Nissan 370Z Forum - GTM TT build

Page 6 of 13

« First

Last »

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Forced Induction (http://www.the370z.com/forced-induction/)

- - GTM TT build - OCT 15th (http://www.the370z.com/forced-induction/25807-gtm-tt-build-oct-15th.html)

xbigb4ller69z

10-31-2010 05:36 PM

Yeah, I'm sending the oil pan spacer back, just to be safe.

Seb@SZ

10-31-2010 05:38 PM

Quote:

Originally Posted by SAM@GTM (Post 789821)

You should really follow the instruction and install the turbo oil return in the pan and not in a spacer, adding a spacer is ok to increase engine oil capacity but will not do as good of a job when installing the turbo oil returns in the oil pan. The VQVHR engine has a lot of oil pressure (higher then the average engine) and ball bearing turbos are very sensitive to oil pressure and return volume .

Sam

HUGE 2nd.

xbigb4ller69z

11-05-2010 01:17 PM

is anyone familiar with this?

ARK DESIGN Multi Function Dash (Engine Rev , Throttle Opening, Injector Opening, Vehicle Speed, Simple A/F , Water Temprature)

http://www.arkdesign-us.com/mfd-multi-function-dash

I currently have the prosport gauges, but I'm thinking about swapping for the MFS2. Any inputs?

theDreamer

11-05-2010 01:30 PM

Quote:

Originally Posted by xbigb4ller69z (Post 797626)

is anyone familiar with this?

ARK DESIGN Multi Function Dash (Engine Rev , Throttle Opening, Injector Opening, Vehicle Speed, Simple A/F , Water Temprature)

Multi Function Dash

I currently have the prosport gauges, but I'm thinking about swapping for the MFS2. Any inputs?

Looks good, just make sure it works properly with Nissan and you can tap properly for boost. I know some companies who make these are designed for cars that are boosted from factory since the factory ECU has a built in boost reader.

wishihadnav

11-05-2010 01:47 PM

that looks great!...Dreamer is correct to make sure they have an optional sensor/adaptor for boost..

RCZ	11-05-2010 02:02 PM

Quote:

Originally Posted by KaienZ34 (Post 782708)

Where at in Florida is this shop ? I'm in south Louisiana (about 10hrs from Disney) and looking into most likely GTM SC stg 2 kit. If there close enough i'd like to go too someone that has done a 370 or two before.

Its in West Palm Beach. Not that close...

xbigb4ller69z

11-05-2010 02:34 PM

does anyone know of a company that does the same thing as ark design that would replace all the individual gauges? (trying to avoid hks camp)

wishihadnav

11-05-2010 02:47 PM

yeah the Greddy infometer

GReddy

wishihadnav

11-05-2010 02:49 PM

this looks pretty promising as well..

http://www.the370z.com/tuning/26437-...terceptor.html

xbigb4ller69z

11-05-2010 03:09 PM

Quote:

Originally Posted by wishihadnav (Post 797837)

yeah the Greddy infometer

GReddy

Good find, but dang! if you do the math after buying all sensors we're looking at about $1,000 if not more! lol that's crazy

98intrigue

11-05-2010 03:12 PM

Quote:

Originally Posted by xbigb4ller69z (Post 797823)

does anyone know of a company that does the same thing as ark design that would replace all the individual gauges? (trying to avoid hks camp)

Talk to Chris...we drove Ian Snell's Evo X MR from Orlando to Pittsburgh and the car had the ARK gauge. I like it, but I just thought it was too small.

xbigb4ller69z

11-05-2010 03:19 PM

Quote:

Originally Posted by 98intrigue (Post 797891)

Talk to Chris...we drove Ian Snell's Evo X MR from Orlando to Pittsburgh and the car had the ARK gauge. I like it, but I just thought it was too small.

I know he told me about Ark Design, but I'm not sure if it's compatible with the 370z because is not turbo from the factory. I called Ark but no one answers the phone?? dont know

wishihadnav

11-05-2010 03:29 PM

Quote:

Originally Posted by xbigb4ller69z (Post 797884)

Good find, but dang! if you do the math after buying all sensors we're looking at about $1,000 if not more! lol that's crazy

yeah its pretty nice but it aint cheap...you gotta pay the cost to be the boss:tup:

fstrnldr

11-06-2010 07:56 PM

Quote:

Originally Posted by xbigb4ller69z (Post 797899)

I know he told me about Ark Design, but I'm not sure if it's compatible with the 370z because is not turbo from the factory. I called Ark but no one answers the phone?? dont know

Probably all at SEMA try them again next week.

xbigb4ller69z

11-10-2010 01:13 PM

40 Attachment(s)

Heres more pictures of the install... only thing left to do is install the dash unit from Ark Design. ( Car should be ready and tuned by HP LOGIC on Sunday hopefully. )

Special thanks to Danny for the pictures...

All times are GMT -5. The time now is 08:07 PM.

Page 6 of 13

« First

Last »

Show 40 post(s) from this thread on one page