Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Forced Induction Finished Builds (http://www.the370z.com/forced-induction/21711-forced-induction-finished-builds.html)

jwick 05-28-2014 08:28 AM

Quote:

Originally Posted by theDreamer (Post 2836710)
Back from my honeymoon guys so will be updating this and other threads soon.
Anyone else needing to be added please post up details.

JTran is upgrading to a DynoJet so I should have comparable numbers end of June

JWillis72 05-28-2014 08:59 AM

Quote:

Originally Posted by theDreamer (Post 2836710)
Back from my honeymoon

Congratulations Dreamer!

Hotrodz 05-28-2014 09:32 AM

Welcome back and congrats on your marriage and honeymoon!

theDreamer 05-28-2014 10:02 AM

Thanks guys, I think all the Houston guys will be updating soon with a new dynojet going in.
Sucks it will be middle of summer though.

jwick 05-28-2014 10:04 AM

Quote:

Originally Posted by theDreamer (Post 2836915)
Sucks it will be middle of summer though.

True but I'm getting a new exhaust fabricated to meet up with the BP downpipe. It's going to require a retune anyway so I'll get the numbers anyway.

68cam454 06-01-2014 11:43 PM

- Year - 2011 Nismo
- Kit used - Stillen SC
- Current HP/Torque - 451WHP/319TQ
- Current PSI - 8PSI
- Miles since kit installed - ~ 400 miles
-Other Installed Upgrades:
Stillen 25 Row Oil Cooler
Berk HFC's
Berk Catback
Galeforce Pillar pod
AEM Wideband Failsafe Gauge (AFR + Boost)
AEM Oil Pressure Gauge

About to install:
Stillen J-Hook front rotors + Hawk pads (In hand)
SS Brake and clutch lines (In hand)
Motul 600 brake and clutch fluid (In hand)
Nismo finned Diff cover (Ordering from Z1 next week)
Redline 75W90 Diff fluid (Ordering from Z1 next week)
Redine MT85 Trans fluid (Ordering from Z1 next week)
Clutch when it lets go.....I'm sure it wont be long.

Portland Speed Industries ( Portland Speed Industries) does an amazing job of tuning our Z's and mine was tuned by the owner and lead tuner Jason.....I asked him to tune it as a daily driver and not go for max power. The typical numbers they get from the Stillen kit is around 400WHP to 410WHP but mine made a little more than he expected.
http://www.the370z.com/members/68cam...stillen-sc.jpg

Hotrodz 06-02-2014 07:57 AM

Very impressive numbers and congrats on your build!

theDreamer 06-02-2014 02:07 PM

Updating the first posts with new builds, here are all who are being added:

Quote:

Originally Posted by 09 Nismo#400
not sure if you wanted me to post in your thread or just reply:

-Year:2009
-Kit used: BP V1 1.00 a/r turbine housing
-Current HP/Torque: 534/455
-Current PSI: 10
-Miles since kit installed: 2,000
-Other upgrades: E85, ID1000 injectors, South Bend ZSpeed Stage 3.5 Clutch, Black Southbend DXD Solid Billet Steel Lightweight flywheel, ZSpeed HD CSC.

https://farm4.staticflickr.com/3770/...e5079f42b8.jpg

-Future370zzz
-FancoPhoto
-Dirty_shoez
-68cam454

Chuy 07-22-2014 02:58 PM

http://www.the370z.com/members/chuy-...horsepower.jpg
Add me please.

-Year 2009 auto 7Speed
-Kit used Stillen Super Charger
-Current HP/Torque 400.62HP/ 302.56
-Current PSI 9LBS Pulley with elevation 6,035ft 7.2lbs
-Miles since kit installed less then 1,00
-Other upgrades Z1 29 row oil cooler

theDreamer 07-22-2014 03:01 PM

Eh....no. :p
Chuy, have your build and a few more to add this week.

theDreamer 07-30-2014 08:40 AM

Quote:

2010 AT7
Stillen Supercharger Kit - 12 p.s.i. Pully
Brian Crower Stoker Kit
Stillen Dual Catback
Stillen Test Pipes
Road Magnet Springs
Tuned by AAM.
469hp 357ft-lbs
Car is owned by: Ramirez_751

JWillis72 08-16-2014 06:31 PM

1 Attachment(s)
Spent some time at the tuners today and we found a little more power. It had done 406 hp before but our first pull today was only 386hp but it also was 95 degrees and 80% humidity.

irondoc 08-25-2014 01:20 PM

Dreamer, recently noticed you don't have my psi for my Stillen package. I am running the stock 8psi pulley.

theDreamer 08-25-2014 01:49 PM

Quote:

Originally Posted by irondoc (Post 2942521)
Dreamer, recently noticed you don't have my psi for my Stillen package. I am running the stock 8psi pulley.

Will add it, thank you.

theDreamer 09-11-2014 01:06 PM

Big changes in the TT group added today.
Phunk hit 671HP on e85 & stock block

Added new TT owners:
mfeinst
Unknown RT
Gender777

Also modified the TT graph, it is now in a spoiler tab as it is much larger, the group keeps growing. Working on adding a few more details to the graph & cleaning up the list, once that is done I will apply to the SC and T lists also.

As always, if you have or known someone with a boost build please post it up, send me a PM, etc. so I can add them.


All times are GMT -5. The time now is 07:52 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2