Forced Induction Finished Builds

OKC370Z · 08-29-2010, 06:52 AM

Chart= Clendar, schedule, spread sheet. Something the tuner uses to schedule and keep track of scheduled dyno appointments.

I have found most tuners are not very organized. The ones that are were smart enough to hire someone to come in and organize them and take care of the administartive functions.

B1nks · 09-02-2010, 01:07 AM

Hey dreamer pm me the tuner you're referring to and maybe I can help you out ! I'm also simply curious who is jerking you around.

OKC370Z · 09-13-2010, 09:42 PM

2009 370z w/7AT
Stillen FI kit
389 HP / 290 TQ
8 psi
600 miles since install

Also installed oil cooler and trans cooler.

As soon as transgo kit is available I'll install one.

theDreamer · 09-13-2010, 09:44 PM

Thanks OKC, added you.

Seether13 · 10-08-2010, 06:40 AM

Did anyone have to sacrifice anything in doing the FI conversions? Like aircon, etc.

theDreamer · 10-08-2010, 08:59 AM

Quote:

Originally Posted by Seether13

Did anyone have to sacrifice anything in doing the FI conversions? Like aircon, etc.

Technically no, but you will sacrifice tires maybe.

Seether13 · 10-09-2010, 06:21 AM

Quote:

Originally Posted by theDreamer

Technically no, but you will sacrifice tires maybe.

hehe

OKC370Z · 10-31-2010, 12:52 PM

I am posting this separately from the Stillen thread so it does not get lost in the hoopla. I want people to know that are some cars with the Stillen FI kit that have been working well with no real issues since day one and I have put about 3200 miles on this kit including one track day at Hallet Motor Speedway.

My car is a 2009 A7 and the FI kit has been installed since September 1st. The kit was installed with about 6,800 miles on it by Chris Cartwright with Failsafe Performance in Tulsa, OK.

The car was originally dyno’d prior to the FI install and produced 272 rwhp and 227 rwtq. Two weeks later after the install the car was dyno’d again on the same dyno under similar conditions and the car produced 389 rwhp and 290 rwtq. That’s a difference of 117 rwhp and 63 rwtq on 91 octane.

The results may not be what Stillen advertised but drivability is excellent and the increase in performance is very noticeable. First gear is almost useless and second gear has major traction issues. I love swinging out the rear in second gear as I am going through a turn in a very nice controllable fashion and then accelerating out of the turn.

The only noticeable issues are 1) when the motor is heat saturated and I stop the car and then get back in it, at times, it will not start without giving it a bit of throttle. At first I was like what the heck? But now that I am familiar with it I am prepared to give it a little throttle if it does not start right off as normal. It’s really not that big a deal now that I know what to expect and what to do. 2) When the temperatures dropped recently I started to experience some tip-in knock (detonation) when giving throttle under load. This happens mostly when at cruise and the trans is in a higher gear and the motor is in the lower rpm’s. To ensure I was experiencing knock I went to one of the few stations left in OKC that has 93 octane fuel, turns out that they had 101 octane for all the high end cars in the area (Porches, Lambos, Ferrari’s, etc.). I had half a tank of 91 octane in the car so I decided to fill up the 101 octane since the very next day I was participating in a track day. Once the fuel was mixed in, later that day I noticed a very noticeable increase in power across the board. I was surprised that increasing the octane would not only eliminate the tip-in knock but also increase the power as much as it did. I later found out talking to a friend of mine who was a Mercedes/Audi mechanic that Nissan’s VQ37 platform has a really nice knock sensing strategy that advances timing to maximize performance until knock is experienced and then adjusts accordingly. Wow! Is all I can say and now I try to fill up with the 93 octane (since the station is by my office) for the increased performance.

Does the Stillen kit produce as promised and without any issues? Well, not entirely but, performance is a bit subjective based on dyno’s, conditions, octane fuel, etc. and quite frankly I am very happy with the performance and the drivability of the car. The issues I am experiencing are minor and easily dealt with. So, overall I am very pleased with the Stillen FI kit and I am very, very pleased with my 370Z overall. My experience at the track day a week ago today was awesome. Unfortunately the weather sucked and we experience rain most of the day. However, the first two sessions of the day were dry (though chilly/cold track) and I was able to easily hang with a supercharged Corvette Z06 putting down 650 rwhp. We both kept our VDC systems activated since track conditions were not ideal. I actually had fun and enjoyed learning to drive with the VDC activated. With the track wet and cold without the VDC the rear would just come around and the car would spin out (I know, I tried it). With the VDC on it would intervene and keep the car from loosing the rear but would allow me to still swing out the rear and push the tires to their traction limits in the corners. I got to the point I was literally drifting the car through corners. Though the conditions were not ideal and I could not go as fast as I would have liked, it was a blast and I came to appreciate the VDC system and enjoyed experiencing a track day under those conditions.

That’s my story and I’m sticking to it.

theDreamer · 10-31-2010, 12:59 PM

Thanks OKC, added a link to your post by your name.

ThoriumHotdog · 10-31-2010, 01:22 PM

Nice review. Thanks OKC.

kevin8086 · 12-17-2010, 09:41 AM

isnt there more people then this?

roplusbee · 12-17-2010, 08:53 PM

I have a question for the finished F/I build guys. How soon are your cars in boost and when are the turbos at full boost? As far as I am concerned, response is king and full boost early is where the money is made. Let's here the stories...............

toner123 · 12-17-2010, 09:31 PM

Quote:

Originally Posted by roplusbee

I have a question for the finished F/I build guys. How soon are your cars in boost and when are the turbos at full boost? As far as I am concerned, response is king and full boost early is where the money is made. Let's here the stories...............

I would say by 4k I am at full bost on my low setting of 7.4 psi. Honestly i might be at full boost earlier. these turbo's spool fast.
Frank

Brazilbro · 12-17-2010, 09:37 PM

2009 6sp Sport
GTM Stage2
Berk test pipes with Greddy turbo CBE
450whp 365wtq
7psi
2000+ miles

Blue370tt · 12-18-2010, 10:25 AM

09 370z 7Spd AT

GTM TT Stage 2
9.5 psi
2000 miles since TT install
The Dawg Transmition Cooler
Z1 Oil Cooler
Uprev Orisis
Greddy Turbo Tic exhaust
front bumper mod to increase intercooler exposure
456 rwhp 380 TQ

09-13-2010, 09:44 PM	#34 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4211	Thanks OKC, added you. Shawa likes this. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

10-31-2010, 12:52 PM	#38 (permalink)
OKC370Z Base Member Join Date: Jul 2009 Location: Oklahoma City Posts: 46 Drives: 09 370Z Grey Rep Power: 16	I am posting this separately from the Stillen thread so it does not get lost in the hoopla. I want people to know that are some cars with the Stillen FI kit that have been working well with no real issues since day one and I have put about 3200 miles on this kit including one track day at Hallet Motor Speedway. My car is a 2009 A7 and the FI kit has been installed since September 1st. The kit was installed with about 6,800 miles on it by Chris Cartwright with Failsafe Performance in Tulsa, OK. The car was originally dyno’d prior to the FI install and produced 272 rwhp and 227 rwtq. Two weeks later after the install the car was dyno’d again on the same dyno under similar conditions and the car produced 389 rwhp and 290 rwtq. That’s a difference of 117 rwhp and 63 rwtq on 91 octane. The results may not be what Stillen advertised but drivability is excellent and the increase in performance is very noticeable. First gear is almost useless and second gear has major traction issues. I love swinging out the rear in second gear as I am going through a turn in a very nice controllable fashion and then accelerating out of the turn. The only noticeable issues are 1) when the motor is heat saturated and I stop the car and then get back in it, at times, it will not start without giving it a bit of throttle. At first I was like what the heck? But now that I am familiar with it I am prepared to give it a little throttle if it does not start right off as normal. It’s really not that big a deal now that I know what to expect and what to do. 2) When the temperatures dropped recently I started to experience some tip-in knock (detonation) when giving throttle under load. This happens mostly when at cruise and the trans is in a higher gear and the motor is in the lower rpm’s. To ensure I was experiencing knock I went to one of the few stations left in OKC that has 93 octane fuel, turns out that they had 101 octane for all the high end cars in the area (Porches, Lambos, Ferrari’s, etc.). I had half a tank of 91 octane in the car so I decided to fill up the 101 octane since the very next day I was participating in a track day. Once the fuel was mixed in, later that day I noticed a very noticeable increase in power across the board. I was surprised that increasing the octane would not only eliminate the tip-in knock but also increase the power as much as it did. I later found out talking to a friend of mine who was a Mercedes/Audi mechanic that Nissan’s VQ37 platform has a really nice knock sensing strategy that advances timing to maximize performance until knock is experienced and then adjusts accordingly. Wow! Is all I can say and now I try to fill up with the 93 octane (since the station is by my office) for the increased performance. Does the Stillen kit produce as promised and without any issues? Well, not entirely but, performance is a bit subjective based on dyno’s, conditions, octane fuel, etc. and quite frankly I am very happy with the performance and the drivability of the car. The issues I am experiencing are minor and easily dealt with. So, overall I am very pleased with the Stillen FI kit and I am very, very pleased with my 370Z overall. My experience at the track day a week ago today was awesome. Unfortunately the weather sucked and we experience rain most of the day. However, the first two sessions of the day were dry (though chilly/cold track) and I was able to easily hang with a supercharged Corvette Z06 putting down 650 rwhp. We both kept our VDC systems activated since track conditions were not ideal. I actually had fun and enjoyed learning to drive with the VDC activated. With the track wet and cold without the VDC the rear would just come around and the car would spin out (I know, I tried it). With the VDC on it would intervene and keep the car from loosing the rear but would allow me to still swing out the rear and push the tires to their traction limits in the corners. I got to the point I was literally drifting the car through corners. Though the conditions were not ideal and I could not go as fast as I would have liked, it was a blast and I came to appreciate the VDC system and enjoyed experiencing a track day under those conditions. That’s my story and I’m sticking to it. Last edited by OKC370Z; 11-16-2010 at 08:19 AM.

10-31-2010, 12:59 PM	#39 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4211	Thanks OKC, added a link to your post by your name. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

10-31-2010, 01:22 PM	#40 (permalink)
ThoriumHotdog A True Z Fanatic Join Date: Sep 2010 Location: TX Posts: 1,104 Drives: Turbo CRX si Rep Power: 17	Nice review. Thanks OKC. Chuy likes this.

12-17-2010, 08:53 PM	#42 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	I have a question for the finished F/I build guys. How soon are your cars in boost and when are the turbos at full boost? As far as I am concerned, response is king and full boost early is where the money is made. Let's here the stories............... __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

08-29-2010, 06:52 AM	#31 (permalink)
OKC370Z Base Member Join Date: Jul 2009 Location: Oklahoma City Posts: 46 Drives: 09 370Z Grey Rep Power: 16	Chart= Clendar, schedule, spread sheet. Something the tuner uses to schedule and keep track of scheduled dyno appointments. I have found most tuners are not very organized. The ones that are were smart enough to hire someone to come in and organize them and take care of the administartive functions.

09-02-2010, 01:07 AM	#32 (permalink)
B1nks Track Member Join Date: Apr 2009 Location: Houston,Tx Posts: 721 Drives: 2009 370Z Base 6MT Rep Power: 508	Hey dreamer pm me the tuner you're referring to and maybe I can help you out ! I'm also simply curious who is jerking you around.

09-13-2010, 09:42 PM	#33 (permalink)
OKC370Z Base Member Join Date: Jul 2009 Location: Oklahoma City Posts: 46 Drives: 09 370Z Grey Rep Power: 16	2009 370z w/7AT Stillen FI kit 389 HP / 290 TQ 8 psi 600 miles since install Also installed oil cooler and trans cooler. As soon as transgo kit is available I'll install one.

10-08-2010, 06:40 AM	#35 (permalink)
Seether13 Base Member Join Date: Sep 2010 Location: Jhb, South Africa Age: 49 Posts: 89 Drives: 09 Nissan 370Z M6 Rep Power: 15	Did anyone have to sacrifice anything in doing the FI conversions? Like aircon, etc.

12-17-2010, 09:41 AM	#41 (permalink)
kevin8086 Base Member Join Date: Oct 2010 Location: Austin Posts: 228 Drives: 09 370Z Sport Rep Power: 15	isnt there more people then this?

12-17-2010, 09:37 PM	#44 (permalink)
Brazilbro A True Z Fanatic Join Date: Mar 2009 Location: Indianapolis, IN Posts: 1,131 Drives: Juke/240Z Rep Power: 849	2009 6sp Sport GTM Stage2 Berk test pipes with Greddy turbo CBE 450whp 365wtq 7psi 2000+ miles __________________ Juke AWD/240Z SR20 08 Evo 10(Stage 2) SOLD Fastest Sport 6spd 370Z 11.8 @126.5SOLD

12-18-2010, 10:25 AM	#45 (permalink)
Blue370tt Enthusiast Member Join Date: Dec 2010 Location: Chattanooga TN Posts: 279 Drives: Nissan Juke Rep Power: 15	09 370z 7Spd AT GTM TT Stage 2 9.5 psi 2000 miles since TT install The Dawg Transmition Cooler Z1 Oil Cooler Uprev Orisis Greddy Turbo Tic exhaust front bumper mod to increase intercooler exposure 456 rwhp 380 TQ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 12:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 12:14 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 12:36 AM
Forced Induction gains and 7AT	kannibul	Forced Induction	18	10-14-2009 12:36 PM
Best trans for forced induction	madweazl	Engine & Drivetrain	24	08-07-2009 04:20 PM