How much power do you think is safe on stock internals?

RCZ · 05-29-2011, 12:55 PM

Quote:

Originally Posted by Blue370tt

Whatever......I am tired of ALL THE ARMCHAIR QUARTERBACKS on this site! First it was YOUR 7AT CANT HANDLE FI.....then YOUR 7AT IS GOING TO BLOW.......NOW.....STOCK INTERNALS CANT HANDLE OVER 450 HP.........ALL THESE THINGS TURNED OUT TO BE NOT TRUE.........

My advice to all the nay sayers.......GET A LIFE!

I would take bets on which part of your car would fail first on a trackday....although I don't think we would really find out since the car would go into limp mode before you could blow anything up.

I'm kidding, it would totally last, chill out! 11:1 Twin turbo car with an automatic transmission is BULLETPROOF. Everybody knows that.

Red__Zed · 05-29-2011, 12:56 PM

My last drag car was doing ~160 at the end of a SQM. Seemed to not be that much rougher than when it had been trapping only 145 or so.

Nismo370 · 05-29-2011, 01:12 PM

We aren't talkin bout your last drag car, we are talking about a boosted 370z with a stock block please keep the car at hand on discussion thanx.

Red__Zed · 05-29-2011, 01:15 PM

Quote:

Originally Posted by Nismo370

We aren't talkin bout your last drag car, we are talking about a boosted 370z with a stock block please keep the car at hand on discussion thanx.

You are making the claim that a high speed pull is somehow significantly rougher on the engine. I'm telling you that with several rebuild of my F20 (F25?), several hundred drag passes trapping 145 treated it about the same as trapping 160, as well as doing some standing miles.

Red__Zed · 05-29-2011, 01:15 PM

Pretty sure that is relevant, unless you think the VQ is different in some way...

Nismo370 · 05-29-2011, 01:25 PM

You cannot compare to different motors, and I'm going to leave it at that.

Red__Zed · 05-29-2011, 01:31 PM

Quote:

Originally Posted by Nismo370

You cannot compare to different motors, and I'm going to leave it at that.

So getting damaged by high speed pulls is a unique characteristic to the VQ?

birdmanx1 · 05-29-2011, 01:39 PM

Quote:

Originally Posted by Blue370tt

Whatever......I am tired of ALL THE ARMCHAIR QUARTERBACKS on this site! First it was YOUR 7AT CANT HANDLE FI.....then YOUR 7AT IS GOING TO BLOW.......NOW.....STOCK INTERNALS CANT HANDLE OVER 450 HP.........ALL THESE THINGS TURNED OUT TO BE NOT TRUE.........

My advice to all the nay sayers.......GET A LIFE!

what's this story of your life with the 7AT all over the place? Everyone is now well aware as to how great the 7AT transmission handles on the Z whether FI or not, would you like a cookie or some?

You got a cool car that can handle a lot, beat the crap out of your car and have fun with it. Take it easy on the capital letters orgies dude, we got your point.

esfourteen · 05-29-2011, 02:09 PM

I've been running around my condo holding my supercharger making boost noises, I estimate I'm making somewhere around 600rwhp and my dog has seen me do numerous hard launches from the living room to my office. So far I'm a bit tired but theres no signs of compression loss and my leak down is consistent at ~8% across the board. I've sent out a urine sample to blackstone to examine for any metal shavings/signs of bearing failure. In conclusion everyone needs to chill out.

Red__Zed · 05-29-2011, 02:14 PM

Quote:

Originally Posted by esfourteen

I've been running around my condo holding my supercharger making boost noises, I estimate I'm making somewhere around 600rwhp and my dog has seen me do numerous hard launches from the living room to my office. So far I'm a bit tired but theres no signs of compression loss and my leak down is consistent at ~8% across the board. I've sent out a urine sample to blackstone to examine for any metal shavings/signs of bearing failure. In conclusion everyone needs to chill out.

RCZ · 05-29-2011, 02:18 PM

lmao....

b1adesofcha0s · 05-29-2011, 02:19 PM

Quote:

Originally Posted by esfourteen

I've been running around my condo holding my supercharger making boost noises, I estimate I'm making somewhere around 600rwhp and my dog has seen me do numerous hard launches from the living room to my office. So far I'm a bit tired but theres no signs of compression loss and my leak down is consistent at ~8% across the board. I've sent out a urine sample to blackstone to examine for any metal shavings/signs of bearing failure. In conclusion everyone needs to chill out.

birdmanx1 · 05-29-2011, 04:15 PM

Rofl

FL 4Motion · 05-29-2011, 07:11 PM

Quote:

Originally Posted by esfourteen

I've been running around my condo holding my supercharger making boost noises, I estimate I'm making somewhere around 600rwhp and my dog has seen me do numerous hard launches from the living room to my office. So far I'm a bit tired but theres no signs of compression loss and my leak down is consistent at ~8% across the board. I've sent out a urine sample to blackstone to examine for any metal shavings/signs of bearing failure. In conclusion everyone needs to chill out.

uh oh, better go change your shorts...

jnaut · 05-29-2011, 08:56 PM

Quote:

Originally Posted by Nismo370

I have 15 1/4mile passes on my car and lots and lots of highway pulls AND VIDEOS.

Where is your time slips?

View Poll Results: What is the WHP ceiling of stock internals?
400WHP	16	8.51%
450WHP	50	26.60%
500WHP	64	34.04%
550WHP	33	17.55%
600WHP	25	13.30%
Voters: 188. You may not vote on this poll

05-29-2011, 01:12 PM	#93 (permalink)
Nismo370 Enthusiast Member Join Date: Sep 2009 Location: Dont Worry Bout It... Posts: 333 Drives: 09 370Z NismoTT Rep Power: 16	We aren't talkin bout your last drag car, we are talking about a boosted 370z with a stock block please keep the car at hand on discussion thanx. __________________ GTM Twin Turbo 583whp 468trq Uncorrected @ 12psi.

05-29-2011, 01:25 PM	#96 (permalink)
Nismo370 Enthusiast Member Join Date: Sep 2009 Location: Dont Worry Bout It... Posts: 333 Drives: 09 370Z NismoTT Rep Power: 16	You cannot compare to different motors, and I'm going to leave it at that. __________________ GTM Twin Turbo 583whp 468trq Uncorrected @ 12psi.

05-29-2011, 02:09 PM	#99 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	I've been running around my condo holding my supercharger making boost noises, I estimate I'm making somewhere around 600rwhp and my dog has seen me do numerous hard launches from the living room to my office. So far I'm a bit tired but theres no signs of compression loss and my leak down is consistent at ~8% across the board. I've sent out a urine sample to blackstone to examine for any metal shavings/signs of bearing failure. In conclusion everyone needs to chill out. __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

05-29-2011, 04:15 PM	#103 (permalink)
birdmanx1 A True Z Fanatic Join Date: Jun 2010 Location: Baltimore, MD Age: 95 Posts: 3,175 Drives: 370z Nismo Rep Power: 24	Rofl __________________ 370Z NISMO #0462 \| ClearBra \| 3M tint \| Head/Taillights \| Dynamat \| Black Roof \| Tommy Kaira HB \| CF Parts \| Berk HFCs \| FI SS \| NST Pulleys \| Takeda aFe \| K&N \| H&R Spacers \| Swift Spec R \| SPC F&R \| Zuperman M370 Nismo Vid \| Nismo Journal \| Nismo Rumble

05-29-2011, 12:56 PM	#92 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	My last drag car was doing ~160 at the end of a SQM. Seemed to not be that much rougher than when it had been trapping only 145 or so.

05-29-2011, 01:15 PM	#95 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	Pretty sure that is relevant, unless you think the VQ is different in some way...

05-29-2011, 02:18 PM	#101 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	lmao....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: VQ37VHR Engine Internals Pistons, Rods, Stroker Kits	George@GTM	Forced Induction	92	12-04-2012 05:06 PM
Safe amount of HP for stock engine?	$hytz_!ntyn$e	Forced Induction	75	07-26-2012 11:09 AM
How much power will the stock internals hold?	Mythic	Forced Induction	26	11-16-2010 06:14 PM
power rating for stock radio?	samb03	Audio & Video	14	11-15-2010 04:22 PM
Help Needed: Stock Bridgestones safe in 20-30 deg F?	SeattleLion	Wheels & Tires	3	10-09-2010 10:29 PM