Forced Induction Finished Builds

BC416 · 02-02-2017, 08:59 AM

Quote:

Originally Posted by Jshvr

Video is on Z1's page

https://www.facebook.com/Z1Motorspor...5684032782219/

Sent from my iPhone using Tapatalk

Awesome man. Car is very clean

kentmo280z · 08-15-2017, 09:05 PM

Update on a new tune performed by Dynosty, Louisville, Ky.

2010, 370z Roadster

GTM Stage 1.5 S.C. w/ 88mm pulley ( Thanks for the pulley Matt!)

479 RWHP / 360 Tq.

9.5 PSI

93 Octane

25k miles on S.C.

theDreamer · 08-18-2017, 09:43 AM

Excellent numbers Kent!
I just got mine re-tuned but with 100+ temps (and a very log reading dyno dynamics) and the old intake pipes (never could get mine to fit), we ran out of MAF and are still at 8PSI with 400HP.

jwick · 08-18-2017, 10:03 AM

Quote:

Originally Posted by theDreamer

Excellent numbers Kent!
I just got mine re-tuned but with 100+ temps (and a very log reading dyno dynamics) and the old intake pipes (never could get mine to fit), we ran out of MAF and are still at 8PSI with 400HP.

About time that thing was on the road again! Kosmic tune it?

theDreamer · 08-18-2017, 12:58 PM

Quote:

Originally Posted by jwick

About time that thing was on the road again! Kosmic tune it?

Yep, and the moment I get it back and plan to enjoy it on the weekends my wife's 350z radiator sprung a leak. Now I get to DD my Z in summer...fun!

jwick · 08-18-2017, 01:24 PM

Radiator replacement shouldn't be too bad to knock out.

theDreamer · 08-18-2017, 02:57 PM

Quote:

Originally Posted by jwick

Radiator replacement shouldn't be too bad to knock out.

Should be straight forward, plan is to tackle over a weekend (or two if needed), with the heat I only want to be in the garage for a few hours at a time.

brucelidat · 06-30-2018, 02:00 AM

Is this list still being actively updated? I am running Topgunz's modified Stillen kit and am making 488whp 398 wtrq.

jchammond · 06-30-2018, 09:40 AM

Quote:

Originally Posted by brucelidat

Is this list still being actively updated? I am running Topgunz's modified Stillen kit and am making 488whp 398 wtrq.

Being you have 4.08's out back; Did they Dyno in 5th gear (1:1)?

brucelidat · 06-30-2018, 01:36 PM

I believe so.

theDreamer · 07-02-2018, 10:50 AM

When I get new messages or replies in this thread I attempt to update it, have not received but lately.
I don't try to go through each post and dig out numbers as I am not sure if they are 'final' or people still working.

brucelidat · 07-02-2018, 12:33 PM

Quote:

Originally Posted by theDreamer

When I get new messages or replies in this thread I attempt to update it, have not received but lately.
I don't try to go through each post and dig out numbers as I am not sure if they are 'final' or people still working.

I do t expect ypu to be scouring the firum. Just easnt sure if this was,still active and letting you know in case it was.

theDreamer · 07-03-2018, 07:34 AM

Quote:

Originally Posted by brucelidat

I do t expect ypu to be scouring the firum. Just easnt sure if this was,still active and letting you know in case it was.

Thank you, I think many FI builds are off the forum (instagram/FB) has made people less likely to join and post.
I have seen a number of cars on instagram lately that I have never seen here with a T/TT/SC.

Cars_go_vroom · 01-16-2019, 10:02 PM

Are any of ya'll using 2000cc+ fuel injectors?

For those near 600+ TQ what clutch are you using? Really impressive numbers out there.

I'm at 809whp/593tq at 18psi. But discovered some issues as we were tuning the car.

Spooler · 01-16-2019, 10:47 PM

Quote:

Originally Posted by Cars_go_vroom

Are any of ya'll using 2000cc+ fuel injectors?

For those near 600+ TQ what clutch are you using? Really impressive numbers out there.

I'm at 809whp/593tq at 18psi. But discovered some issues as we were tuning the car.

Most folks use 1300cc when running E85.

08-18-2017, 09:43 AM	#813 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Excellent numbers Kent! I just got mine re-tuned but with 100+ temps (and a very log reading dyno dynamics) and the old intake pipes (never could get mine to fit), we ran out of MAF and are still at 8PSI with 400HP. kentmo280z likes this. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

08-18-2017, 01:24 PM	#816 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	Radiator replacement shouldn't be too bad to knock out. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

06-30-2018, 02:00 AM	#818 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	Is this list still being actively updated? I am running Topgunz's modified Stillen kit and am making 488whp 398 wtrq. jchammond and ZontheRocks like this. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

06-30-2018, 01:36 PM	#820 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 31	I believe so. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

07-02-2018, 10:50 AM	#821 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	When I get new messages or replies in this thread I attempt to update it, have not received but lately. I don't try to go through each post and dig out numbers as I am not sure if they are 'final' or people still working. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

08-15-2017, 09:05 PM	#812 (permalink)
kentmo280z Base Member Join Date: Sep 2014 Location: Akron , Ohio Posts: 199 Drives: '10 370Z Roadster Rep Power: 11	Update on a new tune performed by Dynosty, Louisville, Ky. 2010, 370z Roadster GTM Stage 1.5 S.C. w/ 88mm pulley ( Thanks for the pulley Matt!) 479 RWHP / 360 Tq. 9.5 PSI 93 Octane 25k miles on S.C.

01-16-2019, 10:02 PM	#824 (permalink)
Cars_go_vroom Base Member Join Date: Jun 2017 Location: America Posts: 112 Drives: 370 Rep Power: 8	Are any of ya'll using 2000cc+ fuel injectors? For those near 600+ TQ what clutch are you using? Really impressive numbers out there. I'm at 809whp/593tq at 18psi. But discovered some issues as we were tuning the car.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 01:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 01:14 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 01:36 AM
Forced Induction gains and 7AT	kannibul	Forced Induction	18	10-14-2009 01:36 PM
Best trans for forced induction	madweazl	Engine & Drivetrain	24	08-07-2009 05:20 PM