7 speed good it just can not believe this.

tkfracing · 12-07-2010, 05:19 AM

I believe many members of this website. The model gear automatic start and adjust the strength increase I myself, after I adjust the strength to give up. And the strength level is satisfied next five forces that Power 441HP @ 7526rpm Torque 423Nm @ 6436rpm, and it can not do it anymore because of gear. There are no parts that I used to add architectural equation. Not even standards of service parts. I believe many people are concerned at this point. And I wanted to give everyone on the Web and a knowledge of this Help find a solution before all the people think offline.

gaveup · 12-07-2010, 05:48 AM

what in the hell did you just say?

ThoriumHotdog · 12-07-2010, 05:10 PM

Quote:

Originally Posted by gaveup

what in the hell did you just say?

He said he has an awesome car (with problems but more awesome than most) and that he's from Bangkok.

shumby · 12-07-2010, 05:58 AM

f you had a littel bit of tact you would realize that he is from Bangkok and english is not his first language. Even I can understand that he is having issues with the power of the kit and the 7AT not handeling it. Sounds like he has a few gears slipping. I have this same issue with mine. Seems like he is being a good form member and trying the best he can to get his message out theree to help others out. Next time try to help instead of being a bit of a dink.

OP. All i can tell you is i took 5th 6th and 7th gears out of my transmission. They are all slipping. My failed 7AT transmission is on its way down to Sam at GTM to get looked at and rebuilt. Only after that will Sam know more. This will take time i know but until then we will just have to wait.

You could try looking into level 10 and what they can offer you. But I had contacted them and they lied to me saying they have already built 30-50 of the 7AT transmiossion. There is no way in hell this is true as this transmissioin is to new. So becareful if you talk to them.

Hi-Step'n370Z · 12-07-2010, 06:58 AM

Quote:

Originally Posted by shumby

f you had a littel bit of tact you would realize that he is from Bangkok and english is not his first language. Even I can understand that he is having issues with the power of the kit and the 7AT not handeling it. Sounds like he has a few gears slipping. I have this same issue with mine. Seems like he is being a good form member and trying the best he can to get his message out theree to help others out. Next time try to help instead of being a bit of a dink.

OP. All i can tell you is i took 5th 6th and 7th gears out of my transmission. They are all slipping. My failed 7AT transmission is on its way down to Sam at GTM to get looked at and rebuilt. Only after that will Sam know more. This will take time i know but until then we will just have to wait.

You could try looking into level 10 and what they can offer you. But I had contacted them and they lied to me saying they have already built 30-50 of the 7AT transmiossion. There is no way in hell this is true as this transmissioin is to new. So becareful if you talk to them.

There may have been some posts regarding this problem, but this is the first I've heard of any problems with the 7AT. Have there been many 7AT problems with the stock set up, or is the addition of the power kit the culprit?
,
,

tkfracing · 12-07-2010, 06:19 AM

Excuse me, is that you understand. English, I would not be good enough. I will try to write better. But I believe that you will probably know what the problem is. And I want everyone to tune the car is to have more horsepower. You guys will see the problems ahead. We may find a solution before

shumby · 12-07-2010, 07:07 AM

no issues with the stock set up i have headrd of. Mine was a direct relation to the SC and the TQ. So far i got 70000 km on my 09 FX50S with the same trans with no issues.

Fezzik · 12-07-2010, 07:25 AM

From what I read did he actually adjust his hp and torque to the point where it was slipping. If so this is invaluable information.

tkfracing · 12-07-2010, 07:50 AM

The sharing of information resulting from the use. In order to update and correct such defects. Would regularly throw switches with everyone in this website.

weiboy718 · 12-07-2010, 08:05 AM

At least he's making very close to The advertised numbers.

Op, what other mods do you have on the car?

Z eliminator · 12-07-2010, 08:48 AM

Acording to my Nissan dealership the 7 At has no servisable parts. The tranny fluid is long lasting and does not require changing for an extented period of time.
I spoke to Sam at GTM and there will be parts coming soon.
My stage 2 GTM SC will need some upgrades.

Z

shumby · 12-07-2010, 08:49 AM

elim I would not bet on too soon. VB yes but trans build might take a good while

Z eliminator · 12-07-2010, 11:08 AM

Il be happy with the VB and the Converter.
My best guess on the Tranney would be late 2011.
Im also going to tune it with the uprev.

" im happy for you that you got your SC before mine "
my tranny still shift great with 320 rwhp.

you got the first SC and the first blowen 7 AT.

RCZ must be dissapionted as no stillen SC has yet toasted a 7 AT.
Must be a bad tune or they have no power at all.

RCZ · 12-08-2010, 08:33 AM

Quote:

Originally Posted by Z eliminator

RCZ must be dissapionted as no stillen SC has yet toasted a 7 AT.
Must be a bad tune or they have no power at all.

I dont think this could be more pathetic if you tried. Its just SAD that I come up in random unrelated threads where I haven't even posted. Simply Pathetic.

christian370z · 12-07-2010, 12:34 PM

Those are some nice power numbers! You can find someone who can work on the computer controlling the transmission to adjust the shift logic a bit but the only real fix will be valve body upgrades and maybe internals which is in the works.

Your car looks so righteous with BBS LMs paired with the Amuse kit.

12-07-2010, 05:58 AM	#4 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 45 Posts: 6,288 Drives: your sister Rep Power: 237	f you had a littel bit of tact you would realize that he is from Bangkok and english is not his first language. Even I can understand that he is having issues with the power of the kit and the 7AT not handeling it. Sounds like he has a few gears slipping. I have this same issue with mine. Seems like he is being a good form member and trying the best he can to get his message out theree to help others out. Next time try to help instead of being a bit of a dink. OP. All i can tell you is i took 5th 6th and 7th gears out of my transmission. They are all slipping. My failed 7AT transmission is on its way down to Sam at GTM to get looked at and rebuilt. Only after that will Sam know more. This will take time i know but until then we will just have to wait. You could try looking into level 10 and what they can offer you. But I had contacted them and they lied to me saying they have already built 30-50 of the 7AT transmiossion. There is no way in hell this is true as this transmissioin is to new. So becareful if you talk to them. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

12-07-2010, 06:19 AM	#6 (permalink)
tkfracing Base Member Join Date: Aug 2010 Location: Bangkok Posts: 25 Drives: 09 nissan 370z white Rep Power: 15 $tkfracing is on a distinguished road$	Excuse me, is that you understand. English, I would not be good enough. I will try to write better. But I believe that you will probably know what the problem is. And I want everyone to tune the car is to have more horsepower. You guys will see the problems ahead. We may find a solution before
$tkfracing is offline$

12-07-2010, 07:07 AM	#7 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 45 Posts: 6,288 Drives: your sister Rep Power: 237	no issues with the stock set up i have headrd of. Mine was a direct relation to the SC and the TQ. So far i got 70000 km on my 09 FX50S with the same trans with no issues. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

12-07-2010, 07:50 AM	#9 (permalink)
tkfracing Base Member Join Date: Aug 2010 Location: Bangkok Posts: 25 Drives: 09 nissan 370z white Rep Power: 15 $tkfracing is on a distinguished road$	The sharing of information resulting from the use. In order to update and correct such defects. Would regularly throw switches with everyone in this website.
$tkfracing is offline$

12-07-2010, 08:48 AM	#11 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Acording to my Nissan dealership the 7 At has no servisable parts. The tranny fluid is long lasting and does not require changing for an extented period of time. I spoke to Sam at GTM and there will be parts coming soon. My stage 2 GTM SC will need some upgrades. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

12-07-2010, 05:48 AM	#2 (permalink)
gaveup Enthusiast Member Join Date: Aug 2010 Location: Tamarac FL Posts: 324 Drives: 10 Nissan 370Z MB M6 Rep Power: 181	what in the hell did you just say?

12-07-2010, 07:25 AM	#8 (permalink)
Fezzik Base Member Join Date: Jun 2010 Location: Chicago Posts: 182 Drives: G37 Vert 6mt White Rep Power: 15	From what I read did he actually adjust his hp and torque to the point where it was slipping. If so this is invaluable information.

12-07-2010, 08:05 AM	#10 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 16	At least he's making very close to The advertised numbers. Op, what other mods do you have on the car?

12-07-2010, 08:49 AM	#12 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 45 Posts: 6,288 Drives: your sister Rep Power: 237	elim I would not bet on too soon. VB yes but trans build might take a good while __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

12-07-2010, 11:08 AM	#13 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Il be happy with the VB and the Converter. My best guess on the Tranney would be late 2011. Im also going to tune it with the uprev. " im happy for you that you got your SC before mine " my tranny still shift great with 320 rwhp. you got the first SC and the first blowen 7 AT. RCZ must be dissapionted as no stillen SC has yet toasted a 7 AT. Must be a bad tune or they have no power at all. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

12-07-2010, 12:34 PM	#15 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 432	Those are some nice power numbers! You can find someone who can work on the computer controlling the transmission to adjust the shift logic a bit but the only real fix will be valve body upgrades and maybe internals which is in the works. Your car looks so righteous with BBS LMs paired with the Amuse kit. __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Theoretical top speed	grimm1	Engine & Drivetrain	26	02-16-2015 04:33 PM
Top Speed Y-Pipe	ddvette9	Intake/Exhaust	10	10-29-2010 03:44 PM
K1 speed	ilive2win	Track / Autocross / Drifting / Dragstrip	26	06-26-2010 08:26 AM
Top Speed	bigaudiofanat	Nissan 370Z General Discussions	93	06-18-2010 08:24 AM
Top Speed Exhauat, anyone see this yet ?	chuckd05	Intake/Exhaust	4	02-16-2010 12:10 AM