GTM Stage 2 Supercharger Preliminary Testing Results

SAM@GTM

After months and months of tweaking, designing, we are finally able to throw our stage 2 test car on the dyno to get some results. Keep in mind our intention here is to find what the supercharger's capability is. We were very pleased to find that the unit, although larger in size, was able to keep a nice flat torque curve with better top end power.

We feel this result can give us a very accurate indication of how well the head unit is reacting since we are using the same car, same gas, same pulley. We are still not done testing the supercharger and our multiple intake designs that have been on and off many times to optimize the setup.

Here are the changes we made differentiates the two stages:

1) Urethane Engine Mounts to gain room for the bigger compressor housing which vastly improved engine response by getting rid of the mushy stock mounts.
2) New Intake Design
3) New Compressor Housing design
4) New Supercharger Outlet Piping
5) 3" MAF housings


The results you see are fresh off the press this morning's dyno pulls. After the dyno sessions, the vehicle was off the dyno and the supercharger is coming off the car for the 100th damn time.


05-20-2011 UPDATE

After literally installing and uninstalling the supercharger about 10 times this week, countless pulley changes with different intake and tunes combination, We are happy to report that the hard work had finally paid off with some extraordinary results.

Here is some New dyno results


07-07-2011 UPDATE

Here are some new dyno sheets from a 370Z Stage 2 Supercharger with the following mods: test pipes, cat-back and our 8psi pulley.

As you can see, it's pretty beast!


07-23-2011 UPDATE

A little Teaser video

esfourteen

Awesome results Sam, great power at 10psi. Are you planning on selling those stiffer motor mounts separately?

__________________
Build Thread | GTM TT Install Thread | Engine Build Thread

SAM@GTM

Yes we will, they will make a nice upgrade on their own, of course they are not for everyone.

Sam

DarkZide

Nice! Looks like ill be going stage 2

Mr&Mrs

Very nice in for updates.

__________________
Project Z <--Click - Check out the link too many mods to list!

XwChriswX

Sam, how are you thinking this will work with LTH/CBE?

Possible to tag 500whp?

__________________

Bonnie - Stage 2, Audio build coming this fall!
R.I.P. Abby 3/29/10 - 3/30/14

SAM@GTM

Not sure about 500 to the wheels, but the car that we are testing with right now has been one of the lowest power cars we've tested. Also, we are planning on testing with cat-back, test pipes, and EQUAL Length headers.

Stay tuned.

Z eliminator

I see the Z Eliminator going low 11's in the 1/4 mile.
500 rwhp = 10.9
The long wait was worth it.
Congratulations Sam.
470= 11.29 to 11.38.
" SOON TO BE A GTR'S WORST NIGHTMARE "
Z

__________________
12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

roplusbee

Awesome SAM. I am going to touch base with Zerolift again and talk to Mike about going with this instead of the TT. This kit w/ LTHs is what I wanted all along anyway. You are my hero!

__________________
2007 350Z NISMO #0618: Zerolift | UPREV | F.I. | Greddy | Competition Clutch | Injector Dynamics | Aeromotive | Pioneer | JL

Mr.Squeeze

Very impressive results are you guys going to use a smaller pulley with this set up?

__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

SAM@GTM

We are at the maximum pulley size right now and the size bigger then that only made few horses less.

We don't need smaller pulley, We need less overlap .

Sam

Z eliminator

Just wait till i give it some good Canadian cold fresh air and some good Canadian 94 octane gas.
Now we add your new intake manifold and we could see some major RWHP
add the VVEL control
and you will the GTM trackion control
Yes my friends the Z's 370 z is going to be a screamer.

__________________
12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

Mr.Squeeze

Understood cant wait to see this when you work out all the kinks.

VVEL control

__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

roplusbee

That would be the icing on the cake. Sounds delicious............

__________________
2007 350Z NISMO #0618: Zerolift | UPREV | F.I. | Greddy | Competition Clutch | Injector Dynamics | Aeromotive | Pioneer | JL

leighspped

Sounds tasty can't wait to hear how it works with LTH

__________________
Performance: Fast Intentions LTH + CBX + Injen CAI + UpRev + KW3 + Whiteline sway bars + short throw shifter + 34r oil cooler = 335whp + (OS Giken Clutch and Diff)
Interior : Recaro seat + Alpine HU and Rockford Fosgate Amp and Speakers + Passport 9500ci + JDM shift knob + LED's Forged avant garde m310's 19x9 19x12 RE-11