First STILLEN Supercharger 370Z swiss

swiss370Z · 09-30-2011, 12:45 PM

Hello geohartanto

Thank you for your input

My tuner has been a month full accessibility to the setup!
He has been a professional for individual adjustment of the settings
We now also with 120 hp plus

The car has now been adapted for long-term test and will run until the end of year so on!

Next spring will be optimized for the setup again and I will further test the car
go on several trips, and audits.

Since its own setting, the Nissan is running smoothly and very powerful!

PS: If someone from Europe to the "STILLEN" kit has an optimal coordination and wishes then ask in any case with me

Best regards from Switzerland

Ivo & Jasmine

Nissan 370Z STILLEN Supercharger - YouTube

swiss370Z · 10-14-2011, 12:28 PM

Dear Z community

Here is the latest draft of our film!

Hope you enjoy

Best regards from Switzerland

Ivo & Jasmine

Nissan 370Z STILLEN Supercharger - YouTube

swiss370Z · 01-22-2012, 12:57 PM

Dear Z- Community

Someone is out there who has installed a 9 PSI pulley on his STILLEN - Kit

I would like to know what role the pulley is mounted on is.
It is the front-mounted or directly to the supercharger unit on the driving axle of the impeller.

http://www.the370z.com/members/swiss...ger2.htmlWould be very grateful for any information and tips.

Best regards from Switzerland
Ivo & Jasmin

swiss370Z · 01-26-2012, 11:51 AM

Help please!!!

vividracing · 01-26-2012, 01:16 PM

The pulley goes on the supercharger, not your stock engine.

Perf.Des · 01-26-2012, 04:48 PM

Quote:

The pulley goes on the supercharger, not your stock engine.

I think he's asking where it goes on the Stillen SC assembly...since there is more than one pully on said assembly.

Nissan370 · 01-28-2012, 12:23 PM

The pulley goes on the back of the blower

RCZ · 01-28-2012, 12:24 PM

I had the 9 psi pulley, no problems whatsoever. I would actually recommend the kit always have the 9 psi pulley...

swiss370Z · 02-11-2012, 12:30 PM

Hello dear community 370Z

I now have the first test results with the newly configured setup of my tuner.
No increase in boost!

Nissan 370Z Forum - swiss370Z's Album: My RIDE - Picture

The vote was carried with UPRev OSIRIS.

Today I ran the first test run on the road!
(No snow on the road!)
But very, very cold! (As in Switzerland is just the way this time of year!!)

As the line shows, the feeling is when accelerating!
Absolutely linear.

Unfortunately, the performance can not be accommodated on the road, as well as in the 3 gear wheels spin .... (-5 ° C)

I've now gone with the kit 10'000 km without any engine problems!

The 370Z is absolutely brilliant with the kit.

Nissan 370Z STILLEN Supercharger - YouTube

As already said, I can gladly help if someone wants to install this kit in Europe.

More information to follow.

See you soon and to all a good time.

Ivo and Jasmin from Switzerland

swiss370Z · 08-26-2012, 01:06 PM

Hello dear community 370Z

Is there someone out there who has a 10 PSI Pulley for the STILLEN SC for sale?
If Yes, please send me a PM!
On 28th August to 5th September i'm in New York for a week!!

Many thanks and greetings from Switzerland

Ivo

PS: By the way!
I have 20,000 Km driven by STILLEN without any problems!

http://www.youtube.com/watch?v=hbVw7hwW-Bk

ANMVQ · 08-27-2012, 04:22 PM

Stillen doesnt make a 10PSI pulley But you might wanna watch my thead, 500WHP Stillen SC. I swaped a bunch of stuff, Tune is this Saturday at 12pm.

swiss370Z · 12-26-2012, 12:12 PM

Hello together

"WHITE DRAGON" UpDate

We have changed the Vortechpulley from 9 to 10 PSI!
At the moment we drive 32,000 km with 490 hp without any problem.
(22'000 km (13'670 miles) with the kit installed)

The next step follows in February.
New impellers from a manufacturer from Germany.

I can only say one thing:
The Z goes like hell and many a Porsche or Ferrari driver
has scratched on the head .....

as the japanese car without problems remained at the tail!

I'm going in March 2013 creating a new film about the unspeakable Ride
capture on video.

Here is the first movie of my project:
Nissan 370Z STILLEN Supercharger & F.I. CBE 18" - YouTube

See you soon and a wonderful holiday season and a great start to 2013

Best regards from Switzerland
Ivo

W.O.W. 370Z · 12-26-2012, 12:28 PM

Whats up with the gay project/build names.

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

Sh0velMan · 12-26-2012, 01:23 PM

Quote:

Originally Posted by W.O.W. 370Z

Whats up with the gay project/build names.

Sent from my SAMSUNG-SGH-I317 using Tapatalk 2

He's Swiss. Cut him some slack, he's from a country that actively hates automobiles and those who love them.

Trips · 12-26-2012, 02:46 PM

Great to hear your enjoying the Z

09-30-2011, 12:45 PM	#31 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Hello geohartanto Thank you for your input My tuner has been a month full accessibility to the setup! He has been a professional for individual adjustment of the settings We now also with 120 hp plus The car has now been adapted for long-term test and will run until the end of year so on! Next spring will be optimized for the setup again and I will further test the car go on several trips, and audits. Since its own setting, the Nissan is running smoothly and very powerful! PS: If someone from Europe to the "STILLEN" kit has an optimal coordination and wishes then ask in any case with me Best regards from Switzerland Ivo & Jasmine Nissan 370Z STILLEN Supercharger - YouTube __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z /// Last edited by swiss370Z; 01-30-2012 at 06:30 AM.

10-14-2011, 12:28 PM	#32 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Dear Z community Here is the latest draft of our film! Hope you enjoy Best regards from Switzerland Ivo & Jasmine Nissan 370Z STILLEN Supercharger - YouTube __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z /// Last edited by swiss370Z; 01-30-2012 at 06:30 AM.

01-22-2012, 12:57 PM	#33 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	9 PSI Pulley STILLEN Dear Z- Community Someone is out there who has installed a 9 PSI pulley on his STILLEN - Kit I would like to know what role the pulley is mounted on is. It is the front-mounted or directly to the supercharger unit on the driving axle of the impeller. http://www.the370z.com/members/swiss...ger2.htmlWould be very grateful for any information and tips. Best regards from Switzerland Ivo & Jasmin Cheech likes this. __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z /// Last edited by swiss370Z; 01-22-2012 at 12:59 PM.

01-26-2012, 11:51 AM	#34 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Help please!!! __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

01-26-2012, 01:16 PM	#35 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 38 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 39	The pulley goes on the supercharger, not your stock engine. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

01-28-2012, 12:23 PM	#37 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	The pulley goes on the back of the blower __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

01-28-2012, 12:24 PM	#38 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	I had the 9 psi pulley, no problems whatsoever. I would actually recommend the kit always have the 9 psi pulley...

02-11-2012, 12:30 PM	#39 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Hello dear community 370Z I now have the first test results with the newly configured setup of my tuner. No increase in boost! Nissan 370Z Forum - swiss370Z's Album: My RIDE - Picture The vote was carried with UPRev OSIRIS. Today I ran the first test run on the road! (No snow on the road!) But very, very cold! (As in Switzerland is just the way this time of year!!) As the line shows, the feeling is when accelerating! Absolutely linear. Unfortunately, the performance can not be accommodated on the road, as well as in the 3 gear wheels spin .... (-5 ° C) I've now gone with the kit 10'000 km without any engine problems! The 370Z is absolutely brilliant with the kit. Nissan 370Z STILLEN Supercharger - YouTube As already said, I can gladly help if someone wants to install this kit in Europe. More information to follow. See you soon and to all a good time. Ivo and Jasmin from Switzerland __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z /// Last edited by swiss370Z; 02-11-2012 at 12:35 PM.

08-26-2012, 01:06 PM	#40 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Hello dear community 370Z Is there someone out there who has a 10 PSI Pulley for the STILLEN SC for sale? If Yes, please send me a PM! On 28th August to 5th September i'm in New York for a week!! Many thanks and greetings from Switzerland Ivo PS: By the way! I have 20,000 Km driven by STILLEN without any problems! http://www.youtube.com/watch?v=hbVw7hwW-Bk __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

08-27-2012, 04:22 PM	#41 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Stillen doesnt make a 10PSI pulley But you might wanna watch my thead, 500WHP Stillen SC. I swaped a bunch of stuff, Tune is this Saturday at 12pm. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

12-26-2012, 12:12 PM	#42 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 15	Hello together "WHITE DRAGON" UpDate We have changed the Vortechpulley from 9 to 10 PSI! At the moment we drive 32,000 km with 490 hp without any problem. (22'000 km (13'670 miles) with the kit installed) The next step follows in February. New impellers from a manufacturer from Germany. I can only say one thing: The Z goes like hell and many a Porsche or Ferrari driver has scratched on the head ..... as the japanese car without problems remained at the tail! I'm going in March 2013 creating a new film about the unspeakable Ride capture on video. Here is the first movie of my project: Nissan 370Z STILLEN Supercharger & F.I. CBE 18" - YouTube See you soon and a wonderful holiday season and a great start to 2013 Best regards from Switzerland Ivo __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z /// Last edited by swiss370Z; 12-26-2012 at 10:40 PM.

12-26-2012, 12:28 PM	#43 (permalink)
W.O.W. 370Z A True Z Fanatic Join Date: Mar 2010 Location: Miami Posts: 1,757 Drives: 2010 Touring Sport Z Rep Power: 19	Whats up with the gay project/build names. Sent from my SAMSUNG-SGH-I317 using Tapatalk 2 acelesson likes this.

12-26-2012, 02:46 PM	#45 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Great to hear your enjoying the Z swiss370Z likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN 370Z Supercharger System - Announcement!!!	Kyle@STILLEN	Forced Induction	2643	01-02-2022 10:28 PM
370Z Stillen supercharger DIY instructions	wortmeister	DIY Section (Do-It-Yourself)	11	06-01-2012 08:09 AM
Stillen Intercooled Supercharger for the 370z!	DriveLineEric	Drivetrain/Engine	14	03-09-2011 05:31 PM
370z/G37 Stillen Supercharger Kit - Like new Condition	weiboy718	Parts for sale (Private Classifieds)	64	01-30-2011 12:28 PM
STILLEN Introduces 515hp Supercharger System for Nissan 370Z / Infiniti G37	speed_BMW330i	Forced Induction	11	03-31-2010 10:58 AM