Solved! Greddy Twin Turbo oil temps 220 on track

jayfightmoves

After a lot of money, blood, sweat and tears it looks like we have the oil temp issue managed. On a very hot 98deg day in Nashville we put the new cooling system to the test. I was able to run the entire 15gal fuel cell out without any drama. I have no doubt we will be able to manage up to 500whp on track with this system.

NASCAR heat exchange radiator
NASCAR air to oil cool
Remote oil filter
-10 oil lines
Custom fab shroud
Modified cooler arrangement
Modified bumper cover
14 quarts of oil !!!

This is the coolest the car has ever run. The Z sustained 260 oil temps before the turbos with 2 coolers, and limp mode with one. We knew going in that the biggest challenge for the Greddys would be the oil cooling. So this a huge step forward. Back to the fun stuff... Easing the boost up and sorting the chassis.

Ivoidwarranty

14 quarts? That's almost three times the stock amount. Congrats on the "cool" setup.

Red370

I want video!!!

__________________
2011 Mustang 5.0 | 3.55's | Lethal Performance off road H-Pipe | Magnaflow Muffler Delete | JLT CAI/Bama tuned 417whp/ 404 ft/lbs

jayfightmoves

I only have chase cam video.... and my laptop died with the track studio license... after I get some work done today I'll try to get it worked out.... files way too big to just post without editing

CrownR426

^^ Agreed.

__________________
Love + Hardwork + Passion
RIP SVTRacer

RCZ

pictures of the setup??

FuszNissan

x2

__________________
Mods: Too Many to list!
LouFuszNissan
ZDAYZ 2012

JB-370z

I wonder how much difference the temps would have been if they were water cooled as well. Love to see some pictures my friend.

__________________
ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll
GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

wifedrivenZ

I am at the point where I will need to work on keeping the oil cool. I would love more details. Thanks for donating "a lot of money, blood, sweat and tears " for this. All eyes are on you my friend. Keep up the good work. I too would love pictures.
Thanks

Valentino

+1

__________________
Lou Fusz Nissan | KW V3 | SPL rear camber and toe bolt | OS Giken LSD | Nismo Diff cover | Engine Oil cooler | F.I. TDX Cat Back 18" Resonators | F.I. Resonated Test Pipes | Injen cold air intake | COBB AccessPORT | JWT Clutch Flywheel |

jayfightmoves

We are cleaning up the install a little now, I,ll post some as is pics in the AM. My GFs on my *** now...

Also working on a solution for the street and light track use cars with AC. Should be a more DYI application. Will not offer quite the same level of performance as the full race set up, but allow the use of the factory condenser and radiator. For half the cost.

HKYStormFront

nice jay, this similar to bryan's black 350z setup?

__________________
Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs
09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

Valentino

+1 Rep.

Thanks

__________________
Lou Fusz Nissan | KW V3 | SPL rear camber and toe bolt | OS Giken LSD | Nismo Diff cover | Engine Oil cooler | F.I. TDX Cat Back 18" Resonators | F.I. Resonated Test Pipes | Injen cold air intake | COBB AccessPORT | JWT Clutch Flywheel |

jayfightmoves

Hey Patrick... I'm not familliar with his system. Maybe we can catch up at CMP or VIR in the next few weeks... You can get some good shoots of what we have going on. We are looking at how we are going to package this up now, to take all the guessing out of it. And... I still want to do a test at 10-11 psi boost. May still want to step the radiator up, before I would put my name on it!

HKYStormFront

still waiting to see the results from jeff from the Rd ATL shoot a few weeks ago...

__________________
Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs
09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now