GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.

SAM@GTM · 06-03-2010, 05:54 AM

We are please to announce the commencement of the in house installation for the GTM stage 1 turn key supercharger kit. This in house install appointment was set while back right after our press release of the kit. the date was set way further down the road so no matter what delays or challenges could come up, will have plenty of time to address them . will Murphy's law came in play and we did not plan on the Cast intake foundry to run behind schedule. Since our customer was coming from Canada and his vacation in California was planed around this install we felt obligated to keep the install date and some how find an alternative solution for the supercharge intake that we are still waiting on . Also by producing the intake peace in house while we are still waiting on the cast peace we cans start shipping thees kits out. So our team went to work and was able to reproduce the intake, it is still a very time consuming process and we are still trying to find a way to simplify it.

We have scheduled several installs in the next couple weeks so we can finalize our instructions and also this way we can create some good technical discussion about the product which will help answer any questions for those who will be attempting an DYI. So will be updating the whole proses from start to finish.

Here is our first car it is a 2009 infiniti g37 with the 7spd AT, the car had the flowing mods

-FI long tube headers
-FI Cat back exhaust
-Short Ram air intake

And it is getting the following

-GTM STAGE 1 SUPERCHARGER KIT (TURN KEY)
-GTM OIL COOLER
-GTM TRANS COOLER
-HKS CAMP II SYSTEM

Sam

Dyno graph before

Car on the dyno before

Pics of the car and some and the tear down

Vehicle Tear Down

Updated 06-3-2010

spearfish25 · 06-03-2010, 06:02 AM

Nice, very interested to see the results.

LiquidZ · 06-03-2010, 08:28 AM

I was just wondering about this this morning. I look forward to the progress.

Zat_Zuma · 06-03-2010, 08:40 AM

Ohhh I have SO many questions on what I see in the pictures alone

But I will be patient and wait till the fellow Albertan and Sam's shop gets the job done and presents the finished product to the forum.

In the words of my niece:

You Rock Sam!

Z eliminator · 06-03-2010, 08:47 AM

my Pc at work will not show the RWHP #'s or dyno results.
Could some body post the #'s for me.
thanks

Sam so you should be shipping mine soon ?
What is a Camp 11 System ?

Z eliminator.

Trese7en · 06-03-2010, 08:47 AM

In for results, also isn't 270hp/230tq seem a little low considering his mods?

John@Z1 · 06-03-2010, 08:56 AM

Dang! In for results.

Z eliminator · 06-03-2010, 09:00 AM

My base line was between 260 to 265 rwhp (sae) bone stock on my 370z 7 AT.
after I added the stillen headers, berk cats, Stillen G 3 and a pulley change it made 310 Sae or 320.1 actual RWHP.

theDreamer · 06-03-2010, 09:10 AM

In for more, car looks good.

bullitt5897 · 06-03-2010, 09:55 AM

Awesome SAM!!! Cant wait to see the progress!

JB-370z · 06-03-2010, 10:01 AM

Can't wait to see what yall do with this car Sam. Looking at the time of the post, you must feel like a zombie.

OMG37 · 06-03-2010, 10:27 AM

Quote:

Originally Posted by Z eliminator

What is a Camp 11 System ?

Try googling what he posted and you'll get your question answered.

OMG37 · 06-03-2010, 10:28 AM

I see the BEAST in a couple of those pictures!

JB-370z · 06-03-2010, 10:31 AM

Quote:

Originally Posted by Z eliminator

my Pc at work will not show the RWHP #'s or dyno results.
Could some body post the #'s for me.
thanks

Sam so you should be shipping mine soon ?
What is a Camp 11 System ?

Z eliminator.

Here: HKS USA CAMP2 (more)
I have one and I recomend them for sure. Sam got em in stock all day long.

docaam · 06-03-2010, 10:49 AM

subscribing

06-03-2010, 05:54 AM	#1 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 18	GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation. We are please to announce the commencement of the in house installation for the GTM stage 1 turn key supercharger kit. This in house install appointment was set while back right after our press release of the kit. the date was set way further down the road so no matter what delays or challenges could come up, will have plenty of time to address them . will Murphy's law came in play and we did not plan on the Cast intake foundry to run behind schedule. Since our customer was coming from Canada and his vacation in California was planed around this install we felt obligated to keep the install date and some how find an alternative solution for the supercharge intake that we are still waiting on . Also by producing the intake peace in house while we are still waiting on the cast peace we cans start shipping thees kits out. So our team went to work and was able to reproduce the intake, it is still a very time consuming process and we are still trying to find a way to simplify it. We have scheduled several installs in the next couple weeks so we can finalize our instructions and also this way we can create some good technical discussion about the product which will help answer any questions for those who will be attempting an DYI. So will be updating the whole proses from start to finish. Here is our first car it is a 2009 infiniti g37 with the 7spd AT, the car had the flowing mods -FI long tube headers -FI Cat back exhaust -Short Ram air intake And it is getting the following -GTM STAGE 1 SUPERCHARGER KIT (TURN KEY) -GTM OIL COOLER -GTM TRANS COOLER -HKS CAMP II SYSTEM Sam Dyno graph before Car on the dyno before Pics of the car and some and the tear down Vehicle Tear Down Updated 06-3-2010 Last edited by SAM@GTM; 06-06-2010 at 02:24 AM.

06-03-2010, 06:02 AM	#2 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Nice, very interested to see the results. __________________ 2013 Cadillac V-Wagon, RIP Z

06-03-2010, 08:28 AM	#3 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	I was just wondering about this this morning. I look forward to the progress. __________________

06-03-2010, 08:40 AM	#4 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Ohhh I have SO many questions on what I see in the pictures alone But I will be patient and wait till the fellow Albertan and Sam's shop gets the job done and presents the finished product to the forum. In the words of my niece: You Rock Sam! __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

06-03-2010, 08:47 AM	#5 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	my Pc at work will not show the RWHP #'s or dyno results. Could some body post the #'s for me. thanks Sam so you should be shipping mine soon ? What is a Camp 11 System ? Z eliminator. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

06-03-2010, 08:47 AM	#6 (permalink)
Trese7en Base Member Join Date: Dec 2009 Location: Oklahoma Posts: 38 Drives: '09 G37 Rep Power: 16	In for results, also isn't 270hp/230tq seem a little low considering his mods?

06-03-2010, 08:56 AM	#7 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	Dang! In for results. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

06-03-2010, 09:00 AM	#8 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	My base line was between 260 to 265 rwhp (sae) bone stock on my 370z 7 AT. after I added the stillen headers, berk cats, Stillen G 3 and a pulley change it made 310 Sae or 320.1 actual RWHP. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

06-03-2010, 09:10 AM	#9 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	In for more, car looks good. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

06-03-2010, 09:55 AM	#10 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Awesome SAM!!! Cant wait to see the progress! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-03-2010, 10:01 AM	#11 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Can't wait to see what yall do with this car Sam. Looking at the time of the post, you must feel like a zombie. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

06-03-2010, 10:28 AM	#13 (permalink)
OMG37 Base Member Join Date: Mar 2010 Location: Fort Worth, TX Posts: 119 Drives: 08 G37S 6MT Rep Power: 15	I see the BEAST in a couple of those pictures!

06-03-2010, 10:49 AM	#15 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 29	subscribing __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 09:21 PM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 01:07 AM
S & R PERFORMANCE Tampa, Florida OPEN HOUSE!!!!!	shezzzhot	South East Region	7	01-09-2010 03:55 AM
Forged Performance Dyno Day/Open House	XenChi	South East Region	7	04-24-2009 08:54 AM