STILLEN 370Z Supercharger System - Announcement!!!

Zultimate · 03-18-2010, 05:25 PM

Quote:

Originally Posted by FailsafePerf

PM'd, I don't wanna derail this thread any more than I already have

Please PM me with the same info.

RCZ · 03-18-2010, 05:36 PM

Any pics of the kit installed with the hood closed and the new front fascia on? Those are the money shots I want to see

Kyle@STILLEN · 03-18-2010, 05:39 PM

So you want to see a picture of a Z with our fascia on it? LOL!

No, not yet. We're actually doing all of our testing with a stock fascia that we picked up from our good friends over at the Nissan proving grounds in Arizona. We wanted to do all of our durability testing with the stock fascia so that we could make sure airflow was sufficient for all cars, not just people with our fascia.

RCZ · 03-18-2010, 06:10 PM

lol basically yes, just want to see the new fascia with a shiny smile.

Red370 · 03-18-2010, 06:53 PM

Quote:

Originally Posted by Kyle@STILLEN

So you want to see a picture of a Z with our fascia on it? LOL!

No, not yet. We're actually doing all of our testing with a stock fascia that we picked up from our good friends over at the Nissan proving grounds in Arizona. We wanted to do all of our durability testing with the stock fascia so that we could make sure airflow was sufficient for all cars, not just people with our fascia.

Hey kyle, i posted a question about the fascia in the thread you guys started in the exterior section, is it in production yet? and has pricing been released? I need one ASAP.

Kyle@STILLEN · 03-18-2010, 07:27 PM

Quote:

Originally Posted by Red370

Hey kyle, i posted a question about the fascia in the thread you guys started in the exterior section, is it in production yet? and has pricing been released? I need one ASAP.

I am going to be finalizing the instructions tomorrow with one of our craftsmen. Then we will be able to finalize the pricing and everything for you guys.

stormcrow · 03-18-2010, 09:27 PM

Kyle - not to sound like a broken record, but any videos or sound clips of the blower at idle?

stormcrow · 03-18-2010, 09:36 PM

Quote:

Originally Posted by RCZ

Hey, having never owned a supercharged car before, I'm curious. How much parasitic drag does the SC hardware put on the revving speed of the motor? In other words, does it have a noticeable negative impact on the speed of the revs or not really?

You won't notice an impact on the quickness of revving through the power band. What you will notice is that the RPMs jump from mid-range to redline VERY quickly. Lower down in the RPM range, you won't experience lag, but you will feel a very slight 'bog'. At least, this was my experience with the Vortech blower. With the roots type blowers, I notice zero lag and no real difference in RPM building even up top.

Kyle@STILLEN · 03-19-2010, 12:24 AM

Quote:

Originally Posted by stormcrow

Kyle - not to sound like a broken record, but any videos or sound clips of the blower at idle?

Not yet. We're trying to stay out of the way of the engineer's. I should be able to take an idle video in the next week or two.

G35s-Q8 · 03-19-2010, 05:52 AM

I liked that box full of raw manifolds waiting to be finalized.

MMC Racing · 03-19-2010, 09:29 AM

Quote:

Originally Posted by stormcrow

You won't notice an impact on the quickness of revving through the power band. What you will notice is that the RPMs jump from mid-range to redline VERY quickly. Lower down in the RPM range, you won't experience lag, but you will feel a very slight 'bog'. At least, this was my experience with the Vortech blower. With the roots type blowers, I notice zero lag and no real difference in RPM building even up top.

Easy to make a roots blower drop off high also - just push it beyond its efficiency range. I pushed the old M112 to its limits and beyond years ago before swapping to a Kenne Bell.

stormcrow · 03-19-2010, 09:47 AM

Quote:

Originally Posted by Kyle@STILLEN

Not yet. We're trying to stay out of the way of the engineer's. I should be able to take an idle video in the next week or two.

Thanks, sir. Though, I'm sure you've been able to hear it. Does the V3 still have the rattle that the other Vortech blowers had? Not that this is a bad thing, I used to actually find the 'rocks in a blender' sound endearing. Others, not so much.

stormcrow · 03-19-2010, 09:50 AM

Quote:

Originally Posted by MMC Racing

Easy to make a roots blower drop off high also - just push it beyond its efficiency range. I pushed the old M112 to its limits and beyond years ago before swapping to a Kenne Bell.

The only experience I have with the roots is with the Stillen SC kit on the Pathfinder. I don't think the blower was out of its efficiency range up top, but I could be wrong. The Pathfinder didn't have a high RPM redline, so it shifted around 6k. I just didn't notice it jetting the RPMs from 4500-6000 nearly as quickly as the Vortech blower did on my G35. Maybe the TVS was running out of steam up there? :shrugs:

Mike · 03-19-2010, 10:26 AM

Quote:

Originally Posted by stormcrow

Thanks, sir. Though, I'm sure you've been able to hear it. Does the V3 still have the rattle that the other Vortech blowers had? Not that this is a bad thing, I used to actually find the 'rocks in a blender' sound endearing. Others, not so much.

I had a V2 on my corvette and it was near silent at idle.

stormcrow · 03-19-2010, 11:18 AM

Quote:

Originally Posted by Mike

I had a V2 on my corvette and it was near silent at idle.

If the V3 uses the same gearing, then it should be as silent. I actually liked how Brando's and my chargers sounded. It wasn't obnoxious to me. Others didn't share my same sentiment, though. I haven't been able to hear the new internally lubricated versions, so I am interested.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: 370Z Supercharger system development	SAM@GTM	Forced Induction	1396	02-02-2014 11:54 PM
STILLEN 370Z Dual Exhaust System w/pricing	AK370Z	STILLEN	25	01-03-2011 08:49 PM
Preparation for the STILLEN supercharger	Kyle@STILLEN	Forced Induction	1087	03-13-2010 06:59 AM
Stillen Supercharger estimates???	NewYorkJon34	Forced Induction	454	01-23-2010 12:05 AM
Will Stillen Supercharger & G3 intakes Connect?	NewYorkJon34	Forced Induction	23	10-31-2009 01:09 AM

03-18-2010, 05:36 PM	#182 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Any pics of the kit installed with the hood closed and the new front fascia on? Those are the money shots I want to see

03-18-2010, 05:39 PM	#183 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 306	So you want to see a picture of a Z with our fascia on it? LOL! No, not yet. We're actually doing all of our testing with a stock fascia that we picked up from our good friends over at the Nissan proving grounds in Arizona. We wanted to do all of our durability testing with the stock fascia so that we could make sure airflow was sufficient for all cars, not just people with our fascia.

03-18-2010, 06:10 PM	#184 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	lol basically yes, just want to see the new fascia with a shiny smile.

03-18-2010, 09:27 PM	#187 (permalink)
stormcrow Enthusiast Member Join Date: Jan 2010 Location: Alpharetta, GA Posts: 267 Drives: 2010 370Z Nismo TT Rep Power: 15	Kyle - not to sound like a broken record, but any videos or sound clips of the blower at idle?

03-19-2010, 05:52 AM	#190 (permalink)
G35s-Q8 Base Member Join Date: Mar 2010 Location: Kuwait Posts: 20 Drives: 08 G35 Sedan Rep Power: 15	I liked that box full of raw manifolds waiting to be finalized.