Nissan 370Z Forum
Page 33 of 106 « First 233132 33 34354383 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   GTM Performance Engineering VQ45VHR-Our Journey to The 1000 HP and Beyond (http://www.the370z.com/forced-induction/20809-gtm-performance-engineering-vq45vhr-our-journey-1000-hp-beyond.html)

G37Sam 09-22-2010 05:06 AM
Quote:
Originally Posted by shumby (Post 731354)
I am so calling you wheni get homne. i got a ew things to run by ya.
I never knew you spoke Russian :roflpuke2:

shumby 09-22-2010 05:56 AM
lol. i am typing on a russian keyboard had to get the letters right all the time.

DIGItonium 09-22-2010 07:09 AM
Quote:
Originally Posted by SAM@GTM (Post 731335)
Yes we will offer an upgraded strut bar to work with the GTR manifold. As for oil changes, nothing spacial that you will have to do beside taking the plastic cover to get to the engine fill cap .

Sam
Ah... :tup: How about the throttle bodies? Is the GT-R one in place temporarily for fitment purpose?

fstrnldr 09-22-2010 09:36 AM
i believe the throttle bodies are the same ... just inverted on the VR engine vs the VQ.

Horses pushes 09-22-2010 11:56 AM
Quote:
Originally Posted by spearfish25 (Post 586321)
Are we talking about building a car or sending a man to Mars? :)
sending a man to Mars. and in this case we need 8 point harness :driving:

JB-370z 09-22-2010 12:16 PM
Quote:
Originally Posted by DIGItonium (Post 731405)
Ah... :tup: How about the throttle bodies? Is the GT-R one in place temporarily for fitment purpose?
Dont think you will get this info for a hott minute sir. I would like to know also.

SAM@GTM 09-22-2010 01:12 PM
Those are the 370Z throttle body in that pic, they bolt right up to the GTR manifold.

Sam

Nixlimited 09-22-2010 01:15 PM
Quote:
Originally Posted by SAM@GTM (Post 731010)
Here is Some teaser pics of the GTR manifold, this was a big undertaken to say the least.

Sam
Can you share any flow-bench results?

Jamaica 09-22-2010 01:36 PM
How much?

DIGItonium 09-22-2010 04:23 PM
Quote:
Originally Posted by SAM@GTM (Post 731944)
Those are the 370Z throttle body in that pic, they bolt right up to the GTR manifold.

Sam
Sweet! :excited: I'm guessing the VR38 engine cover can be cut to clear the oil cap. Thanks again for your hard work. I'm definitely looking forward to the next few months to get the VR38 manifold and GTM Stage 1 kit installed.

WarmAndSCSI 09-22-2010 04:55 PM
No sure why you'd want the cover... that's a pretty manifold if you polish or powdercoat it!

JB-370z 09-22-2010 05:51 PM
Cannot get over how sexy these things are........I will get the GTR mani. for sure.

bullitt5897 09-28-2010 05:59 PM
Just saw the car today... Omg it's sexy!

JB-370z 09-28-2010 07:12 PM
Quote:
Originally Posted by SAM@GTM (Post 731010)
Here is Some teaser pics of the GTR manifold, this was a big undertaken to say the least.

Sam

Sam told me how much time and effort went into making this work. I think it will all pay off because I know a bunch of people going to get em' when the production model comes into effect and I am one of those people. Thanks Bullitt for being the test subject. ;)
The thing I like anout these is if the silver is too boring for you, you can customize the color, even polish is possible. Not sure if Sam will offer custom options but the mani. is a work of art no matter how you look at it. :tiphat:

Edit: I would love to see a carbon mani. cover on that bad boy ;)


http://passwordjdm.com/images/products/2585_2.jpg

http://passwordjdm.com/images/products/2585_4.jpg

bullitt5897 09-28-2010 07:23 PM
You guys should see the lower manifold!!! It's a work of art!


All times are GMT -5. The time now is 01:51 AM.
Page 33 of 106 « First 233132 33 34354383 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2