Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   New GTM stage 2 TT build (http://www.the370z.com/forced-induction/34033-new-gtm-stage-2-tt-build.html)

jnaut 05-13-2011 08:36 PM

ok, guys the base tune was installed to keep it safe to drive. There were zero issues with the install but the waste gates are allowing to much boost. Im going to pull them off tomorrow and check the spring pressures and re adjust them. it spiked to 11 psi for a split second then we shut it down. This is not a big ill have it squared away tomorrow then we will have the actual numbers, but it did make 300hp @ 4k rpm. ill have videos up tomorrow, the car sounds amazing. such a piece of art work . congrats billy :)

98intrigue 05-13-2011 08:40 PM

Quote:

Originally Posted by jnaut (Post 1109684)
ok, guys the base tune was installed to keep it safe to drive. There were zero issues with the install but the waste gates are allowing to much boost. Im going to pull them off tomorrow and check the spring pressures and re adjust them. it spiked to 11 psi for a split second then we shut it down. This is not a big ill have it squared away tomorrow then we will have the actual numbers, but it did make 300hp @ 5k rpm. ill have videos up tomorrow, the car sounds amazing. such a piece of art work . congrats billy :)

Small issue...can't wait to see what the final numbers are!

Ps I made 411hp @4700rpms before the MAF was maxed out:eek:

tranceformer 05-13-2011 08:41 PM

wow, its been a big week for turbo 370Z's!

congrats billy!

jnaut 05-13-2011 08:46 PM

Quote:

Originally Posted by 98intrigue (Post 1109688)
Small issue...can't wait to see what the final numbers are!

Ps I made 411hp @4700rpms before the MAF was maxed out:eek:

hummm... Mr. Ryan :icon23:

hahaha

jnaut 05-13-2011 08:47 PM

ryan , you are correct as it is a small issue as it runs and drive like stock .

KaienZ34 05-13-2011 10:14 PM

:excited::excited::excited::excited:

DIGItonium 05-14-2011 11:16 AM

How much boost are you guys planning to run? The shop working on my car is planning to set it to the absolute minimum (6.5 PSI?) with this kit. Since I won't be getting an EVC, I may make the best of this kit and at least switch out the stock cats for an F.I. HFC.

So I'm assuming this is going to be close to 450 whp on 91 octane?

BTW... how does the car cope with boost spike or creep as mentioned?

jnaut 05-14-2011 01:43 PM

All issues have been corrected, we are going back to the rollers in an hour or so. Right now its set at 6 psi, we will see how the tuning goes possible turn up the boost a little.

jnaut 05-14-2011 01:46 PM

Quote:

Originally Posted by DIGItonium (Post 1110408)
How much boost are you guys planning to run? The shop working on my car is planning to set it to the absolute minimum (6.5 PSI?) with this kit. Since I won't be getting an EVC, I may make the best of this kit and at least switch out the stock cats for an F.I. HFC.

So I'm assuming this is going to be close to 450 whp on 91 octane?

BTW... how does the car cope with boost spike or creep as mentioned?

Yes i would suggest a high flow cat or TP, we do have 93 octane here but we will not see 450 hp on this very low reading mustang dyno, atleast not at 6 psi. If you run a EBC your boost creep should not be an issue as spiking it will a little bit but settle back at the 6psi mark.

tranceformer 05-14-2011 01:57 PM

Maybe this one won't spin on the dyno like that last GTM TT 370Z!! :icon17:

DIGItonium 05-14-2011 01:58 PM

Quote:

Originally Posted by jnaut (Post 1110588)
Yes i would suggest a high flow cat or TP, we do have 93 octane here but we will not see 450 hp on this very low reading mustang dyno, atleast not at 6 psi. If you run a EBC your boost creep should not be an issue as spiking it will a little bit but settle back at the 6psi mark.

Oops! I was speaking with incorrect assumptions. I should've meant 100-150 whp gain at 6-6.5 PSI. Hopefully I can get away without an EBC to keep things simple for this daily driver... it's not driven very hard, but the extra pep is nice when getting on the freeway, brief passes, and going through an intersection (i.e., this car lacks a bit of low end grunt to move quickly off the line). :)

Some drive by vids please! I want to hear the sound. BTW... I may have missed it in this thread. What's the wastegate setup for this build? Just wondering if the OP will be able to hear the turbo spooling. It's hard to hear in some of the vids.

jnaut 05-14-2011 03:03 PM

He has internal waste gates, as for hearing the turbos no problem :)

jnaut 05-14-2011 03:03 PM

Quote:

Originally Posted by tranceformer (Post 1110607)
Maybe this one won't spin on the dyno like that last GTM TT 370Z!! :icon17:

yes, it spun the tires on the dyno this time also , hahaha

jnaut 05-14-2011 03:08 PM

ok, the results are in 441hp/332tq to the wheels @ 8.5 psi. Now remember this is on an extremely low reading mustang dyno. I feel its an honest assumption to say on a dynodynamic its output would be 470 to 480 hp to the wheel. Billy's cars in an animal, runs drives like stock until you get into the skinny pedal. :)

98intrigue 05-14-2011 04:02 PM

^Sickkkk!!!

kdo2milger 05-14-2011 05:01 PM

im officially jealous

Billy02987 05-14-2011 05:22 PM

The car feels like a whole new animal! Big thanks to J Spec and HPlogic for making it happen. Of course the weather got bad as soon as I got home so I only have videos of it on the dyno. I'll have a few more up soon. OP will be updated as well.

YouTube - Twin Turbo 370z

YouTube - Twin Turbo 370z

YouTube - Twin Turbo 370z

YouTube - Twin Turbo 370z

Billy02987 05-14-2011 05:44 PM

Quote:

Originally Posted by 98intrigue (Post 1110763)
^Sickkkk!!!

Ryan, I can't wait to see your car in person man!

jnaut 05-14-2011 05:47 PM

Quote:

Originally Posted by Billy02987 (Post 1111061)
Ryan, I can't wait to see your car in person man!

X2 as i can really appreciate quality work!

Billy02987 05-14-2011 06:59 PM

First page updated with videos on the dyno.

tranceformer 05-14-2011 07:04 PM

Now that that's done, what's next? New tires?

Dembflyr 05-14-2011 07:12 PM

Sweet!! Congrats!

I can't wait to get home and get mine done!

RCZ 05-14-2011 07:18 PM

Nice, I saw your car earlier in the week Billy, everything looked perfect! Congrats on the numbers. For comparison, I only made 400 there at 9psi.

KaienZ34 05-14-2011 07:41 PM

http://www.youtube.com/watch?v=mXW-hI6wqTI

http://www.youtube.com/watch?v=gcUHS9kQADU

http://www.youtube.com/watch?v=TNYa8HJ7NR4

http://www.youtube.com/watch?v=J8mh66mjHBI

Billy02987 05-14-2011 07:49 PM

^^ Thanks again KaienZ34, I don't know why it doesn't work for me.


Quote:

Originally Posted by tranceformer (Post 1111174)
Now that that's done, what's next? New tires?

I've been waiting on a set of Venaci's from VIP. Not sure when their getting here I guess as I can't seem to get conformiation from them. So once those get here I will be going up to a 305/30/19 in the back and 255/35/19 in the front. Well I wait for those I'm going to try and get a boost controller and I kind of want to go for the camp 2 as well lol.

KaienZ34 05-14-2011 08:02 PM

HKS camp II :yum:

jnaut 05-14-2011 08:17 PM

Quote:

Originally Posted by tranceformer (Post 1111174)
Now that that's done, what's next? New tires?

Did somebody say re-11"s ???

jnaut 05-14-2011 08:19 PM

Quote:

Originally Posted by KaienZ34 (Post 1111226)
HKS camp II :yum:

That is a BIG X2

nomnomnom

theDreamer 05-14-2011 08:29 PM

Love the Camp 2. :yum:

JB-370z 05-15-2011 03:31 PM

I love the flames that come out the tails at high rpm shifts! nice.

KaienZ34 05-15-2011 04:33 PM

My old SC vette did that also, it's always damn cool.

jnaut 05-15-2011 06:14 PM

Quote:

Originally Posted by JB-370z (Post 1112396)
I love the flames that come out the tails at high rpm shifts! nice.

Yea I liked it also!! :tup:

HP Logic 05-16-2011 12:03 PM

Car ran like a champ!....tuned out perfect with Osiris(as usual)...these cars are amazing when done right...enjoy Billy!!

KaienZ34 05-16-2011 12:09 PM

Osiris and uprev. Samething or no?

98intrigue 05-16-2011 01:00 PM

Quote:

Originally Posted by KaienZ34 (Post 1114046)
Osiris and uprev. Samething or no?

Yes. It's the Osiris UpRev.

HP Logic 05-16-2011 01:31 PM

UPREV is the company....Osiris is their tuning tool.

98intrigue 05-16-2011 01:48 PM

^ what he said. I'm an idiot.

KaienZ34 05-16-2011 04:00 PM

Quote:

Originally Posted by HP Logic (Post 1114228)
UPREV is the company....Osiris is their tuning tool.


Thank you my good man.:tiphat:

Billy02987 05-17-2011 08:05 PM

Quote:

Originally Posted by HP Logic (Post 1114032)
Car ran like a champ!....tuned out perfect with Osiris(as usual)...these cars are amazing when done right...enjoy Billy!!

Thanks Jack! The car drives like a beast!

Billy02987 05-21-2011 02:23 PM

Heading to the track tonight! Hopefully We get some good numbers!


All times are GMT -5. The time now is 05:03 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2