Nissan 370Z Forum - Forced Induction Finished Builds

Page 15 of 59

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Forced Induction (http://www.the370z.com/forced-induction/)

- - Forced Induction Finished Builds (http://www.the370z.com/forced-induction/21711-forced-induction-finished-builds.html)

theDreamer

10-08-2012 02:30 PM

Quote:

Originally Posted by blackbird (Post 1950104)

I've got the GTM Stage II. No internal modifications. I have, depending on the dyno, 512-540 RWHP, running at 10.5 boost. I have had no problems. Under WOT in 3rd gear is just hang on for dear life. Should be enough HP for mortals.

Added you, but can you give me some more info:
-Transmission
-Torque from your dyno runs

roplusbee

10-09-2012 12:49 PM

Quote:

Originally Posted by theDreamer (Post 1949103)

No, but the more info you put in here the better. You can always link to your dyno sheets in your post or to your own build thread.

Greddy 20G Twin Turbo kit here. Link to my thread (still waiting on my dyno sheets to make the final updated post): OmegaRED. Not sure were to post this, but I will post it here in my build thread, and in the "dyno" thread if I can find it.

http://www.the370z.com/members/roplu...dyno-uprev.jpg

blackbird

10-09-2012 02:13 PM

6MT. High 400s on Torque. Print outs lost in boxes somewhere (preparing to move) Didn't remember the numbers, was more interested in RWHP.

Beastz

10-20-2012 03:40 AM

Guys im after some info on the exhausts you are using on your twin turbo 370z, im in aus and just finished a twin turbo and 4.2L stroke build. Currently have a 2 1/4" setup and will obviously need to look at 3". Now Greddy Australia dont make them and Greddy USA will not send one internationally due to product codes or some ********.

Dembflyr

10-20-2012 09:34 AM

Check out Fast Intentions. They make a 3".

blackbird

10-21-2012 10:30 AM

Running with Stillen exhausts and Stillen HFCs.

tower74

10-28-2012 09:01 PM

1 Attachment(s)

Ok this should be my final numbers for this build. It will get a final tune in about a week...

2009 370z
AT7
945' above sea level
14,000 miles on the kit
Berk Test Pipes
STS Single Rear Mount Kit
I can take a pic of the whole page if you would like...

Best numbers: 481hp 427lb tq at 9psi
Test pipes were added about 300miles ago...due to the fact I burnt the cats up....

tower74

10-28-2012 09:19 PM

2 Attachment(s)

Full version...kinda if you tape it together:tup:

tturbo370z

10-29-2012 12:05 AM

Quote:

Originally Posted by tower74 (Post 1986613)

Congrats brother! Hope all turns out well.

tower74

10-29-2012 11:20 AM

Quote:

Originally Posted by tturbo370z (Post 1987001)

Congrats brother! Hope all turns out well.

You me both. It's been an almost 2 year nightmare. I guess good things do come to those who wait.

tturbo370z

10-29-2012 12:06 PM

Quote:

Originally Posted by tower74 (Post 1987408)

You me both. It's been an almost 2 year nightmare. I guess good things do come to those who wait.

Wow I am in a similar boat but only around 5mos. I hope that old saying is true for the both of us :tiphat: good luck and let us know how it turns out

theDreamer

10-30-2012 12:07 PM

Added, nice numbers. :tup:

theDreamer

11-19-2012 06:36 AM

Small update for one member: Baer383 - 2010 370z 7AT GTM Stage 1.5 SC at 11PSI - 515HP & 383TQ. All was done with just an adjusted tune, he was at 480HP & 350TQ

Mr&Mrs

11-19-2012 08:05 AM

He has a Nismo now also I think the 7AT needs to be changed.

theDreamer

11-19-2012 08:05 AM

Quote:

Originally Posted by Mr&Mrs (Post 2022721)

He has a Nismo now also I think the 7AT needs to be changed.

Naaaaaah.:stirthepot:

All times are GMT -5. The time now is 06:49 PM.

Page 15 of 59

« First

Last »

Show 40 post(s) from this thread on one page