Rear mounted turbo kit

Brazilbro · 04-09-2009, 01:04 PM

crash just a little of topic but have u met lela star?

nogoodname · 04-09-2009, 02:24 PM

^ yea. A bit off topic.

Potholes over here would wreck the turbos in the rears.

Crash · 04-09-2009, 08:40 PM

HAHA. Never too far off topic to talk about porn.

But, no I haven't met her. Sorry.

Nogood, that's what I'd be afraid of too! **BUMP BUMP** "Boost = -1psi"

bigcloud · 04-12-2009, 04:21 PM

Quote:

Originally Posted by nogoodname007

^ yea. A bit off topic.

Potholes over here would wreck the turbos in the rears.

What logic are you using to come up with this statement? It's not like the turbo is hanging 2 inches from the ground. It's actually up there quite a ways.

Crash · 04-13-2009, 07:34 PM

They're not hanging lower than the muffler would, but just imagine that the hanger breaks when you hit a hard pot hole and the turbo smacks the edge of the pothole... I'm not saying that it's likely that this would happen, but it's still a thought.

I've seen some cool rear mount installs, though, that built the turbo into the muffler (to hide them for the most part) and fit just fine.

Boost_lee · 05-05-2009, 08:25 PM

lol i like the single turbine exhaust tip, along with the EWG dump out the other exhaust pipe

2bits · 05-06-2009, 05:49 PM

In before someone asks "Can I pass emissions testing with this setup?"

On a more serious note, this has got to be hell for ANY kind of cat. They run hot to begin with, but this... I imagine you'd have to run without a cat.

Zguy · 06-06-2009, 07:07 PM

You probably wont pass emissions with any turbo system.... and no I wouldnt run a cat with a rear mount system. A friend of mine has one on his 350 that we put together for about 3k. He has been running the piss out of it for about a year now with no probs. He has the VQ35DE and hit 390whp on 8psi.
He doesnt drive in the rain so no worry about water, and his filter gets just as dirty as before with it in the front. Plus he doesnt have to worry about moving power steering lines or frying anything that might be in the general vacinity of the turbo..... Oh and he is at full boost around 3200......

terrycs · 06-07-2009, 12:09 PM

The STS system is actually designed to be installed cat back. STS actually has the best chance of getting CARB certification and have already done so on several of their kits. I didn't go with STS because they have not done an HR/VHR motor yet.

For those thinking about being the first, here is a C&P from an email I got from them:

Hi Terry, Here is some Video of some of the 350-Z's and G-35's that we have out there..... Enjoy and let me know if you have any questions!!! Thanks,

1.) dead link

2.) http://www.ststurbo.com/sts_video

3.) YouTube - STS PROMO

4.) http://videos.streetfire.net/search/...4e012b0039.htm

5.) YouTube - g35nyc.com g35 coupe trubo leavein

6.) YouTube - Daniel's STS Rear Mount Turbo 350z

jmlenz · 06-10-2009, 06:23 PM

Hell, I say they make a 370 kit! The more FI options we have for the Z the better!

CBRich · 06-10-2009, 09:05 PM

This may not be the ideal solution for FI but could be a nice cheap and easy way to get big power.

Zguy · 06-13-2009, 12:42 PM

Well the problem for STS is that anyone who has half a brain and know about FI can fab their own kit up for WAY cheaper than what they are charging and with alot better quality. I have only seen 1 kit that came directly from them and I could have probably put something better together from a junk yard. The ONLY thing that STS has done right is the oiling system for the turbo but if you are mechanically inclined you can find a way to get oil to the turbo in the back of the car.....

kannibul · 06-14-2009, 10:42 AM

Quote:

Originally Posted by 2fast4thelaw

Can you say Turbo Lag?? With that long of piping it would take for ever for that turbo to spool!

There is a specific reason why everyone mounts turbos right off the exhaust manifold/headers.

Proximity to lubricating oil, more than likely is the main reason.

One_Quick_Z · 06-14-2009, 10:44 AM

There is a guy on ChicagoZ my club forum that has it I have yet to hear it in person but he loves it again it wouldnt be my first choice though

DAN

kannibul · 06-14-2009, 01:02 PM

The thing that gets me is that people are strapping on a turbo (or any other forced induction) to an engine that has 11:1 compression. That's just asking for it to blow up...

I remember the rule of thumb is 8:1 for blowers. I can't imagine he amount of octane boost one would need to run for 11:1 to prevent detonation / pre-ignition, if it'd even run correctly on 91...(since the car already takes 91...)

I dunno, I guess I'm not THAT into power. This car will break loose with an automatic transmission up into 3rd gear...that's plenty of power. After that, it's a matter of getting it to the pavement and stay there...

04-09-2009, 08:40 PM	#18 (permalink)
Crash A True Z Fanatic Join Date: Dec 2008 Location: Los Angeles Posts: 1,853 Drives: 02 Corvette Z06 Rep Power: 589	HAHA. Never too far off topic to talk about porn. But, no I haven't met her. Sorry. Nogood, that's what I'd be afraid of too! BUMP BUMP "Boost = -1psi" __________________ 2002 Corvette Z06 - Totaled 2003 Corvette Z06 50th Anniversary

04-13-2009, 07:34 PM	#20 (permalink)
Crash A True Z Fanatic Join Date: Dec 2008 Location: Los Angeles Posts: 1,853 Drives: 02 Corvette Z06 Rep Power: 589	They're not hanging lower than the muffler would, but just imagine that the hanger breaks when you hit a hard pot hole and the turbo smacks the edge of the pothole... I'm not saying that it's likely that this would happen, but it's still a thought. I've seen some cool rear mount installs, though, that built the turbo into the muffler (to hide them for the most part) and fit just fine. __________________ 2002 Corvette Z06 - Totaled 2003 Corvette Z06 50th Anniversary

06-07-2009, 12:09 PM	#24 (permalink)
terrycs Base Member Join Date: Dec 2008 Location: La Palma, CA Posts: 123 Drives: 07 G35S Sedan Rep Power: 255	The STS system is actually designed to be installed cat back. STS actually has the best chance of getting CARB certification and have already done so on several of their kits. I didn't go with STS because they have not done an HR/VHR motor yet. For those thinking about being the first, here is a C&P from an email I got from them: Hi Terry, Here is some Video of some of the 350-Z's and G-35's that we have out there..... Enjoy and let me know if you have any questions!!! Thanks, 1.) dead link 2.) http://www.ststurbo.com/sts_video 3.) YouTube - STS PROMO 4.) http://videos.streetfire.net/search/...4e012b0039.htm 5.) YouTube - g35nyc.com g35 coupe trubo leavein 6.) YouTube - Daniel's STS Rear Mount Turbo 350z Last edited by terrycs; 06-07-2009 at 12:11 PM.

06-14-2009, 10:44 AM	#29 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	There is a guy on ChicagoZ my club forum that has it I have yet to hear it in person but he loves it again it wouldnt be my first choice though DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can you get to 400 without turbo or super-charger	Q_USAF	Engine & Drivetrain	193	03-15-2023 03:18 PM
AAM VQ37 Twin Turbo Kit!	Clint@Altered	Forced Induction	114	12-01-2009 09:58 PM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 05:03 PM
APS Twin turbo release???	Dcwatson7	Forced Induction	8	03-06-2009 01:13 AM
BMW M3 E46 Turbo vs Lamborghini Gallardo	AK370Z	Other Vehicles	7	12-27-2008 02:22 PM

04-09-2009, 01:04 PM	#16 (permalink)
Brazilbro A True Z Fanatic Join Date: Mar 2009 Location: Indianapolis, IN Posts: 1,131 Drives: Juke/240Z Rep Power: 848	crash just a little of topic but have u met lela star?

04-09-2009, 02:24 PM	#17 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	^ yea. A bit off topic. Potholes over here would wreck the turbos in the rears.

05-05-2009, 08:25 PM	#21 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	lol i like the single turbine exhaust tip, along with the EWG dump out the other exhaust pipe

05-06-2009, 05:49 PM	#22 (permalink)
2bits Base Member Join Date: Mar 2009 Location: Seattle Posts: 118 Drives: 09 370Z Blk Sp 7AT Rep Power: 16	In before someone asks "Can I pass emissions testing with this setup?" On a more serious note, this has got to be hell for ANY kind of cat. They run hot to begin with, but this... I imagine you'd have to run without a cat.

06-06-2009, 07:07 PM	#23 (permalink)
Zguy Base Member Join Date: Nov 2008 Location: Fort Worth Posts: 153 Drives: 05 Chrome Silver Rep Power: 16	You probably wont pass emissions with any turbo system.... and no I wouldnt run a cat with a rear mount system. A friend of mine has one on his 350 that we put together for about 3k. He has been running the piss out of it for about a year now with no probs. He has the VQ35DE and hit 390whp on 8psi. He doesnt drive in the rain so no worry about water, and his filter gets just as dirty as before with it in the front. Plus he doesnt have to worry about moving power steering lines or frying anything that might be in the general vacinity of the turbo..... Oh and he is at full boost around 3200......

06-10-2009, 06:23 PM	#25 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 643	Hell, I say they make a 370 kit! The more FI options we have for the Z the better!

06-10-2009, 09:05 PM	#26 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	This may not be the ideal solution for FI but could be a nice cheap and easy way to get big power.

06-13-2009, 12:42 PM	#27 (permalink)
Zguy Base Member Join Date: Nov 2008 Location: Fort Worth Posts: 153 Drives: 05 Chrome Silver Rep Power: 16	Well the problem for STS is that anyone who has half a brain and know about FI can fab their own kit up for WAY cheaper than what they are charging and with alot better quality. I have only seen 1 kit that came directly from them and I could have probably put something better together from a junk yard. The ONLY thing that STS has done right is the oiling system for the turbo but if you are mechanically inclined you can find a way to get oil to the turbo in the back of the car.....

06-14-2009, 01:02 PM	#30 (permalink)
kannibul A True Z Fanatic Join Date: Jun 2009 Location: Jenks, OK Posts: 2,281 Drives: 370z Touring/Sport Rep Power: 267	The thing that gets me is that people are strapping on a turbo (or any other forced induction) to an engine that has 11:1 compression. That's just asking for it to blow up... I remember the rule of thumb is 8:1 for blowers. I can't imagine he amount of octane boost one would need to run for 11:1 to prevent detonation / pre-ignition, if it'd even run correctly on 91...(since the car already takes 91...) I dunno, I guess I'm not THAT into power. This car will break loose with an automatic transmission up into 3rd gear...that's plenty of power. After that, it's a matter of getting it to the pavement and stay there...