GTM Supercharger Stage 1 w/ F.I. LTH

tomnavone · 05-12-2011, 02:25 PM

Quote:

Originally Posted by weiboy718

Hey troll! Aren't you on vacation? Get off the forums and enjoy it LOL

Ok off to snorkel.

NewYorkJon34 · 05-12-2011, 02:34 PM

Well someone unnamed neg rep'd me saying I don't help this community. I can call bs on that one as I more then help this community in more ways then one. It's really people like that, that ruin great forums like this one. Let the 350z trolls stay on my350z and continue to ruin their own forum.

Lug · 05-12-2011, 02:38 PM

Quote:

Originally Posted by NewYorkJon34

Well someone unnamed neg rep'd me saying I don't help this community. I can call bs on that one as I more then help this community in more ways then one. It's really people like that, that ruin great forums like this one. Let the 350z trolls stay on my350z and continue to ruin their own forum.

+ green pip.

NewYorkJon34 · 05-12-2011, 02:48 PM

You guys are great lol, I wish I knew who just repped me so I could return the love, no homo

Mkai0 · 09-16-2011, 12:06 AM

The Dreamer,

What intake piece did you add to help you make that extra power?

theDreamer · 09-16-2011, 08:18 AM

Quote:

Originally Posted by Mkai0

The Dreamer,

What intake piece did you add to help you make that extra power?

No extra piece, all pieces supplied by GTM.

Glokwork · 09-25-2011, 09:56 PM

Those are great numbers Dreamer +1 to you, I'm thinking of going this same route with the stillen and the LTHS. Is there anything I need to know before hand or would I be better off with the HFCs?

NYBladeZ · 09-29-2011, 07:57 PM

Interested to see how your number go with the Stillen Kit and LTH's. No one has stepped up to try a stage 2 GTM SC with LTH's and we haven't heard anything on VVEL being cracked anytime soon.

glory · 03-06-2012, 08:25 PM

Sorry to be reviving this old thread but I came across is it and I think I am missing something here.

My dilemma is here is why Dreamer is making less power with LTH's. I understand boost = back pressure so freeing up the exhaust (CBE +LTH) will lower the back pressure (and therefore the boost) and make it more efficient, but shouldn't he be making more power @8psi rather than less?

Quote:

Originally Posted by F.I. Inc.

...
Boost is back pressure. The stock exhaust is as restrictive as it gets. When you relieve back pressure in a force inducted application, you have a PSI drop off but you pick up torque and power.

Now it seems like this SC is capped @ 8 PSI. What that tells me is that no matter what you do to it, it cannot move enough volume to move more air than 8 PSI.
...

Now is it because the SC is capped @ 8psi that it can't achieve higher numbers or is it some VVEL thing holding it back?

Sorry, not trying to stir the pot just trying to wrap my head around this.

Thanks

Mike@GTM · 03-06-2012, 09:00 PM

Quote:

Originally Posted by glory

Sorry to be reviving this old thread but I came across is it and I think I am missing something here.

My dilemma is here is why Dreamer is making less power with LTH's. I understand boost = back pressure so freeing up the exhaust (CBE +LTH) will lower the back pressure (and therefore the boost) and make it more efficient, but shouldn't he be making more power @8psi rather than less?

Now is it because the SC is capped @ 8psi that it can't achieve higher numbers or is it some VVEL thing holding it back?

Sorry, not trying to stir the pot just trying to wrap my head around this.

Thanks

The Supercharger Unit itself is not capped at 8psi...our Stage 1.5 Supercharger Kit proves that.

The Stage 1 Supercharger as it was originally designed, needs a little bit of back-pressure from the exhaust to keep the compressor in its efficiency range. Once the exhaust back pressure is reduced too much, the compressor loses efficiency and therefore, makes less power.

If you are looking for more power than the Stage 1, but still want good mid-range torque, then check out the Stage 1.5: GTM Performance Engineering: Stage 1 Supercharger Upgrade Kit 500whp capable

glory · 03-06-2012, 09:07 PM

Ah ok thanks Mike, forgot about the efficiency range. Makes sense now.

Thanks again

F.I. Inc. · 03-07-2012, 10:45 AM

Quote:

Originally Posted by glory

Sorry to be reviving this old thread but I came across is it and I think I am missing something here.

My dilemma is here is why Dreamer is making less power with LTH's. I understand boost = back pressure so freeing up the exhaust (CBE +LTH) will lower the back pressure (and therefore the boost) and make it more efficient, but shouldn't he be making more power @8psi rather than less?

Now is it because the SC is capped @ 8psi that it can't achieve higher numbers or is it some VVEL thing holding it back?

Sorry, not trying to stir the pot just trying to wrap my head around this.

Thanks

Mike@GTM answered this well!

There is nothing wrong with our headers or exhaust. In an N/A application they have big gains across the board...

I do not want to stir the pot as well but the stage I kit is inefficient! I am glad to see GTM finally is making a bigger more efficient kit that can support less back pressure.

I do not think that our headers will fit with the stage 1.5 kit though. I have not seen the kit first hand but I have been told that with the new design, there is no room for our headers!

Thanks, Tony

Mike@GTM · 03-07-2012, 06:01 PM

Quote:

Originally Posted by F.I. Inc.

Mike@GTM answered this well!

There is nothing wrong with our headers or exhaust. In an N/A application they have big gains across the board...

I do not want to stir the pot as well but the stage I kit is inefficient! I am glad to see GTM finally is making a bigger more efficient kit that can support less back pressure.

I do not think that our headers will fit with the stage 1.5 kit though. I have not seen the kit first hand but I have been told that with the new design, there is no room for our headers!

Thanks, Tony

Mmmm...I wouldn't call the Stage 1 "inefficient". See, there's always a trade off, as you should know. Bigger is not always better.

In fact, there are a lot of subtleties involved with designing a forced induction system. It's not as simple as just tossing a turbo or supercharger on a motor and getting good results. There is an thread on here that exemplifies what can happen with that mentality.

The Stage 1 kit (much like a small turbo), has superb mid-range torque for a centrifugal supercharger. The Stage 1.5 (like a mid sized turbo), gets to full song a little later than the Stage 1, but still quicker than Stage 2 (like a large turbo).

Each one of our stages has its place depending on what the end user is doing with their car. No one stage is going to be the best for every circumstance. Flatly calling our Stage 1 inefficient just illustrates that not everyone fully understands how forced induction really works.

One_Quick_Z · 03-07-2012, 06:48 PM

But the question still remains with the stage 1.5 or 2 work with the LTH's?!?!?!?

DAN

Nixlimited · 03-07-2012, 06:55 PM

Quote:

Originally Posted by Mike@GTM

Mmmm...I wouldn't call the Stage 1 "inefficient". See, there's always a trade off, as you should know. Bigger is not always better.

In fact, there are a lot of subtleties involved with designing a forced induction system. It's not as simple as just tossing a turbo or supercharger on a motor and getting good results. There is an thread on here that exemplifies what can happen with that mentality.

The Stage 1 kit (much like a small turbo), has superb mid-range torque for a centrifugal supercharger. The Stage 1.5 (like a mid sized turbo), gets to full song a little later than the Stage 1, but still quicker than Stage 2 (like a large turbo).

Each one of our stages has its place depending on what the end user is doing with their car. No one stage is going to be the best for every circumstance. Flatly calling our Stage 1 inefficient just illustrates that not everyone fully understands how forced induction really works.

If it's the same compressor wheel with a different, more efficient, housing on the stage 1.5, why is it taking longer to come online?

09-25-2011, 09:56 PM	#97 (permalink)
Glokwork A True Z Fanatic Join Date: Jun 2011 Location: Roanoke, VA Posts: 2,657 Drives: 11 370Z MB 6MT Rep Power: 22	Those are great numbers Dreamer +1 to you, I'm thinking of going this same route with the stillen and the LTHS. Is there anything I need to know before hand or would I be better off with the HFCs? __________________ Precision Turbo Tial Turbosmart Fast Intentions Seibon Prosport Advan AD08R HKS Hipermax IV Nismo Evo-R PW:JDM UpRev Pioneer Escort Volk CE28N Top Mount Single Turbo 551whp/482wtq@10psi

09-29-2011, 07:57 PM	#98 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 20	Interested to see how your number go with the Stillen Kit and LTH's. No one has stepped up to try a stage 2 GTM SC with LTH's and we haven't heard anything on VVEL being cracked anytime soon. __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

03-07-2012, 06:48 PM	#104 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	But the question still remains with the stage 1.5 or 2 work with the LTH's?!?!?!? DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.	SAM@GTM	Forced Induction	311	09-07-2011 04:42 AM
The Specialty-Z GTM Stage 2 Build	Seb@SZ	Forced Induction	62	12-12-2010 11:34 AM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.	SAM@GTM	Forced Induction	254	08-11-2010 11:59 AM
RGM Stage 1 (Need Some Help)	alexpila	Tuning	1	02-01-2010 12:09 PM

05-12-2011, 02:34 PM	#92 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	Well someone unnamed neg rep'd me saying I don't help this community. I can call bs on that one as I more then help this community in more ways then one. It's really people like that, that ruin great forums like this one. Let the 350z trolls stay on my350z and continue to ruin their own forum.

05-12-2011, 02:48 PM	#94 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1065	You guys are great lol, I wish I knew who just repped me so I could return the love, no homo

09-16-2011, 12:06 AM	#95 (permalink)
Mkai0 Base Member Join Date: Dec 2010 Location: Somewhere in Texas Posts: 209 Drives: 2008 G35 Sedan Rep Power: 14	The Dreamer, What intake piece did you add to help you make that extra power?

03-06-2012, 09:07 PM	#101 (permalink)
glory Base Member Join Date: Mar 2012 Location: Saskatchewan Posts: 4 Drives: 04 ZX3 (For now) Rep Power: 13	Ah ok thanks Mike, forgot about the efficiency range. Makes sense now. Thanks again