Achieving 600 RWHP

goeagles11

Not what I heard - I heard directly from a customer whose motor blew that it was due to him being sent a prototype pulley which had not been properly tested yet. Doesn’t sound very turnkey or finished....

Regardless I hope they work out the kinks and it is a viable option for anyone wanting to go forced induction. I’ll patiently wait for other reviews.

Elmo370z

I’ve heard that.

bullitt5897

Did the customer tell you that he switched tuners mid tune? Because the tuner who was tuning his car remotely said it wasn’t ready... then randomly I got a text from him stating how much power he made. I asked how did he know... since Martin of RS Enthralpy was tuning his car remotely didn’t even know he was on the dyno!!! When your tuner doesn’t know your dynoing that’s not a good sign.

After being told what he was making I told him he was on borrowed time if he continues to beat on the car. He was making more tq than the stock block can take! He proceeded to race Modded GTRs and beat on the car. Eventually the motor let go... why? Because he switched tuners and didn’t tell anyone. He was running e85 and beating on the car. He was making over 500ftlbs by 2600rpm!!!

Ask any VQ tuner the stock block is only good for 500-550ftlbs of tq and for a limited time. When your tq is over 500ftlbs throughout the powerband no your motor isn’t going to last.

He was given a 14psi pulley and it was told to him that’s what he was getting. It was the exact pulley from zdayz!!! That’s right the exact pulley on a car that I personally beat on for a full week with a proper tune keeping tq and hp in check!

He is pissed because he blew his motor after being warned time and time again by at least three people: me, the tuner, and RJM!

__________________
Shop Cars: 2013 318whp Nismo VspecII 370z *SOLD*, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054