![]() |
Originally Posted by Econ doesnt start smoothly, uneasy idling, decreased acceleration, decreased gas mileage, gas odor inside cabin am i hitting anything? You covered a lot of it. There's really
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#11 (permalink) | |
NOT AN ACTIVE SPONSOR. DO NOT BUY
Join Date: Dec 2008
Location: CALIFORNIA
Posts: 913
Drives: 370Z
Rep Power: 18 ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
Making the statement that the car had a bad injector and that is why the car was detonating is such a blanket statement and is inaccurate. We spent 20 hrs diagnosing this particular car and logging all the ECU parameters via Cipher and Nissan's ConsultIII Factory Diagnostic Tool. At no point was there any indication of one bad injector. If you have a bad injector on one of the banks of the engine, your correction factor will be different since one wideband on a particular bank will read richer or leaner. Eric's car did not have that symptom. If you have a bad injector, you will have a rich or a lean code since the bad injector will spray too much or not enough fuel which will alter the AFR target. The factory ECU pays very close attention to the correction factor and the differences between bank 1 and bank 2. The minute it sees any serious variation, it will throw a code. Another indication of knowing whether you have a problem with a particular cylinder with a bad injector is to remove and check the spark plugs. This is an old fashioned way of getting a clear idea of how your combustion chamber is operating. If you remove the spark plugs and they all have a similar brownish color, that is an indication of a nice healthy combustion. When you have a bad injector, you'll notice that particular spark plug will be extremely white from running lean, or extremely black from running excessively rich. Now if we start talking about spray pattern, this will open up a completely different front. Keep in mind that the DW injectors are modified Denso injectors although they will never be perfect like an OEM factory unmodified injector. As far as why Eric's car was not running properly, the information was shared with Eric and I was very tempted to really share all my logs and the things I found, but I did not want to start a shitstorm, so I left it alone. Sam Last edited by SAM@GTM; 06-15-2011 at 05:45 PM. |
|
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY-Door handle removal | bumblez | DIY Section (Do-It-Yourself) | 104 | 09-29-2017 07:00 PM |
Door handle rattles from outside...anyone? | zaust | Exterior & Interior | 1 | 02-27-2012 03:21 PM |
handle noise?? | shl468 | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 0 | 06-02-2010 10:45 PM |
Help with handle scratches | boomboom | Exterior & Interior | 2 | 05-04-2010 11:34 PM |
How much WHP will the 7spd AT handle stock? | CGMobile370Z | Engine & Drivetrain | 1 | 03-21-2010 10:31 AM |