car.

Well, we picked up again on our billet intake manifold project yesterday, and I am going to need a high power car to test its limits on. So, I went ahead and ordered some pistons. I have a spare long block in my garage at home. Need to pick out some rods and get this to the machine shop.

I guess I will have lots of updating to do with my thread over the course of the next few months.

Sub'd!!!
Can't wait to see what happens!

VQStryker · 10-14-2011, 02:46 PM

Just rods and pistons correct? Looking forward to seeing this

roplusbee · 10-18-2011, 02:14 PM

Oh yeah.............sub'd

98intrigue · 10-18-2011, 05:27 PM

I'm really interested in your build. The only other built 3.7 we know about is Mike's "1000whp" car, but there's not many details regarding his engine build. I will most likely need to build mine very soon. Stupid gremlin noises in my motor...

phunk · 10-18-2011, 07:33 PM

these are pretty noisy motors in terms of what you can hear sitting inside the car. LOTS of transmission noise in these cars.

98intrigue · 10-18-2011, 09:14 PM

Quote:

Originally Posted by phunk

these are pretty noisy motors in terms of what you can hear sitting inside the car. LOTS of transmission noise in these cars.

It's not a transmission noise, unfortunately. It started after my 3rd run at the drag strip and has gotten progressively louder.

phunk · 10-18-2011, 09:32 PM

Any chance that its just an exhaust manifold leak? You have a lot of manifold plumbing for a setup like that. Manifold leaks can sometimes sound deceptive. Hopefully its nothing serious

NYBladeZ · 11-15-2011, 10:10 PM

Phunk what are your impressions on the aeromotive pump? Looking back do you feel that the fuel pump is more than up to the e85 task and do you think it will limit you in the long run? Also, starting to win over the wife on the e85 conversion, what part number is the pump? Did you use the stock fuel lines or run new lines as well?

10-12-2011, 02:54 PM	#92 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	^ yes if you were going to do E85 now with plans for FI in the future, you may as well just go big on the fuel system from the start since you are going to need a complete retune anyway. Toss in some id1000 and the aeromotive pump, i can get you a pump install kit and tell you how to mod the assembly to support the flow of the larger aero pump. then you can tune and get the startup, idle, cruise, etc all perfectly squared away so that once you add the FI all you have to do is fine tune for the higher airflow. yes you could have seperate maps, but that would only work if you run it until totally empty and get all the previous fuel out. converting to e85 doesnt make a flex fuel vehicle, so it has to run on straight 100% the fuel that its tuned for. of course, you dont have to like drain until completely bone dry, a couple % one way or the other should be tolerable, but i would want less than a gallon in the tank when switching back and forth. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

10-13-2011, 12:00 PM	#93 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	I have been having a hard time deciding if I realllly wanted to build the motor in this thing or just "deal with" the power I can make on the stock motor until I get a different car. Well, we picked up again on our billet intake manifold project yesterday, and I am going to need a high power car to test its limits on. So, I went ahead and ordered some pistons. I have a spare long block in my garage at home. Need to pick out some rods and get this to the machine shop. I guess I will have lots of updating to do with my thread over the course of the next few months. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

10-13-2011, 12:37 PM	#95 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	I ordered some custom Wiseco 10:1 pistons __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

10-13-2011, 12:38 PM	#96 (permalink)
GambitX Base Member Join Date: Jul 2011 Location: Tampa FL Posts: 48 Drives: G37 TT Rep Power: 14	Nice!! carrillo or eagle rods? Last edited by GambitX; 10-13-2011 at 01:17 PM.

10-14-2011, 11:42 AM	#97 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	those are sort of opposite ends of the spectrum, i imagine grabbing something in the middle __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

10-14-2011, 02:46 PM	#99 (permalink)
VQStryker Track Member Join Date: Jul 2011 Location: Texas Age: 36 Posts: 659 Drives: :( Rep Power: 15	Just rods and pistons correct? Looking forward to seeing this

10-18-2011, 02:14 PM	#100 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	Oh yeah.............sub'd __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

10-18-2011, 05:27 PM	#101 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 39 Posts: 4,855 Drives: 2014 Viper Rep Power: 430	I'm really interested in your build. The only other built 3.7 we know about is Mike's "1000whp" car, but there's not many details regarding his engine build. I will most likely need to build mine very soon. Stupid gremlin noises in my motor... __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

10-18-2011, 07:33 PM	#102 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	these are pretty noisy motors in terms of what you can hear sitting inside the car. LOTS of transmission noise in these cars. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

10-18-2011, 09:32 PM	#104 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Any chance that its just an exhaust manifold leak? You have a lot of manifold plumbing for a setup like that. Manifold leaks can sometimes sound deceptive. Hopefully its nothing serious __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

11-15-2011, 10:10 PM	#105 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	Phunk what are your impressions on the aeromotive pump? Looking back do you feel that the fuel pump is more than up to the e85 task and do you think it will limit you in the long run? Also, starting to win over the wife on the e85 conversion, what part number is the pump? Did you use the stock fuel lines or run new lines as well? __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Greddy Turbo TI-C or Greddy Spectrum Elite?	Andy124	Intake/Exhaust	32	06-05-2011 03:34 PM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Forced Induction	2	07-17-2010 06:57 AM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Drivetrain/Engine	0	07-16-2010 08:26 PM
TITAN installed Greddy Twin Turbo build Done!!!!!!	kenbains12	Tuning	2	06-10-2010 08:34 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM