Gtm 370z twin turbo transformation 548rwhp 486rwtq @ 11 psi

kkruel55

Also thinking about it might be good to learn the new clutch before adding all that power... so I don't pull a Brad coming out of Baker.

__________________
2010 Magnetic Black Coupe 6 speed-- Powerhouse Amuse//AP Racing//Volk Racing//Stillen//Tein//SPC//Hotchkis//INGS+1//MRWorks//Fast Intentions

JB-370z

I think this is a smart idea for sure. The only thing is I am stuck on trying to find a 3" exhaust that works for me. There are not many options when it comes to turbo exhausts for the 370z. Im thinking of asking a company to make me one just not sure who yet, maybe Amuse. Whats your idea for a 3" exhaust?

Also besides a new clutch I would try to ready some 3" down pipes with external waste gates (not BOV's on them lol). Also HKS EVC boost controller and if you really want to be ready grab a HKS camp2 and HKS AFK unit to read knock and AIR/FUEL ratios. Now you really see Im a HKS whore

The external waste gates really helps out if you are installing a boost controller. It gives more consistency when modulating boost then internal waste gates and they sound really cool too

Yeah that would not be good lol. So sad to see a real JDM s14 total a rim and strut arms . I am thinking about the OS clutch as well but all so considering the exeddy clutch too. Wish someone could tell me the pros and cons of both. I dont really want a leg work out every time I drive my car either.

__________________
ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll
GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

kkruel55

See the stock clutch is pretty soft in my opinion... I definitely enjoy the feel and consistency of a performance clutch. Not really sure on exhaust, I kinda want a GTM or a fab titanium but that could get pricey!

I was thinking about that HKS boost controller -- how exactly is the knob set up? can you adjust your low and high points? If I want to run, say, 4-5 psi for a mild boost on a track day will I be able to dial it that far back? Then 10 for cruising the streets :-D I guess it also depends on turbo selection fast/big spool. This is why I want to get on land and talk with Sam!

__________________
2010 Magnetic Black Coupe 6 speed-- Powerhouse Amuse//AP Racing//Volk Racing//Stillen//Tein//SPC//Hotchkis//INGS+1//MRWorks//Fast Intentions

car8oy281

This is sick-can't wait to get a turbo setup..

DIGItonium

Talk to GTM or Fast Intentions. IIRC, F.I. fabbed a custom 3" design for Seb@SZ.

There are a few boosted owners with the HKS EVC 6. I'm taking the same route as well (minimum boost at low setting, and roughly 8 PSI for the high setting). Mine is daily driven, so it is going to be a conservative setup. In other words, whatever the 305s can handle

__________________

kkruel55

When are you getting boosted? are you doing it yourself? PM me so we dont pwn Sam's thread here

__________________
2010 Magnetic Black Coupe 6 speed-- Powerhouse Amuse//AP Racing//Volk Racing//Stillen//Tein//SPC//Hotchkis//INGS+1//MRWorks//Fast Intentions

JB-370z

You can only turn the boost controller down as far as the stock boost spring pressure is. So if its a 6.5psi spring like mine, you can only go down to 6.5, no lower.

-- As for the HKS EVC 6. I own one, but I have been waiting on my 3" down pipes with external waste gates and BOV relocation pipes from Sam before I install the boost controller.

__________________
ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll
GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

kkruel55

Sheesh so I have to start at the power level of your car... Ok def. getting the clutch first to practice on lol

__________________
2010 Magnetic Black Coupe 6 speed-- Powerhouse Amuse//AP Racing//Volk Racing//Stillen//Tein//SPC//Hotchkis//INGS+1//MRWorks//Fast Intentions