First top mount single turbo 370Z

SPOHN · 05-04-2011, 09:29 PM

Quote:

Originally Posted by '10Anamoly

See I caught him wit a right hook,
caught him wit a jab,
caught him wit an uppercut,
kicked him in his a*s.

JB-370z · 05-04-2011, 09:37 PM

1 turbo, 2 intake manifolds, will the pressure make it to both manifolds simultaneousnesly? if not does it make it hard to tune? Just wondering why more companies don't release a single turbo kit for around the same price point as a supercharger? What is the challenge with single turbo on a V6 dual inakes vs Twins? LOL sorry soo many questions but my knowledge is limited when it comes to this kind of setup.

A4RingedONE8T · 05-04-2011, 09:52 PM

Quote:

Originally Posted by christian370z

I was wondering this too, that will be a huge amount of intense heat confined to an already hot engine bay. Some venting via the hood is probably the easiest way to help that problem out, are there any additional cooling plans right now?

Everything will be heat wrapped plus a turbo blanket, Setrab 24 row oil cooler, and an extra quart of oil with the oil pan spacer, all should be good!

Quote:

Originally Posted by fuct

is my understanding correct to say the single turbo will reach full boost later than two twins? and will produce more power up top but sacrifice low end power and torque? :\

Not necessarily. I'm pretty sure this setup is going to have better powerband as well as peak power than the twin setups I've seen to date.

Quote:

Originally Posted by JordoKAP

I think for $6k it could be done even with a profit margin!

I'll shoot high......
Turbo Charger - GT35R - $1500
Wastegate - $300
Blow off Valve - $300
Intercooler core - $500
Misc oil fittings/lines/air filter - $400

You would have $3000 to fab:
Up pipe (turbo manifold)
Downpipe
Intake pipe
Intercooler end tanks
Intercooler piping

I understand the first kit would simply cost more, due to needing more time to produce. If you were to make jigs and make a seemless process. A single turbo kit would be priced perfect at $6k right with the superchargers, rather then $7800-8k for a twin kit.

$3,000 for fab, that woud be great if we were welding air together

Quote:

Originally Posted by jran76

I don't think their reluctance to mass produce a kit has to do with profit margin. It sounds like they are not the type of company that wants to get involved in doing that kind of business for a product like this. They do custom work. If you want a mass produced kit, send these pics to a company that is in that line of business, and I am sure they will be willing to look into it if there is a market for it.

I'm not the kind of guy to sell the same thing to more than one person. I'll gladly build similar, but different, setups for the same platform. I'm not for mass producing them, especially for penny pinchers. You want my stuff, it's gonna cost what it's going to cost because it's something different than what everyone else has. My prices aren't cheap, they aren't what other kits cost, but they also aren't out in left field for the quality of the hardware. I've never had anyone that's seriously interested in a setup turn away because of price, however if you think it's going to happen for equal or less than an off the shelf, mass produced kit, you have the wrong idea

Quote:

Originally Posted by URNEXT!

Your craftsmanship is second to none. Its hard to find someone that does nice work like this. Too bad you don't have any interest in making a jig for the piping. I think you would do well if you turned this into a kit

Thank you, I put alot of effort into everything I build! My hardware is built to the best of my abilities and also as if I were building it for my own car, as I would expect it, with the highest of expectations. I don't let anything slide with my hardware, it's exactly how it should be and nothing less!

Quote:

Originally Posted by JB-370z

What I am wondering is, how even the air flow is going to be with one turbo to both throttle bodies?

I'm not designing this stuff in solidworks but I'm pretty damn good at fabbing this stuff how it should be regarding flow characteristics. The dual TB definitely tested my abilities but after seeing the charging piping done, intercooler to throttle bodies, I'm confident it will get the job done. If the tuner is able to tune accordingly with the dual blow through MAF's, then we are definitely set!

And with that, here's today's progress!

2.75" charge piping, 2.75" split to the passenger side TB, 2.5" to the drivers side TB. Passenger side has shorter route to take but also takes a tighter path to the TB. From the IC, the direct path is to the 2.5" drivers side piping. Not the most ideal piping split but the best possible solution for the room and hardware configuration

OEM fans relocated in front of the radiator, polarity switched, now pusher instead of puller

Manifold wrapped

Getting closer to having her feet back on the ground!

Roomates for the night

JB-370z · 05-04-2011, 10:06 PM

Looks amazing and I can't wait until the tuning starts!

esfourteen · 05-04-2011, 11:29 PM

awesome work! just curious, where do you plan on placing the MAF's?

HTA A4 · 05-04-2011, 11:32 PM

Very nice Shawn!

OP, build is awesome! Car is gonna be amazing to drive!!

Off-topic real quick: Another car Shawn has built. 1.8L bored to 1.9L, built bottom end, built top half ready for 8500rpm (6800rpm stock), cams. HTA3076r turbo, all custom plumbing, custom intake manifold, full custom downpipe and exhaust, custom methanol tank, etc.

Shawn knows what he's doing! He does this for a living...obviously doing something right. I live in Illinois and took my car all the way to Florida to have Shawn work his magic on it.

Plus the intake manifold he made.

Kastley85891 · 05-04-2011, 11:34 PM

Pity no blow through avaliable for Z's......... or speed density ;-)

RockStarKick · 05-04-2011, 11:37 PM

Damn, man taking it to the next level with this set-up and build... !!!!!

Mr.Squeeze · 05-04-2011, 11:58 PM

Quote:

Originally Posted by esfourteen

awesome work! just curious, where do you plan on placing the MAF's?

I was going to ask the same thing. Everything looks good so far cant wait for the results.

EXTREME · 05-05-2011, 12:06 AM

very nice work and the builder knows what he is doing. good job shawn

HKYStormFront · 05-05-2011, 12:10 AM

ryan, you still on track to have this thing out of the shop by next week?

Boost_lee · 05-05-2011, 12:29 AM

grade A stuff

Not only does it look great, but the progress is quite fast too!

docaam · 05-05-2011, 12:42 AM

great progress, cant wait for the finish

98intrigue · 05-05-2011, 01:15 PM

Thanks again, everyone! The anticipation is building!

Quote:

Originally Posted by HKYStormFront

ryan, you still on track to have this thing out of the shop by next week?

Yes sir, there's still a lot left to do...but it will be done. Since I am having it tuned locally, rather than 4hrs away like originally planned, it took A LOT of stress off of my/Shawn's shoulders. So even though it won't be tuned Saturday like originally planned, that's perfectly fine by me. Now Shawn has more time to complete everything and I have more time to get the appointment for the tune.

As Sean said, all the hot piping will be wrapped and I ordered a turbo blanket today. Also, thanks to Tony at Motordyne for 2nd daying my new hoses for the manifold!

Red__Zed · 05-05-2011, 02:00 PM

coming along nicely. excited to see what kind of numbers you put down.

05-04-2011, 09:37 PM	#92 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	1 turbo, 2 intake manifolds, will the pressure make it to both manifolds simultaneousnesly? if not does it make it hard to tune? Just wondering why more companies don't release a single turbo kit for around the same price point as a supercharger? What is the challenge with single turbo on a V6 dual inakes vs Twins? LOL sorry soo many questions but my knowledge is limited when it comes to this kind of setup. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

05-04-2011, 10:06 PM	#94 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Looks amazing and I can't wait until the tuning starts! __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

05-04-2011, 11:29 PM	#95 (permalink)
esfourteen A True Z Fanatic Join Date: Mar 2010 Location: LI, NY Posts: 1,375 Drives: 40th TT Rep Power: 18	awesome work! just curious, where do you plan on placing the MAF's? __________________ Build Thread \| GTM TT Install Thread \| Engine Build Thread

05-04-2011, 11:32 PM	#96 (permalink)
HTA A4 Base Member Join Date: May 2011 Location: Illinois Posts: 2 Drives: 2002 Audi A4 1.9L Rep Power: 14	Very nice Shawn! OP, build is awesome! Car is gonna be amazing to drive!! Off-topic real quick: Another car Shawn has built. 1.8L bored to 1.9L, built bottom end, built top half ready for 8500rpm (6800rpm stock), cams. HTA3076r turbo, all custom plumbing, custom intake manifold, full custom downpipe and exhaust, custom methanol tank, etc. Shawn knows what he's doing! He does this for a living...obviously doing something right. I live in Illinois and took my car all the way to Florida to have Shawn work his magic on it. Plus the intake manifold he made. __________________ Audi A4 1.9L HTA3076r Built by Shawn @ Speed Freak Fabrications

05-04-2011, 11:34 PM	#97 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Pity no blow through avaliable for Z's......... or speed density ;-) __________________ Boosted V8 hunter 2850 lbs and 375WHP

05-04-2011, 11:37 PM	#98 (permalink)
RockStarKick Enthusiast Member Join Date: Dec 2010 Location: Houston Posts: 298 Drives: it like a rental Rep Power: 15	Damn, man taking it to the next level with this set-up and build... !!!!! __________________ 2013 Mustang GT, 6M, Track Pack & Leather Recaros 2011 Pearl White 6M /Sport Pkg - SOLD

05-05-2011, 12:06 AM	#100 (permalink)
EXTREME Base Member Join Date: Apr 2010 Location: at Shop Posts: 19 Drives: 2010 370Z Rep Power: 15	very nice work and the builder knows what he is doing. good job shawn __________________ something is cookin

05-05-2011, 12:10 AM	#101 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	ryan, you still on track to have this thing out of the shop by next week? __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

05-05-2011, 12:29 AM	#102 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	grade A stuff Not only does it look great, but the progress is quite fast too!

05-05-2011, 12:42 AM	#103 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 29	great progress, cant wait for the finish __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

05-05-2011, 02:00 PM	#105 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	coming along nicely. excited to see what kind of numbers you put down.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS/FT: 300zx w/ Skyline GTR RB26 Single Turbo Swap 5 Speed	Z-Creations	Cars for sale (Private Classifieds)	0	01-23-2011 03:06 PM
First STS rear mount turbo 370Z???	atx370z	Nissan 370Z General Discussions	24	10-14-2010 03:53 PM
*370z needed: Single turbo kit development*	Chris@FsP	Texas	0	01-06-2010 03:05 PM
300ZX vs. Single Turbo Supras	Mercennarius	Other Vehicles	9	09-14-2009 09:59 PM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 05:03 PM