Pistons, Rods, and head studs.

Vinny · 05-14-2011, 08:41 AM

Hey everyone! I bought a stage 2 TT kit for my Z a few months ago, and I'm looking into upgrading some of the internals. Does anyone have an idea of the labor time would be for new pistons-rods and head studs? I'm assuming I'd have to replace my fuel pump/injectors along with that, correct?

SPOHN · 05-14-2011, 09:06 AM

Why would you buy a TT setup and not really have a clue of what's needed or what has to be done? If you have to ask, maybe you you need to rethink some things and do so searching. Not trying to be an a$$. Just doesn't add up.

Nixlimited · 05-14-2011, 09:13 AM

Quote:

Originally Posted by SPOHN

Why would you buy a TT setup and not really have a clue of what's needed or what has to be done? If you have to ask, maybe you you need to rethink some things and do so searching. Not trying to be an a$$. Just doesn't add up.

A lot of people are running stage 2 setups without upgrading their internals first so I think you're a bit off base.

As to the OP, I would suggest you call GTM or another local shop where you may get your work done. Not many people on this board seem to have that kind of work done yet.

Vinny · 05-14-2011, 09:19 AM

Hey spohn, why would you waist your time posting something completely useless? You're implying everyone out there that wants to enjoy the fun of a forced induction car should go get a mechanics license first? Stop being a douche and try doing something helpful next time, or don't post.

SPOHN · 05-14-2011, 09:29 AM

Quote:

Originally Posted by Vinny

Hey spohn, why would you waist your time posting something completely useless? You're implying everyone out there that wants to enjoy the fun of a forced induction car should go get a mechanics license first? Stop being a douche and try doing something helpful next time, or don't post.

Not wasting. Just doesn't seem like you have clue to what your getting into. You already have purchased a TT kit and your asking if you need a fuel pump. Just seems you need to learn some more things about these setups and what your in for. It's called constructive criticism. I know alot of people can't take that these days.

So on a side note, it would cost you 5K plus for a shortblock and labor. That's a rough estimate

Vinny · 05-14-2011, 09:30 AM

Thanks nixlimited, I'll do that. I spoke to GTM about 3 weeks ago, And I was supposed to get a package/estimate, but haven't gotten an answer yet. I wanted to get an opinion from members on here before talking with the shop I usually deal with, because they tend to overcharge.

Vinny · 05-14-2011, 09:32 AM

I have a fuel pump.. I was asking if I needed to upgrade it. I bought the turn-key kit from GTM. Now please don't clutter the rest of my post with your "constructive criticism", I'd like to get some useful advice.

Lemers · 05-14-2011, 09:33 AM

He doesn't really need to know anything about turbo set ups if he has the money to do anything needed.

SPOHN · 05-14-2011, 09:34 AM

What fuel pump to you have now? What HP do you plan to run? This answer will determine what type of fuel system you'll need to run.

Vinny · 05-14-2011, 09:37 AM

Walbro 255lph, shooting for 600whp.

SPOHN · 05-14-2011, 09:42 AM

Quote:

Originally Posted by Vinny

Walbro 255lph, shooting for 600whp.

In that case (this is MO) I'd run complete return fuel system. GTM stage two kit seen here.

GTM Motorsports*::*FUEL SYSTEM*::*GTM STAGE 2 FUEL SYSTEM

You also could go to this type of fuel pump which is a step up.

http://www.forgedperformance.com/sto...e=0&featured=Y

jnaut · 05-14-2011, 08:59 PM

Quote:

Originally Posted by Vinny

Hey everyone! I bought a stage 2 TT kit for my Z a few months ago, and I'm looking into upgrading some of the internals. Does anyone have an idea of the labor time would be for new pistons-rods and head studs? I'm assuming I'd have to replace my fuel pump/injectors along with that, correct?

Labor time i would assume around 40 hrs. pulling the engine , about 16 hrs to r & r engine plus another 24 (ish) to rebuild engine plus machine shop for balancing. as for fuel pump no and if your keep the boost levels at a reasonable level then no injectors either.

Are you replacing rods/pistions for "piece of mind"? or to turn boost levels up?

Vinny · 05-14-2011, 09:37 PM

Would be to turn up the boost. Not by much, but reaching for 600whp. I'm assuming im right around 530whp at 10-11 psi, so it wouldnt be too big of a jump I don't think, correct me if I'm wrong.

toner123 · 05-14-2011, 10:38 PM

GTM got 611 WHP out of the fuel pump you currently got installed. If you look in the thread I made about building the block there is some good info in there. I have been waiting for a package price also from sam but no need to rush since this will be done the earliest in winter.

Vinny · 05-15-2011, 10:04 AM

So in that case, I could potentially keep the same fuel system, and just replace pistons/connecting rods? I was told by another member that head studs were also required, can someone shed some light on this?
Assuming I'm not way off on this, I would think around 15psi would suffice to hit 600whp or darn close, too much for the injectors?

05-14-2011, 08:41 AM	#1 (permalink)
Vinny Base Member Join Date: Jun 2010 Location: Montreal, Qc Posts: 246 Drives: 09 Fairlady Z tt Rep Power: 15	Pistons, Rods, and head studs. Hey everyone! I bought a stage 2 TT kit for my Z a few months ago, and I'm looking into upgrading some of the internals. Does anyone have an idea of the labor time would be for new pistons-rods and head studs? I'm assuming I'd have to replace my fuel pump/injectors along with that, correct?

05-14-2011, 09:06 AM	#2 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	Why would you buy a TT setup and not really have a clue of what's needed or what has to be done? If you have to ask, maybe you you need to rethink some things and do so searching. Not trying to be an a$$. Just doesn't add up. __________________

05-14-2011, 09:19 AM	#4 (permalink)
Vinny Base Member Join Date: Jun 2010 Location: Montreal, Qc Posts: 246 Drives: 09 Fairlady Z tt Rep Power: 15	Hey spohn, why would you waist your time posting something completely useless? You're implying everyone out there that wants to enjoy the fun of a forced induction car should go get a mechanics license first? Stop being a douche and try doing something helpful next time, or don't post. Last edited by Vinny; 05-14-2011 at 09:21 AM.

05-14-2011, 09:33 AM	#8 (permalink)
Lemers A True Z Fanatic Join Date: Mar 2010 Location: Izmir, Turkey Posts: 15,371 Drives: 2012 Traverse LTZ Rep Power: 53	He doesn't really need to know anything about turbo set ups if he has the money to do anything needed. __________________ 2010 Black Cherry Touring/Sport/Nav Now - 2012 Travese LTZ until I leave for Turkey

05-14-2011, 09:34 AM	#9 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	What fuel pump to you have now? What HP do you plan to run? This answer will determine what type of fuel system you'll need to run. __________________ Last edited by SPOHN; 05-14-2011 at 09:54 AM.

05-14-2011, 09:30 AM	#6 (permalink)
Vinny Base Member Join Date: Jun 2010 Location: Montreal, Qc Posts: 246 Drives: 09 Fairlady Z tt Rep Power: 15	Thanks nixlimited, I'll do that. I spoke to GTM about 3 weeks ago, And I was supposed to get a package/estimate, but haven't gotten an answer yet. I wanted to get an opinion from members on here before talking with the shop I usually deal with, because they tend to overcharge.

05-14-2011, 09:32 AM	#7 (permalink)
Vinny Base Member Join Date: Jun 2010 Location: Montreal, Qc Posts: 246 Drives: 09 Fairlady Z tt Rep Power: 15	I have a fuel pump.. I was asking if I needed to upgrade it. I bought the turn-key kit from GTM. Now please don't clutter the rest of my post with your "constructive criticism", I'd like to get some useful advice.

05-14-2011, 09:37 AM	#10 (permalink)
Vinny Base Member Join Date: Jun 2010 Location: Montreal, Qc Posts: 246 Drives: 09 Fairlady Z tt Rep Power: 15	Walbro 255lph, shooting for 600whp.

05-14-2011, 09:37 PM	#13 (permalink)
Vinny Base Member Join Date: Jun 2010 Location: Montreal, Qc Posts: 246 Drives: 09 Fairlady Z tt Rep Power: 15	Would be to turn up the boost. Not by much, but reaching for 600whp. I'm assuming im right around 530whp at 10-11 psi, so it wouldnt be too big of a jump I don't think, correct me if I'm wrong.

05-14-2011, 10:38 PM	#14 (permalink)
toner123 Track Member Join Date: May 2010 Location: chesapeake va Age: 39 Posts: 823 Drives: TT 370z Touring/SP Rep Power: 16	GTM got 611 WHP out of the fuel pump you currently got installed. If you look in the thread I made about building the block there is some good info in there. I have been waiting for a package price also from sam but no need to rush since this will be done the earliest in winter.

05-15-2011, 10:04 AM	#15 (permalink)
Vinny Base Member Join Date: Jun 2010 Location: Montreal, Qc Posts: 246 Drives: 09 Fairlady Z tt Rep Power: 15	So in that case, I could potentially keep the same fuel system, and just replace pistons/connecting rods? I was told by another member that head studs were also required, can someone shed some light on this? Assuming I'm not way off on this, I would think around 15psi would suffice to hit 600whp or darn close, too much for the injectors?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS Tien Tie Rods FS for 350z	lastblueprint	Parts for sale (Private Classifieds)	1	12-21-2013 10:59 PM
GT Motorsports: VQ37VHR Engine Internals Pistons, Rods, Stroker Kits	George@GTM	Forced Induction	92	12-04-2012 04:06 PM
Hooters & Hot Rods - Orlando	Osiris	South East Region	2	03-12-2011 10:54 AM
Wiseco Pistons now available.	ejrives	Engine & Drivetrain	17	09-25-2009 02:26 PM
DIY Low Compression Pistons	MightyBobo	The Lounge (Off Topic)	15	09-04-2009 02:00 AM