Forced Induction Finished Builds

elperuano · 11-19-2012, 08:35 PM

Looked over the thread and trying to see if anyone is running higher in torque on stock block than me?

conmam · 12-05-2012, 03:21 AM

Quote:

Originally Posted by blackbird

I've got the GTM Stage II. No internal modifications. I have, depending on the dyno, 512-540 RWHP, running at 10.5 boost. I have had no problems. Under WOT in 3rd gear is just hang on for dear life. Should be enough HP for mortals.

Hi... Power is killer, awesome. However, I am very concerned about possible driveability issues with any FI mods. Please let me know if the car runs reliable 100% as stock ( with much more power of course ). I hope for no erratic , rough idling during hot or cold temps, no bogging, no hard starting at any temps oe condition etc...... Thank you for answering.

theDreamer · 12-05-2012, 08:35 AM

Quote:

Originally Posted by conmam

Hi... Power is killer, awesome. However, I am very concerned about possible driveability issues with any FI mods. Please let me know if the car runs reliable 100% as stock ( with much more power of course ). I hope for no erratic , rough idling during hot or cold temps, no bogging, no hard starting at any temps oe condition etc...... Thank you for answering.

That is all going to come down to your tuner & how he tunes your car.

Mr&Mrs · 12-05-2012, 11:52 AM

My car is on a GTM canned tune and it runs like stock. Original owner had a hot start issue but Sam fixed it and sent the new tune to him, now no issues. It was a Northern car and is now in Florida temps/humidity. With that in mind it has had no issues to date.

Mr.Squeeze · 12-05-2012, 12:59 PM

Quote:

Originally Posted by elperuano

Well I'd like to add my name to the list

08 g37s
GTM stage 2 TT kit
GTM 3"DP
GTM 3" exhaust
534rwhp and 496 torque

The car is amazing now and it will plant your head on the headrest now.

Nice numbers man this is my first time seeing them

I would love to see the graph.

Quote:

Originally Posted by elperuano

Looked over the thread and trying to see if anyone is running higher in torque on stock block than me?

You have a tone of torque for stock block how many pounds of boost ?

elperuano · 12-05-2012, 01:10 PM

Quote:

Originally Posted by Mr.Squeeze

Nice numbers man this is my first time seeing them

I would love to see the graph.

You have a tone of torque for stock block how many pounds of boost ?

12 lbs

I have 2 maps, 10lbs and 12lbs but soon as I drove the car on the 12lb map there was no going back! I'll post graph when I get home tonite but I got it up on Facebook and Instagram. Instagram is LaUniversidad.
Car is a beast

Isamu · 12-05-2012, 01:19 PM

Quote:

Originally Posted by elperuano

12 lbs

I have 2 maps, 10lbs and 12lbs but soon as I drove the car on the 12lb map there was no going back! I'll post graph when I get home tonite but I got it up on Facebook and Instagram. Instagram is LaUniversidad.
Car is a beast

I made 520whp/403wtq at 8.65lbs.. when we turned it up to 10 to run it made 550whp/440wtq.. and that's using the stock NISMO exhaust...

elperuano · 12-05-2012, 01:20 PM

Think I got it to work thru my iphone

elperuano · 12-05-2012, 01:22 PM

Quote:

Originally Posted by Isamu

I made 520whp/403wtq at 8.65lbs.. when we turned it up to 10 to run it made 550whp/440wtq.. and that's using the stock NISMO exhaust...

Awesome numbers! I'm going to build before I start pushing more. I think I'm the highest torque TT'd on stock block

Isamu · 12-05-2012, 01:27 PM

Quote:

Originally Posted by elperuano

Awesome numbers! I'm going to build before I start pushing more. I think I'm the highest torque TT'd on stock block

nice. yea, I am looking at a built block.. going for drivable 700rwhp..

and dyno queen 1200...

elperuano · 12-05-2012, 01:45 PM

Quote:

Originally Posted by Isamu

nice. yea, I am looking at a built block.. going for drivable 700rwhp..

and dyno queen 1200...

Lol nice! Ur the SR kit right? Would be nice to see what that single turbo can really do! I'm aiming for around 700 also but I'm kind of stuck now on my turbos. I got the stage 2 Gtm TT kit and I haven't seen anyone push the gt28s anywhere past 12. I'm not sure at what psi they become inefficient. I'm at 12 and I think around 19 they start over spinning. So if I build my motor I might have to go stage 3 like Squeeze n that's more money ill have to spend. Wish someone had actual experience with the gt28s on this platform and not what the manufacturer "claims" it can handle.

Isamu · 12-05-2012, 01:54 PM

Quote:

Originally Posted by elperuano

Lol nice! Ur the SR kit right? Would be nice to see what that single turbo can really do! I'm aiming for around 700 also but I'm kind of stuck now on my turbos. I got the stage 2 Gtm TT kit and I haven't seen anyone push the gt28s anywhere past 12. I'm not sure at what psi they become inefficient. I'm at 12 and I think around 19 they start over spinning. So if I build my motor I might have to go stage 3 like Squeeze n that's more money ill have to spend. Wish someone had actual experience with the gt28s on this platform and not what the manufacturer "claims" it can handle.

the 6266 should be good for around 700.. but I am talking with Marti about doing something a little different.

elperuano · 12-05-2012, 01:56 PM

Yea ur gonna need a monster for 1200 lol! Good luck bro!

Isamu · 12-05-2012, 01:58 PM

Quote:

Originally Posted by elperuano

Yea ur gonna need a monster for 1200 lol! Good luck bro!

1200 is just like a dream.. lol just to say, yea, we made 1200.. lol

all I want is 700-750whp so I can go around real fast.. lol

elperuano · 12-05-2012, 02:12 PM

Quote:

Originally Posted by Isamu

1200 is just like a dream.. lol just to say, yea, we made 1200.. lol

all I want is 700-750whp so I can go around real fast.. lol

Lol! We made it!

Another 200 hp would be amazing, I'm having a helluva time tryna get what I have now to hook in 2nd and 3rd, at 700+ would be impossible!

12-05-2012, 11:52 AM	#229 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31940	My car is on a GTM canned tune and it runs like stock. Original owner had a hot start issue but Sam fixed it and sent the new tune to him, now no issues. It was a Northern car and is now in Florida temps/humidity. With that in mind it has had no issues to date. __________________ Project Z <--Click - Check out the link too many mods to list!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 01:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 01:14 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 01:36 AM
Forced Induction gains and 7AT	kannibul	Forced Induction	18	10-14-2009 01:36 PM
Best trans for forced induction	madweazl	Engine & Drivetrain	24	08-07-2009 05:20 PM

11-19-2012, 08:35 PM	#226 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Looked over the thread and trying to see if anyone is running higher in torque on stock block than me?

12-05-2012, 01:20 PM	#233 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Think I got it to work thru my iphone

12-05-2012, 01:56 PM	#238 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Yea ur gonna need a monster for 1200 lol! Good luck bro!