GTM Performance Engineering VQ45VHR-Our Journey to The 1000 HP and Beyond

Vegitto-kun · 02-23-2011, 05:18 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

I will have to compile that list when I have time it really is stupid long!!! People do not realize this is a GTM car... lol it is no longer a Nissan! I have more aftermarket parts then I have OEM!!!!

I will be awaiting this epic list of epicly stuff.

Maybe I should take another suitcase or two with me to america and try shoving a TT kit in there

. or somehow get the money to ship my Z with me to america

KaienZ34 · 02-23-2011, 05:25 PM

Quote:

Originally Posted by Vegitto-kun

I will be awaiting this epic list of epicly stuff.

Maybe I should take another suitcase or two with me to america and try shoving a TT kit in there

. or somehow get the money to ship my Z with me to america

Just use the shrink ray.

Vegitto-kun · 02-23-2011, 05:28 PM

The release date of the shrink ray has been delayed again.

DIGItonium · 02-26-2011, 04:51 PM

Mike, how's the progress on your car? IIRC, last I heard was the fuel system was being put back in. Is the lower manifold the last piece of the puzzle before test running the engine?

JB-370z · 02-27-2011, 11:15 AM

Your ready for that GTR manifold DIGI!!! I love it too, I will have one under the hood as well.

b1adesofcha0s · 03-06-2011, 08:38 PM

Oh man, I literally spent all day reading all 82 pages of this this thread. Me + this thread today =

Bullitt, props to you on the build and everything you and GTM have put into it. Count me in as another person excited to see the results and the car in action.

Can not believe all the hate that I saw in this thread, it's ridiculous. If you have such a problem with it, then stay out of it. No need to periodically pop in and inject some hate into it.

DIGItonium · 03-07-2011, 07:58 PM

I'm probably one of those "yahoos" inquiring about updates.

Daniel, if you have interest or plans to get any of these products once it goes into production, more power to you. Otherwise, feel free to rant offsite if you don't have anything to bring to the table. Granted, I don't have much to contribute either, but I'm happy say that I have a VR38 intake collector and engine cover in hand ready for Baker this June.

Hopefully GTM can pull this off by June since this is all I need to complete the project. Plus, it'll be a fraction of the power Bullitt is making.

@Bullitt & GTM, have you heard anything from Rapid? Are they revising the drawings? Also, is the gasket thickness taken into consideration when designing the manifold?

Mike@GTM · 03-08-2011, 03:05 PM

Here's a quick update on the intake. It is still being revised and we are working to ensure everything on the prototype lines up this time around. Here's a couple quick pictures of the computer model as it is currently. Although the problem was very minor, once we started correcting the issues, we ended up having to do a lot more to the model. It is staggering how much time it takes to do this. Once you make a full 3D model, it is a royal PITA to fix something.

vipor · 03-08-2011, 06:47 PM

SPOHN · 03-09-2011, 09:30 AM

I know I missed something somewhere. Big thread here. So this is going to be the custom intake for a GTR plenum to fit?

DIGItonium · 03-09-2011, 09:41 AM

Quote:

Originally Posted by SPOHN

I know I missed something somewhere. Big thread here. So this is going to be the custom intake for a GTR plenum to fit?

It's a custom lower manifold to resolve fitment issues with the intake collector (plenum). The orientation of the runners are reversed, and the openings are round (versus square with ours). There are photos of my GTR intake plenum in the album, or you can backtrack a few pages of drama to get to my post.

bullitt5897 · 03-09-2011, 09:47 AM

Quote:

Originally Posted by DIGItonium

It's a custom lower manifold to resolve fitment issues with the intake collector (plenum). The orientation of the runners are reversed, and the openings are round (versus square with ours). There are photos of my GTR intake plenum in the album, or you can backtrack a few pages of drama to get to my post.

Basically yes! Thanks digi!

This is a conversion lower manifold to allow users to mount a VR38 Intake Plenum to their VQ style motors.

SPOHN · 03-09-2011, 09:49 AM

Quote:

Originally Posted by DIGItonium

It's a custom lower manifold to resolve fitment issues with the intake collector (plenum). The orientation of the runners are reversed, and the openings are round (versus square with ours). There are photos of my GTR intake plenum in the album, or you can backtrack a few pages of drama to get to my post.

Ok, thanks. I'll have to search later tonight. To much trouble on my iPhone.

88fc3sw/hx83 · 03-09-2011, 10:40 AM

Uh, why didn't you guys just use GTR heads?

bullitt5897 · 03-09-2011, 10:45 AM

Quote:

Originally Posted by 88fc3sw/hx83

Uh, why didn't you guys just use GTR heads?

The point of this was to push VVEL and to make a VQ37 or now VQ45 motor with VVEL break 1000rwhp. GTR heads are not needed and an unnecessary expense...

02-26-2011, 04:51 PM	#1219 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Mike, how's the progress on your car? IIRC, last I heard was the fuel system was being put back in. Is the lower manifold the last piece of the puzzle before test running the engine? __________________

02-27-2011, 11:15 AM	#1220 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Your ready for that GTR manifold DIGI!!! I love it too, I will have one under the hood as well. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

03-06-2011, 08:38 PM	#1221 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Oh man, I literally spent all day reading all 82 pages of this this thread. Me + this thread today = Bullitt, props to you on the build and everything you and GTM have put into it. Count me in as another person excited to see the results and the car in action. Can not believe all the hate that I saw in this thread, it's ridiculous. If you have such a problem with it, then stay out of it. No need to periodically pop in and inject some hate into it. __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

03-07-2011, 07:58 PM	#1222 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Enough is enough... I'm probably one of those "yahoos" inquiring about updates. Daniel, if you have interest or plans to get any of these products once it goes into production, more power to you. Otherwise, feel free to rant offsite if you don't have anything to bring to the table. Granted, I don't have much to contribute either, but I'm happy say that I have a VR38 intake collector and engine cover in hand ready for Baker this June. Hopefully GTM can pull this off by June since this is all I need to complete the project. Plus, it'll be a fraction of the power Bullitt is making. @Bullitt & GTM, have you heard anything from Rapid? Are they revising the drawings? Also, is the gasket thickness taken into consideration when designing the manifold? __________________

03-08-2011, 06:47 PM	#1224 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	__________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

02-23-2011, 05:28 PM	#1218 (permalink)
Vegitto-kun A True Z Fanatic Join Date: Feb 2010 Location: USA Posts: 2,011 Drives: 09 370Z Rep Power: 262	The release date of the shrink ray has been delayed again.

03-08-2011, 03:05 PM	#1223 (permalink)
Mike@GTM Not an active Vendor. DO NOT BUY Join Date: Sep 2009 Location: California Posts: 391 Drives: '13 Hot Lava FR-S Rep Power: 17	Here's a quick update on the intake. It is still being revised and we are working to ensure everything on the prototype lines up this time around. Here's a couple quick pictures of the computer model as it is currently. Although the problem was very minor, once we started correcting the issues, we ended up having to do a lot more to the model. It is staggering how much time it takes to do this. Once you make a full 3D model, it is a royal PITA to fix something.

03-09-2011, 09:30 AM	#1225 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I know I missed something somewhere. Big thread here. So this is going to be the custom intake for a GTR plenum to fit? __________________

03-09-2011, 10:40 AM	#1229 (permalink)
88fc3sw/hx83 Base Member Join Date: Sep 2010 Location: USA Posts: 18 Drives: R35 Rep Power: 15	Uh, why didn't you guys just use GTR heads?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 09:21 PM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.	SAM@GTM	Forced Induction	254	08-11-2010 11:59 AM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 01:07 AM