Nw vq37 tt

SharpByCoop · 09-06-2010, 10:34 PM

Subscribed...

I also have a 2008 G37S, and I'm about to order the same kit. Looking forward to continued results. I have an auto and so I'll need a few supporting mods in that department, but it sure sounds like it's a go. Thanks for the post.

Regarding the Synchronic BOV: I had a Synchronic on my Subaru STI and after changing and futzing with settings, it worked PERFECTLY. Yes, there are a few adjustments, and you DO need to plumb back into the intake, especially with the MAF. It is quieter if you do so, too. (For me: A good thing. Others: Not so important)

The low throttle response was immediate and gave zero flutter, which I couldn't lose with the TIAL. I'd be giving those a try once again. Glad to know the TIALS are OK, though.

Don't know anything about the other brand.

Jim

Greedy · 09-06-2010, 10:48 PM

Quote:

Originally Posted by WarmAndSCSI

lol Lou, I knew you'd have something to say.

I like(d) them as well, but it's common-accepted truth that they're not healthy for high-volume turbochargers or even some stockers - they cause unnecessary compressor surge/flutter in some applications, and quite often leak under high boost.

2 SSQV's is actually a really good setup to eliminate flutter and surge (plus it sounds bad ***), but I'd still rather have something else if I were parting together a kit.

My point is: Synapse Synchronic BOV's are indeed legit. I wouldn't call them an HKS knock off at all.

I have the Synapse bov's and another set of upper charge pipes with the Synchronic flange welded on, so I am going to try them again either with the anti-stall kit or recirculated. I am getting a little compressor surge at very low boost levels. I am going to try to adjust the tial's first and see what happens.

WarmAndSCSI · 09-06-2010, 11:00 PM

Quote:

Originally Posted by Greedy

I have the Synapse bov's and another set of upper charge pipes with the Synchronic flange welded on, so I am going to try them again either with the anti-stall kit or recirculated. I am getting a little compressor surge at very low boost levels. I am going to try to adjust the tial's first and see what happens.

There should be no need to recirc; your setup is a blow-through hot-wire MAF setup and your BOV's are prior to the MAF. It might just take some adjusting and whatnot - I know the Synchronics are picky about the vacuum line plumbing.

Greedy · 09-07-2010, 11:13 PM

Here's a few more shots from the trip....

HKS EVC Boost Controller

Vegas and Salt Lake

fstrnldr · 09-10-2010, 02:12 AM

Quote:

Originally Posted by Greedy

I am getting a little compressor surge at very low boost levels.

Let me guess this happens at very light throttle as well?

Greedy · 09-10-2010, 09:17 AM

Quote:

Originally Posted by fstrnldr

Let me guess this happens at very light throttle as well?

No - none when any throttle is applied. Just when in first or second and getting up to about 1-2 psi at 3k then shifiting. It's only a quick, momentary flutter that sounds like a little surge. Any more rpm's or boost and it blows off completley.

SharpByCoop · 09-11-2010, 10:55 AM

I am not familiar with the spring tuning on the Tial's, but I understand that's a source to look into for the cure.

That flutter was consistent and annoying on my Subaru with a Tial, and my experience with the Synchonic ended up curing that. 95% of the time we are at low throttle and boost.

Looking forward to your experiences. Thanks for the updates.

Coop

tsui_san · 09-16-2010, 01:08 PM

Subscribed for results! Would love to get more info on the intake manifold.

Red__Zed · 09-16-2010, 08:35 PM

Quote:

Originally Posted by SAM@GTM

Just a little update, he has been on the roed for the last couple days, posted this yesterday on the G37 board .

And here is the before and after dyno

Nice number!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VQ35DE vs. VQ37?	ImportConvert	Forced Induction	14	06-27-2010 12:34 AM
Price of VQ37?	roddyalan	Engine & Drivetrain	16	06-05-2010 04:19 AM
vq37 for sale	1uk32	Parts for sale (Private Classifieds)	36	11-17-2009 09:46 PM
vq37 for sale	1uk32	Drivetrain/Engine	2	10-06-2009 03:46 AM
Vq37 + z32???	Crash	The Lounge (Off Topic)	21	03-10-2009 12:25 AM

09-06-2010, 10:34 PM	#31 (permalink)
SharpByCoop Enthusiast Member Join Date: Sep 2010 Location: Connecticut Posts: 286 Drives: '08 G37S - Graphite Rep Power: 15	Subscribed... I also have a 2008 G37S, and I'm about to order the same kit. Looking forward to continued results. I have an auto and so I'll need a few supporting mods in that department, but it sure sounds like it's a go. Thanks for the post. Regarding the Synchronic BOV: I had a Synchronic on my Subaru STI and after changing and futzing with settings, it worked PERFECTLY. Yes, there are a few adjustments, and you DO need to plumb back into the intake, especially with the MAF. It is quieter if you do so, too. (For me: A good thing. Others: Not so important) The low throttle response was immediate and gave zero flutter, which I couldn't lose with the TIAL. I'd be giving those a try once again. Glad to know the TIALS are OK, though. Don't know anything about the other brand. Jim

09-07-2010, 11:13 PM	#34 (permalink)
Greedy Base Member Join Date: Jun 2010 Location: Woodinville, WA Posts: 46 Drives: G37 Rep Power: 15	Here's a few more shots from the trip.... HKS EVC Boost Controller Vegas and Salt Lake

09-11-2010, 10:55 AM	#37 (permalink)
SharpByCoop Enthusiast Member Join Date: Sep 2010 Location: Connecticut Posts: 286 Drives: '08 G37S - Graphite Rep Power: 15	I am not familiar with the spring tuning on the Tial's, but I understand that's a source to look into for the cure. That flutter was consistent and annoying on my Subaru with a Tial, and my experience with the Synchonic ended up curing that. 95% of the time we are at low throttle and boost. Looking forward to your experiences. Thanks for the updates. Coop

09-16-2010, 01:08 PM	#38 (permalink)
tsui_san Base Member Join Date: Mar 2010 Location: Bay Area Posts: 20 Drives: 07 G35S Sedan Rep Power: 16	Subscribed for results! Would love to get more info on the intake manifold.