STILLEN 370Z Supercharger System - Announcement!!!

Chris@FsP · 05-20-2010, 09:48 PM

Looks good Josh!

ZForce · 05-20-2010, 11:10 PM

Quote:

Originally Posted by fstrnldr

i find it interesting that a Nissan engineer would refer to it as a plastic intake manifold when every technical document i have read from Nissan regarding the intake refers to it as a nylon piece. Before someone points out that nylon IS plastic, i know this, however nylon is far stronger (especially the blend used in the auto industry) than your standard piece of plastic, and Nissan seem to go out of their way to point this out.

As far as GTM going far above 4 psi on the stock intake, don't forget GReddy, and i believe AAM have as well. i haven't heard of a failure yet, and the G37's have been boosted for a couple of years now. You can also look at other non Nissan vehicles that use the same Dupont technology for intakes as well as charge piping on a variety of factory engines, including turbo diesel engines.

Basically for anyone other than bullitt, and maybe a couple other insane folks looking for that kind of HP. i'm sure the factory nylon intake will not have issues. High boost, and high hp may be a different story.

Humm......always a first.

Bay Area Z meet (every friday)

Quote:

Originally Posted by AndyZ

Oh btw. My car goin to be droped to zcg today
got something wrong i guess. Smoking like hell
hopefuly not blown piston rings or something like that
no freakin cash in my poket to spend on the car anymore lol
im having decently hard time to live on now. Danm it

Kastley85891 · 05-21-2010, 10:28 AM

Kit pic is a winner

Chris_1 · 05-21-2010, 12:51 PM

I love the fact that the real little tidbits like the supercharger and bracket are done for you. This kit looks so simple to install, by someone decent with tools that it amazes me.

LiquidZ · 05-21-2010, 01:36 PM

This kit looks superb. I spy the new washer bottle. Question for you Stillen guys: how is the intake situated behind the bumper?

Kyle@STILLEN · 05-21-2010, 02:28 PM

Quote:

Originally Posted by LiquidZ

This kit looks superb. I spy the new washer bottle. Question for you Stillen guys: how is the intake situated behind the bumper?

Thanks! Actually that is the overflow bottle for the radiator, we do not need to relocate the washer bottle.

I just went out and snapped a few pictures of the front of another one of the test cars. I'm processing that picture now so you will see the heat exchanger and the intakes. We are going through a third round of instruction checks right now on another vehicle. Now we have had multiple mechanics doing the installs, and verifying our instructions. Additionally, this new car is an out of state car so we are confirming that we are prepared for CA and out of state vehicle's, should there be any differences. You would be amazed at some of the tiny differences we've seen in the past that can cause big headaches!

So now we have the kit running on four different vehicle's...

Also, one thing that is not shown in this picture is the air filter shield. Just like on our G37 Gen. 3's we have made a hydro shield to protect the filters from water.

LiquidZ · 05-21-2010, 02:36 PM

Doh you are right! That isn't the washer bottle. Thanks for clarifying that as I had no idea where the overflow tank was.

Can't wait to see the pictures.

Kyle@STILLEN · 05-21-2010, 03:50 PM

Hopefully this picture shows up.

If you look to the left you will see the heat exchanger, look to the right, you will see the Y-pipe intake system.

LiquidZ · 05-21-2010, 04:53 PM

Thanks Kyle!

I thought I saw a filter poking through your bumper:

G Fo12ce · 05-21-2010, 10:45 PM

Quote:

Originally Posted by Kyle@STILLEN

Hopefully this picture shows up.

If you look to the left you will see the heat exchanger, look to the right, you will see the Y-pipe intake system.

Kyle, how are the MAF sensor harness/connecter plugs extended. Is it plug and play with new male/female connecoter plugs on an extension harness or is it cut & extend the stock?

fstrnldr · 05-22-2010, 12:25 AM

Quote:

Originally Posted by ZForce

Humm......always a first.

Bay Area Z meet (every friday)

So what does that have to do w/ the Nylon intake manifold? sorry i didn't read through the 20 pages, and honestly will try to skip most of the meet and "lifestyle" type posts because they are usually a bunch of internet slang, and abbreviations that i don't keep up with enough to understand anyway. lol

Rhett · 05-22-2010, 01:14 AM

Quote:

Originally Posted by LiquidZ

Thanks Kyle!

I thought I saw a filter poking through your bumper:

Did you attach metal screen to front bumper for protecting a/c condenser from road debris like a stone or something? Will you let me know what it is? My a/c condenser was damaged from a road debris. Now, I am searching for something to protect a/c condenser. Alluminum screen for window at Home depot is too weak.

Please!!!

travisjb · 05-22-2010, 02:42 AM

Security Mesh 12 Mesh Black Epoxy Stainless Steel T304.023 Wire Diameter 48 Inches Wide Screen 24 Gauge

TWP Part #: 012X012SP0230W48T

Black epoxy mesh stainless steel. When properly framed it is an excellent light security window and door screen (resists cans, bottles, rocks, BB's,and casual forced entry). This is one of the mesh specifications is approved by (Department of Housing and Urban Development). It cuts with very sturdy hand or machine shears.

RCZ · 05-22-2010, 09:55 AM

Thanks for that Travis!

whiddles · 05-22-2010, 12:42 PM

that what i may have to use on my 37 cause i cut my plastic for my show in go plate

05-21-2010, 10:28 AM	#603 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Kit pic is a winner __________________ Boosted V8 hunter 2850 lbs and 375WHP

05-21-2010, 01:36 PM	#605 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	This kit looks superb. I spy the new washer bottle. Question for you Stillen guys: how is the intake situated behind the bumper? __________________

05-21-2010, 02:36 PM	#607 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	Doh you are right! That isn't the washer bottle. Thanks for clarifying that as I had no idea where the overflow tank was. Can't wait to see the pictures. __________________

05-21-2010, 04:53 PM	#609 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	Thanks Kyle! I thought I saw a filter poking through your bumper: __________________

05-22-2010, 02:42 AM	#613 (permalink)
travisjb A True Z Fanatic Join Date: Jan 2009 Location: GSO Posts: 2,803 Drives: VIR Rep Power: 188	Security Mesh 12 Mesh Black Epoxy Stainless Steel T304.023 Wire Diameter 48 Inches Wide Screen 24 Gauge TWP Part #: 012X012SP0230W48T Black epoxy mesh stainless steel. When properly framed it is an excellent light security window and door screen (resists cans, bottles, rocks, BB's,and casual forced entry). This is one of the mesh specifications is approved by (Department of Housing and Urban Development). It cuts with very sturdy hand or machine shears. __________________ 2009 370Z #104 For Sale

05-20-2010, 09:48 PM	#601 (permalink)
Chris@FsP Enthusiast Member Join Date: Dec 2009 Location: Tulsa, OK Posts: 430 Drives: 2008 350Z TT Rep Power: 368	Looks good Josh!

05-21-2010, 12:51 PM	#604 (permalink)
Chris_1 Track Member Join Date: Mar 2010 Location: Statewide Posts: 838 Drives: Nissan 370Z Roadster Rep Power: 16	I love the fact that the real little tidbits like the supercharger and bracket are done for you. This kit looks so simple to install, by someone decent with tools that it amazes me.

05-22-2010, 09:55 AM	#614 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Thanks for that Travis!

05-22-2010, 12:42 PM	#615 (permalink)
whiddles Base Member Join Date: Mar 2010 Location: FT HOOD Posts: 219 Drives: G37S AB Rep Power: 15	that what i may have to use on my 37 cause i cut my plastic for my show in go plate

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: 370Z Supercharger system development	SAM@GTM	Forced Induction	1396	02-02-2014 11:54 PM
STILLEN 370Z Dual Exhaust System w/pricing	AK370Z	STILLEN	25	01-03-2011 08:49 PM
Preparation for the STILLEN supercharger	Kyle@STILLEN	Forced Induction	1087	03-13-2010 06:59 AM
Stillen Supercharger estimates???	NewYorkJon34	Forced Induction	454	01-23-2010 12:05 AM
Will Stillen Supercharger & G3 intakes Connect?	NewYorkJon34	Forced Induction	23	10-31-2009 01:09 AM