FSP: Stillen Supercharger Installation

LiquidZ · 08-10-2010, 11:41 AM

Quote:

Originally Posted by Chris@FsP

They are not supported by a bracket or anything, but once all of the hose clamps are tightened down, it is pretty secure. The tubing is so short and the assembly is so light that I suppose Stillen didn't see a need for a support piece.

That is scary IMO. I can easily see something coming loose or a hose coupler failing after repeated impacts from pot-holes or bumps taken at speed.

I'm an engineer by day, and I don't care how light-weight something is, it still needs support. The fact of the matter is that that the intake still has weight, and that weight is positioned a few inches from that coupling, which causes a bending moment. I don't see why Stillen wouldn't take the extra effort to ensure it is secure? It just seems lazy to me...

Thanks for answering my question, FSP. The install does look good though.

weiboy718 · 08-10-2010, 01:26 PM

Quote:

Originally Posted by LiquidZ

That is scary IMO. I can easily see something coming loose or a hose coupler failing after repeated impacts from pot-holes or bumps taken at speed.

I'm an engineer by day, and I don't care how light-weight something is, it still needs support. The fact of the matter is that that the intake still has weight, and that weight is positioned a few inches from that coupling, which causes a bending moment. I don't see why Stillen wouldn't take the extra effort to ensure it is secure? It just seems lazy to me...

Thanks for answering my question, FSP. The install does look good though.

I'm not sure about you guys but mines came with a plate that prevents the Intake from falling.

RCZ · 08-10-2010, 03:51 PM

Umm...those things are on there tight...they are not going anywhere. I know what you mean LiquidZ, but those coming off is not a realistic concern IMO. I'm sure even if the clamp loosened and came off, you would still need a screw driver to pry the damn thing off the inlet.

Awesome build, hopefully Uprev will figure this one out soon...

LateralG'z · 08-10-2010, 06:14 PM

Quote:

Originally Posted by LiquidZ

That is scary IMO. I can easily see something coming loose or a hose coupler failing after repeated impacts from pot-holes or bumps taken at speed.

I'm an engineer by day, and I don't care how light-weight something is, it still needs support. The fact of the matter is that that the intake still has weight, and that weight is positioned a few inches from that coupling, which causes a bending moment. I don't see why Stillen wouldn't take the extra effort to ensure it is secure? It just seems lazy to me...

Thanks for answering my question, FSP. The install does look good though.

What kind of an engineer?

LiquidZ · 08-10-2010, 06:17 PM

Quote:

Originally Posted by LateralG'z

What kind of an engineer?

Civil.

LateralG'z · 08-10-2010, 06:31 PM

Quote:

Originally Posted by LiquidZ

Civil.

Do you do roads and street layout or building calcs etc... Seismic perhaps?
okay back on topic sorry Chris

LiquidZ · 08-10-2010, 06:41 PM

Quote:

Originally Posted by LateralG'z

Do you do roads and street layout or building calcs etc... Seismic perhaps?
okay back on topic sorry Chris

Nope. I'm working with a firm dealing primarily with some major construction projects for the local wastewater plants.

LateralG'z · 08-10-2010, 06:49 PM

Poo water, sounds like fun

weiboy718 · 08-10-2010, 07:13 PM

as long as it pay's good i wouldn't mind cleaning it at all haha.

LiquidZ · 08-10-2010, 07:54 PM

The wastewater plants have some of the biggest superchargers too

Red370 · 08-10-2010, 10:15 PM

I wanna be a civil engineer, design septic tanks for playgrounds, so little kids can take shits.

Chris@FsP · 08-10-2010, 10:33 PM

Red, does Shittown USA happen to be located within the OK state lines?

OKC370Z · 08-10-2010, 10:33 PM

Quote:

Originally Posted by LateralG'z

Have started the second Stillen kit yet? OKC must be getting excited

I wish, apparently Stillen is not shipping the kit until the tune is worked out. So, now my car is sitting at Failsafe collecting dust.

Red370 · 08-10-2010, 10:38 PM

Quote:

Originally Posted by Chris@FsP

Red, does Shittown USA happen to be located within the OK state lines?

yeah, the giant septic tank of Texoma known as Lawton, I hope the mayor of this town shits a fig seed and dies of anal warts.

weiboy718 · 08-10-2010, 10:55 PM

so how did a beautiful SC thread turned into a **** thread???

back on topic lol

08-10-2010, 06:49 PM	#23 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 17	Poo water, sounds like fun __________________ 2010 Mag Black, 6MT,

08-10-2010, 07:54 PM	#25 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	The wastewater plants have some of the biggest superchargers too __________________

08-10-2010, 10:15 PM	#26 (permalink)
Red370 A True Z Fanatic Join Date: Jul 2009 Location: Kaiserslautern, Germany Posts: 4,391 Drives: your mom to church Rep Power: 296	I wanna be a civil engineer, design septic tanks for playgrounds, so little kids can take shits. __________________ 2011 Mustang 5.0 \| 3.55's \| Lethal Performance off road H-Pipe \| Magnaflow Muffler Delete \| JLT CAI/Bama tuned 417whp/ 404 ft/lbs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.	SAM@GTM	Forced Induction	311	09-07-2011 04:42 AM
Supercharger Installation Manuals	GUTCH	Forced Induction	15	08-06-2010 04:34 AM
Stillen Supercharger kit!	370Ztune	Drivetrain/Engine	8	07-23-2010 07:20 PM
Preparation for the STILLEN supercharger	Kyle@STILLEN	Forced Induction	1087	03-13-2010 06:59 AM

08-10-2010, 03:51 PM	#18 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Umm...those things are on there tight...they are not going anywhere. I know what you mean LiquidZ, but those coming off is not a realistic concern IMO. I'm sure even if the clamp loosened and came off, you would still need a screw driver to pry the damn thing off the inlet. Awesome build, hopefully Uprev will figure this one out soon...

08-10-2010, 07:13 PM	#24 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 16	as long as it pay's good i wouldn't mind cleaning it at all haha.

08-10-2010, 10:33 PM	#27 (permalink)
Chris@FsP Enthusiast Member Join Date: Dec 2009 Location: Tulsa, OK Posts: 430 Drives: 2008 350Z TT Rep Power: 368	Red, does Shittown USA happen to be located within the OK state lines?

08-10-2010, 10:55 PM	#30 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 16	so how did a beautiful SC thread turned into a **** thread??? back on topic lol