Rear Mounted Turbo (scratch build)

jnaut · 09-01-2010, 10:16 PM

Quote:

Originally Posted by Zsteve

so if intake filters have to go under car then IMO this is not a good solution for DD cars. Can the filter be put in the engine bay still?

No it cant be in engine bay as the air intake is in rear of the car.

Zsteve · 09-01-2010, 10:20 PM

Quote:

Originally Posted by jnaut

No it cant be in engine bay as the air intake is in rear of the car.

couldnt you just run a long tube from the filter in the engine down to the turbo? So all the STS turbos have the filter under the car?

jnaut · 09-01-2010, 10:25 PM

Also ordered some more parts today... Intercooler pump and heat exchanger. Woot woot

Seb@SZ · 09-01-2010, 10:25 PM

Quote:

Originally Posted by Zsteve

couldnt you just run a long tube from the filter in the engine down to the turbo? So all the STS turbos have the filter under the car?

You would be causing HUGE restriction to the turbo.

Zsteve · 09-01-2010, 10:26 PM

Quote:

Originally Posted by jnaut

Also ordered some more parts today... Intercooler pump and heat exchanger. Woot woot

have you started putting this all together yet and have anything installed? If so pics.

Zsteve · 09-01-2010, 10:28 PM

Quote:

Originally Posted by Seb@SZ

You would be causing HUGE restriction to the turbo.

I would think that as long as the car is on there will be air in the tubes and a recirculating valve at the turbo will put air in too. But I really dont know.

Seb@SZ · 09-02-2010, 12:04 AM

Yeah, it doesn't really work like that. In layman's terms picture trying to suck out of a straw. The longer it is the harder it is to get air through it. Complicate things even further by adding turns and bends and you'll be choking off the compressor.

1slow370 · 09-02-2010, 05:16 AM

just use a good filter box and the filter won't get drenched like an open cone would and put a good sized stainless shield/diffuser under the turbo to keep it from getting wet rain problem solved.

jnaut · 09-03-2010, 10:25 PM

Quote:

Originally Posted by 1slow370

just use a good filter box and the filter won't get drenched like an open cone would and put a good sized stainless shield/diffuser under the turbo to keep it from getting wet rain problem solved.

exactly what i plan to do...

jnaut · 09-03-2010, 10:28 PM

So some pieces came in, but heat exchanger yet maybe wednesday. Here is a few pics, nothing mocked up yet, but soon prolly like next weekend. the seal on the ram for the lift went out, waiting for it to get backed from the hydraulic shop.

1slow370 · 09-04-2010, 02:21 AM

for a scavenge pump RB racing makes a great bronze gear pump designed for oil system use. The pumps are so over built you could use them as a seperate supply pump at 3 GPM at 30psi. the also have the supply line restrictors, backflow valves, and hell in line turbo oil filters if you wnat to run those too. remember a ball bearing turbo likes 30psi of oil pressure journal bearings a bit more. Don't skimp on the oiling like sts did or you'll be doing what i am right now, trying to improve it so the seals don't bypass oil at low throttle. Rear mounts are hard on ring seals, if your turbo has carbon seals you won't have as much of a problem.

jnaut · 09-04-2010, 08:18 AM

Quote:

Originally Posted by 1slow370

for a scavenge pump RB racing makes a great bronze gear pump designed for oil system use. The pumps are so over built you could use them as a seperate supply pump at 3 GPM at 30psi. the also have the supply line restrictors, backflow valves, and hell in line turbo oil filters if you wnat to run those too. remember a ball bearing turbo likes 30psi of oil pressure journal bearings a bit more. Don't skimp on the oiling like sts did or you'll be doing what i am right now, trying to improve it so the seals don't bypass oil at low throttle. Rear mounts are hard on ring seals, if your turbo has carbon seals you won't have as much of a problem.

I have already ordered the scavenge pump, as for the oil feed /return line. running 4-AN braided stainless line and 8-AN push lock oil return line.

Base-Model Pump

Boost_lee · 09-04-2010, 12:59 PM

Jnaut - how much was the universal piping kit if you dont mind me asking? Is it Aluminum or mild steel?

jnaut · 09-04-2010, 01:50 PM

Quote:

Originally Posted by Boost_lee

Jnaut - how much was the universal piping kit if you dont mind me asking? Is it Aluminum or mild steel?

$90 shipped , and its aluminum

Zsteve · 09-10-2010, 11:52 PM

updates?

09-01-2010, 10:25 PM	#63 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	Also ordered some more parts today... Intercooler pump and heat exchanger. Woot woot __________________ Best 1/4 mile 12.24 Best mph 114.5_______

09-02-2010, 12:04 AM	#67 (permalink)
Seb@SZ Enthusiast Member Join Date: Jan 2010 Location: Chatsworth Posts: 277 Drives: Zs Rep Power: 24	Yeah, it doesn't really work like that. In layman's terms picture trying to suck out of a straw. The longer it is the harder it is to get air through it. Complicate things even further by adding turns and bends and you'll be choking off the compressor. __________________ Z Car Specialists www.specialtyz.com Blog http://specialtyz.com/blog/

09-02-2010, 05:16 AM	#68 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	just use a good filter box and the filter won't get drenched like an open cone would and put a good sized stainless shield/diffuser under the turbo to keep it from getting wet rain problem solved. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

09-03-2010, 10:28 PM	#70 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	So some pieces came in, but heat exchanger yet maybe wednesday. Here is a few pics, nothing mocked up yet, but soon prolly like next weekend. the seal on the ram for the lift went out, waiting for it to get backed from the hydraulic shop. __________________ Best 1/4 mile 12.24 Best mph 114.5_______

09-04-2010, 02:21 AM	#71 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	for a scavenge pump RB racing makes a great bronze gear pump designed for oil system use. The pumps are so over built you could use them as a seperate supply pump at 3 GPM at 30psi. the also have the supply line restrictors, backflow valves, and hell in line turbo oil filters if you wnat to run those too. remember a ball bearing turbo likes 30psi of oil pressure journal bearings a bit more. Don't skimp on the oiling like sts did or you'll be doing what i am right now, trying to improve it so the seals don't bypass oil at low throttle. Rear mounts are hard on ring seals, if your turbo has carbon seals you won't have as much of a problem. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

09-04-2010, 12:59 PM	#73 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 29	Jnaut - how much was the universal piping kit if you dont mind me asking? Is it Aluminum or mild steel?

09-10-2010, 11:52 PM	#75 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	updates? __________________ 2010 LS3 C6 Silver coupe corvette

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AAM Competition/Lou Fusz Nissan: 370Z Twin Turbo Build	Jon@Altered	Forced Induction	987	05-25-2012 09:47 AM
2010 370Z NISMO Twin Turbo build courtesy of GTM	stormcrow	Forced Induction	273	02-16-2011 07:41 AM
TITAN's Twin Turbo build Done!!!!!!	kenbains12	Forced Induction	49	06-18-2010 08:32 AM
TITAN installed Greddy Twin Turbo build Done!!!!!!	kenbains12	Tuning	2	06-10-2010 08:34 PM
Rear mounted turbo kit	Brazilbro	Forced Induction	64	06-29-2009 07:39 PM