Nissan 370Z Forum - Forced Induction Finished Builds

Page 26 of 59

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Forced Induction (http://www.the370z.com/forced-induction/)

- - Forced Induction Finished Builds (http://www.the370z.com/forced-induction/21711-forced-induction-finished-builds.html)

Chuck33079

01-09-2014 05:26 PM

Quote:

Originally Posted by V1H (Post 2643966)

Ok that clarifies things. Since test pipes replace cats, but I want to keep cats for emission pass, I cannot have downpipes then. or are they called "catted downpipes"?

All you would do is buy HFCs. Make sure they will hold up to the additional heat from the turbos.

V1H	01-09-2014 05:29 PM

Okidoki, thanks so much. Both of you rep'd :tiphat:
I hope any HFC: Berk, Erz, Stillen will be fine.

Ah, feel free to delete my questions. You answered them :-)

theDreamer

01-13-2014 10:31 AM

Have a new addition to the list with a Fast Intentions TT kit

Quote:

Originally Posted by nklear

Year: 2013
Kit Used: GT28RS
Current HP/Torque: 545RWH/487TQ
Gasoline: 91/100 Octane
Current PSI: 10.22
Miles Since Kit Installed: 500
Other Upgrades:

- 3" down Pipes in stainless steel recirculated wastegate tubes. (500 miles)
- GT28RS Turbochargers w/TiAL V-band .86 exhaust housings (500 miles)
- TiAL 38mm MV-S external wastegates (500 miles)
- TiAL Q 50mm Blow Of Valves (500 miles)
- FI Front Mount Air/Air intercooler (500 miles)
- AFE Advanced Flow Research Pro 5R (5 Layer) Air Filters (500 miles)
- Greddy large capacity baffled aluminum oil pan (500 miles)
- Bosch 650cc high impedance fuel injectors w/Denso plug and play wiring adapters. (500 Miles)
- Walbro 255 litres Per Hour (LPH) in tank pump. (500 miles)
- 3" cat back exhaust system with a non resonated x pipe, polished stainless steel mufflers & 4.5" tips. (500 Miles)
- Whiteline rear end (Polyurethane) differential bushings. (500 Miles)
- F.I. Oil Cooler Kit 34 row: Setrab Series 6 oil cooler, stainless steel braided lines. (500 miles)
- SZ Clutch & Flywheel Kit - 6 Puck Clutch, Flywheel, Slave. (500 miles) (SZ Clutch & Flywheel Kits for Z33 (07-08), Z34 & V36)
- HKS Spark Plugs (500 Miles)
- TurboSmart E Boost 2 Electronic Boost Controller. (500 Miles)
- Coilovers (3000 Miles)

Hotrodz

01-13-2014 09:10 PM

Hi Matt, all my components are the same except for the clutch, boost controller and coilovers. Coilovers and z1 2 piece brakes will be added this weekend!

theDreamer

01-14-2014 06:46 AM

Quote:

Originally Posted by Hotrodz (Post 2649787)

Hi Matt, all my components are the same except for the clutch, boost controller and coilovers. Coilovers and z1 2 piece brakes will be added this weekend!

Excellent, have a couple more people to add including you today.
This list is growing nicely the past few weeks.

theDreamer

01-14-2014 07:03 AM

Details for Hotrodz:

2010 Nismo 27,400 mi
Fast Intentions Twin Turbo Stage I Turn Key
484 whp 428 wtq
8.4 psi on 91 octane
Additional upgrade all done at the time of install:
Fast Intentions Twin Turbo Stage I Kit
Fast Intentions 3” Down Pipes
Fast Intentions 3” TT-TDX Exhaust
Fast Intentions 34 Row Oil Cooler
Specialty Z SZ Max Street Clutch & Flywheel
Blitz SPC i-D Spec-R Boast Controller
Whiteline Differential Bushing
Eibach Sway Bars
700 miles since install

http://i371.photobucket.com/albums/o...ps5632340a.jpg

theDreamer

01-14-2014 07:05 AM

Details for Perf.Des

2009
Stillen kit installed at 21000 miles
Current miles 25500
Psi: 9
HP: 419 whp
Valve train upgrade (Mines), Ark exhaust

Legz	01-14-2014 11:39 AM

I'll contribute,

2009 Infiniti G37X coupe 7AT
Kit installed at 20000km
Current: 22000km
GTM stage 2 TT @ 8.5 PSI
94 oct 10% ethanol
2.5" Exoticspeed Exhaust
3" GTM downpipe
48 row oil cooler
25 row trans cooler
2 steps colder HKS Sparkplugs
No Valve body, no tq converter, no clutch plates upgrades.
No dyno yet due to silly winter
Canadian @ 3900 ft altitude

Can also add to 7AT build list.

theDreamer

01-14-2014 12:42 PM

Quote:

Originally Posted by Legz (Post 2650867)

Excellent, another G and AWD at that.
One thing I am missing, HP & TQ numbers.

Tombonombona

01-31-2014 02:45 PM

Here is mine.
2012 370Z Sport Touring 6MT
GTM Stage 2 Supercharger Turnkey kit
Installed at 4000km
495 who and 364 wtq not sure of PSI
91 Octane
13x13x1.5 oil cooler
Exotic Speed R2 Titan catback

That is all, apart from wheels.

theDreamer

01-31-2014 02:53 PM

Quote:

Originally Posted by Tombonombona (Post 2674132)

Added! Thank you, and on the PSI you are probably around 10-12 based on other cars results.

Tombonombona

01-31-2014 02:55 PM

Quote:

Originally Posted by theDreamer (Post 2674143)

Added! Thank you, and on the PSI you are probably around 10-12 based on other cars results.

Sure haha. Whatever the kit came with for a pulley. I need to get around to putting in a gauge but there is no real aesthetic way of doing it.

faceglide

02-02-2014 01:58 AM

http://i371.photobucket.com/albums/o...ps4b6687c6.jpg

Faceglide: 632/589 @13PSI....lol

To quote Tony@F.I

FI Stage 1 TT Kit....
*GT2860RS
*FI 2.5" CBE...yes really 2.5"

Fuel system****e85***
*CJM full return system
*Walbro 485 fuel pump
*Bosch 1000cc injectors

Tuning
*UpRev by Sebastian@SpecialtyZ
*Turbosmart E Boost 2 boost controller
*Innovate fuel pressure gauge

Supporting mods
*SpecialtyZ "6 Puck" clutch/flywheel combo
*Whiteline urethane differential bushings
*FI 34 row oil cooler
*CSF competition radiator

theDreamer

02-17-2014 02:08 PM

neveucd:

2009 370z 7AT
GTM Stage 2 GT28RS
460HP & 370TQ
9.3PSI
A lot of miles
Valvebody, 25 row tranny cooler, 34 row oil cooler, CSF radiator, 900cc FIC injectors, stock engine

Realale

03-11-2014 04:02 PM

2012 370z Nismo
Stillen Supercharger
426/305
8 PSI
Installed by Stillen with 6000 miles on car
Miles on kit now 7000
Tuned by Seb at SpecialtyZ
http://i1004.photobucket.com/albums/...psev6pi9bh.jpg

All times are GMT -5. The time now is 12:15 AM.

Page 26 of 59

« First

Last »

Show 40 post(s) from this thread on one page