Forced Induction Finished Builds

blackbird · 10-01-2011, 07:00 PM

2009 Base Model
GTM stage 2 Kit Installed and tuned by John at Z1
512 RWHP/ can;t find chart but high 400 torque
original at 8.5 upgraded to 10.5 PSI with Geiken clutch
Approx 10,000 Miles
Additional;
Z1: Oil Cooler, HKS EVC, MAF
NISMO: shocks, springs, Sway bars, Rear Spoiler, Rear Fascia.
Akebono brakes, Upgraded Z1 rotors and Ceramic pads
Nissan: Rays Wheels, 2011 Sport LSD & HD Axles (Broke original w/ Quaife LSD)
Bridgestone Pole Position 04 tires
Alpine speakers and Amp
Stillen: Front fascia, Under pulley, HFC, CBE
Powder coat wheels, 20% window tint, Painted door handles
OS Geiken Clutch
Kept OEM 18" wheels and Blizzaks for winter. They work fine.

blackbird · 10-01-2011, 07:02 PM

BTw have gone through 3 sensors, 2 for air flow and 1 something else like that. Light comes on, I go to dealer, they check and replace broke sensor. I don't really care what they are. has anyone else had any issue sensors??

theDreamer · 10-01-2011, 07:48 PM

Quote:

Originally Posted by blackbird

BTw have gone through 3 sensors, 2 for air flow and 1 something else like that. Light comes on, I go to dealer, they check and replace broke sensor. I don't really care what they are. has anyone else had any issue sensors??

Check the wiring and make sure nothing is contacting it directly which might be burning them up.

DIGItonium · 10-01-2011, 08:46 PM

Think a monospace font and "|" character would help?

blackbird · 10-17-2011, 01:19 PM

Dreamer: made suggestion to dealer mechanic. He checked all ground wires, a couple were a little dirty. He cleaned them and tightened and lines. So far so good! Thanks.

Dembflyr · 10-25-2011, 09:25 AM

Ok. I finally got on a dyno so here are the numbers for me.

2009
GTM Stage 1 Twin Turbo
474 WHP / 396 TQ
8 PSI
5000+ miles since install
Stock clutch / 34 row oil cooler with thermostatic plate / AFR gauge

theDreamer · 10-25-2011, 09:45 AM

Quote:

Originally Posted by Dembflyr

Ok. I finally got on a dyno so here are the numbers for me.

2009
GTM Stage 1 Twin Turbo
474 WHP / 396 TQ
8 PSI
5000+ miles since install
Stock clutch / 34 row oil cooler with thermostatic plate / AFR gauge

Nope, to late, not adding you.

KaienZ34 · 10-25-2011, 10:00 AM

Quote:

Originally Posted by theDreamer

Nope, to late, not adding you.

What a meany...

Dembflyr · 10-25-2011, 11:30 AM

Quote:

Originally Posted by theDreamer

Nope, to late, not adding you.

Well, in my defense, it does say "Finished Builds" and I don't think I'll ever be finished.

Nissan370 · 11-02-2011, 06:20 PM

'09 touring z

Stillen superchger 8psi
Ark exuast and random tech hfc
450whp/331rwtq

400 miles since install

theDreamer · 11-02-2011, 10:35 PM

Quote:

Originally Posted by Nissan370

'09 touring z

Stillen superchger 8psi
Ark exuast and random tech hfc
450whp/331rwtq

400 miles since install

Added, if you have a journal or longer build thread you should add it to your post.

Nissan370 · 11-03-2011, 11:54 AM

Ok crap dreamer repost i was already added sry man 331tq not 321 thxs

theDreamer · 11-03-2011, 01:58 PM

Quote:

Originally Posted by Nissan370

Ok crap dreamer repost i was already added sry man 331tq not 321 thxs

Ah, fixed it.

BuckBarley · 11-03-2011, 03:00 PM

FI ETs & traps anyone? I'd like to see what these high HP numbers are turning out at the strip. Thanks!

Zat_Zuma · 11-03-2011, 03:51 PM

I would have that for everyone but I had/have a few problems that are still trying to be worked out on my GTM Stage 1 kit. Sooo ....with some high AFR's & EGT's numbers and with that I'm unable to properly complete a dyno tune. SO that means no 1/4 mile runs to report and no dyno sheets to post

Wait til next year

10-01-2011, 08:46 PM	#94 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 43	Think a monospace font and "\|" character would help? __________________

10-25-2011, 09:25 AM	#96 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 17	Ok. I finally got on a dyno so here are the numbers for me. 2009 GTM Stage 1 Twin Turbo 474 WHP / 396 TQ 8 PSI 5000+ miles since install Stock clutch / 34 row oil cooler with thermostatic plate / AFR gauge __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

11-02-2011, 06:20 PM	#100 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	'09 touring z Stillen superchger 8psi Ark exuast and random tech hfc 450whp/331rwtq 400 miles since install __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

11-03-2011, 11:54 AM	#102 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	Ok crap dreamer repost i was already added sry man 331tq not 321 thxs __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

11-03-2011, 03:51 PM	#105 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	I would have that for everyone but I had/have a few problems that are still trying to be worked out on my GTM Stage 1 kit. Sooo ....with some high AFR's & EGT's numbers and with that I'm unable to properly complete a dyno tune. SO that means no 1/4 mile runs to report and no dyno sheets to post Wait til next year __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

10-01-2011, 07:00 PM	#91 (permalink)
blackbird Base Member Join Date: May 2009 Location: Nashua NH Posts: 179 Drives: 09 370Z BLk GTM TT Rep Power: 16	2009 Base Model GTM stage 2 Kit Installed and tuned by John at Z1 512 RWHP/ can;t find chart but high 400 torque original at 8.5 upgraded to 10.5 PSI with Geiken clutch Approx 10,000 Miles Additional; Z1: Oil Cooler, HKS EVC, MAF NISMO: shocks, springs, Sway bars, Rear Spoiler, Rear Fascia. Akebono brakes, Upgraded Z1 rotors and Ceramic pads Nissan: Rays Wheels, 2011 Sport LSD & HD Axles (Broke original w/ Quaife LSD) Bridgestone Pole Position 04 tires Alpine speakers and Amp Stillen: Front fascia, Under pulley, HFC, CBE Powder coat wheels, 20% window tint, Painted door handles OS Geiken Clutch Kept OEM 18" wheels and Blizzaks for winter. They work fine.

10-01-2011, 07:02 PM	#92 (permalink)
blackbird Base Member Join Date: May 2009 Location: Nashua NH Posts: 179 Drives: 09 370Z BLk GTM TT Rep Power: 16	BTw have gone through 3 sensors, 2 for air flow and 1 something else like that. Light comes on, I go to dealer, they check and replace broke sensor. I don't really care what they are. has anyone else had any issue sensors??

10-17-2011, 01:19 PM	#95 (permalink)
blackbird Base Member Join Date: May 2009 Location: Nashua NH Posts: 179 Drives: 09 370Z BLk GTM TT Rep Power: 16	Dreamer: made suggestion to dealer mechanic. He checked all ground wires, a couple were a little dirty. He cleaned them and tightened and lines. So far so good! Thanks.

11-03-2011, 03:00 PM	#104 (permalink)
BuckBarley Base Member Join Date: Jan 2011 Location: Sacramento, California Posts: 16 Drives: '11/Base/Sport/6MT Rep Power: 15	FI ETs & traps anyone? I'd like to see what these high HP numbers are turning out at the strip. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 01:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 01:14 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 01:36 AM
Forced Induction gains and 7AT	kannibul	Forced Induction	18	10-14-2009 01:36 PM
Best trans for forced induction	madweazl	Engine & Drivetrain	24	08-07-2009 05:20 PM