GTM Stage 2 Supercharger Preliminary Testing Results

NewYorkJon34 · 05-26-2011, 11:48 AM

There's not going to be a stage 3, the stage 2 is using the "stage 4" blower

Staples · 05-30-2011, 07:40 PM

Quote:

Originally Posted by JB-370z

So if the Stage 2 is makeing this kind of power @ 11psi. No telling what the Stage 3 is going to do power wise. Would there be a need for a built block with a Stage 3?

Well the only thing that can be done is a smaller pulley for more boost, if that's even possible. GTM is already using the biggest charger Rotrex offers, and I doubt they're going to switch companies with all the R&D involved in their current setup. Besides, 400-470whp should be plenty for 90% of boosted drivers.

NewYorkJon34 · 05-30-2011, 08:21 PM

Looks like I'm in the other 10%, lol

fuct · 05-31-2011, 09:27 AM

heck 470 to the wheels on a stage two........ sign me up!!!!! (now how much do slightly used kidneys go for??)

weiboy718 · 05-31-2011, 02:21 PM

Quote:

Originally Posted by fuct

heck 470 to the wheels on a stage two........ sign me up!!!!! (now how much do slightly used kidneys go for??)

I think it's illegal to sell human parts lol.

fuct · 05-31-2011, 04:04 PM

Quote:

Originally Posted by weiboy718

I think it's illegal to sell human parts lol.

even if its your own?

b1adesofcha0s · 05-31-2011, 04:14 PM

Quote:

Originally Posted by fuct

even if its your own?

Sell it on the black market

Z eliminator · 06-01-2011, 09:13 AM

Im so glad that i bought the GTM traction control with launch control.
Sam said im going to need it.

KillerBee370 · 06-01-2011, 10:10 AM

Quote:

Originally Posted by Z eliminator

Im so glad that i bought the GTM traction control with launch control.
Sam said im going to need it.

What is that? Part of the reflash?

jran76 · 06-01-2011, 11:17 AM

Quote:

Originally Posted by KillerBee370

What is that? Part of the reflash?

It is a separate traction control "box" (controller) made by Race Logic that is setup to be plug-and-play by GTM, and includes a harness and full setup. It runs an around $2000+ from GTM (which is about 3x what the parts cost from Race Logic, but it is ready to go...).

Racelogic - Experts in data logging, video logging & GPS

GTM Motorsports*::*Traction Control*::*GTM RACE LOGIC TRACTION CONTROL PNP

bullitt5897 · 06-01-2011, 11:32 AM

The Racelogic module and needed wheel speed sensors cost over $1600 add in the controller and PnP harness and I feel it is fairly priced.

esfourteen · 06-01-2011, 11:54 AM

Quote:

Originally Posted by Bullitt@UAMotorsports

The Racelogic module and needed wheel speed sensors cost over $1600 add in the controller and PnP harness and I feel it is fairly priced.

the abs sensors from the Z don't work with the race logic?

jran76 · 06-01-2011, 12:11 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

The Racelogic module and needed wheel speed sensors cost over $1600 add in the controller and PnP harness and I feel it is fairly priced.

Quote:

Originally Posted by esfourteen

the abs sensors from the Z don't work with the race logic?

I was told we could use the existing ABS/speed sensors, and it was just the harness and/or wiring that would be needed (This did not come from GTM). Race Logic said the sensors are only needed for cars that do not have ABS/speed sensors; with a few exceptions. You can get the module and analog controller for under $1000. I can pick it up in Europe for around $800 (It lists for 595 British Pounds for the unit with traction and launch control).

The wiring is not complicated at all if you are willing to hack up the existing factory wiring. It could easily be done in less than a day with a factory service manual and the Race Logic instructions if you are technically competent.

I think it is great that GTM is offering this as plug-and-play, and if you think it is a good value, that is all that matters. I personally wouldn't pay $1500 for a harness, but there is definitely some appeal to doing so.

SAM@GTM · 06-01-2011, 08:31 PM

Quote:

Originally Posted by jran76

I was told we could use the existing ABS/speed sensors, and it was just the harness and/or wiring that would be needed (This did not come from GTM). Race Logic said the sensors are only needed for cars that do not have ABS/speed sensors; with a few exceptions. You can get the module and analog controller for under $1000. I can pick it up in Europe for around $800 (It lists for 595 British Pounds for the unit with traction and launch control).

The wiring is not complicated at all if you are willing to hack up the existing factory wiring. It could easily be done in less than a day with a factory service manual and the Race Logic instructions if you are technically competent.

I think it is great that GTM is offering this as plug-and-play, and if you think it is a good value, that is all that matters. I personally wouldn't pay $1500 for a harness, but there is definitely some appeal to doing so.

Where did get the price of 1500 for the harness, does that mean that racelogic box only cost 700 dollars per your statement and calculations.

FYI you could not wire the car in a day, wiring the abs sensors alone witch you will have to remove the abs unit to do is a 6 hour job .

It takes less then 3 mints to install our system.

Sam

NewYorkJon34 · 06-01-2011, 08:35 PM

Sam, did you get my PM & paypal deposit?

05-26-2011, 11:48 AM	#211 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	There's not going to be a stage 3, the stage 2 is using the "stage 4" blower __________________ NewYorkJon34's Ultimate Z Build

05-30-2011, 08:21 PM	#213 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Looks like I'm in the other 10%, lol __________________ NewYorkJon34's Ultimate Z Build

06-01-2011, 09:13 AM	#218 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Im so glad that i bought the GTM traction control with launch control. Sam said im going to need it. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

06-01-2011, 11:32 AM	#221 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	The Racelogic module and needed wheel speed sensors cost over $1600 add in the controller and PnP harness and I feel it is fairly priced. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-01-2011, 08:35 PM	#225 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Sam, did you get my PM & paypal deposit? __________________ NewYorkJon34's Ultimate Z Build

05-31-2011, 09:27 AM	#214 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	heck 470 to the wheels on a stage two........ sign me up!!!!! (now how much do slightly used kidneys go for??)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Supercharger Stage 1 w/ F.I. LTH	theDreamer	Forced Induction	140	03-16-2013 05:50 PM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.	SAM@GTM	Forced Induction	311	09-07-2011 04:42 AM
GTM supercharger stage 1 videos	Fezzik	Forced Induction	23	05-10-2011 12:34 PM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.	SAM@GTM	Forced Induction	254	08-11-2010 11:59 AM