GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE

toner123 · 11-26-2010, 05:03 PM

hey don't hold me to the accuracy of that just relaying what that said. my Buddy had the magazine at work and I just gave it a quick read through. Also that article doesn't mean they plan to come out with one in the future it was discussing the original development before they released the 370.
Frank

Zsteve · 11-26-2010, 05:05 PM

Quote:

Originally Posted by toner123

Well the artical reads that they were not planning on making the GTR yet they were going to hold it back. Also that the original 370z was to be TT like the 300zx. Well they decided to release the GTR and thats when are car plans went to **** and we got the 3.7. They didn't mention what engine they were going to use, but all it stated was when they decided to release the gtr, they decided to use the 3.7 ans the powerplant.
Frank

A TT Z would be fun and fast if they keep the 3.7 or 3.8 engine. When did they say this might happen? Im looking for a faster car now and am on the fence with the vette or maybe the Audi TT RS (if its under 55K). If not then prolly the vette.

toner123 · 11-26-2010, 05:07 PM

Quote:

Originally Posted by Zsteve

A TT Z would be fun and fast if they keep the 3.7 or 3.8 engine. When did they say this might happen? Im looking for a faster car now and am on the fence with the vette or maybe the Audi TT RS (if its under 55K). If not then prolly the vette.

read my post above yours i must have typed it while you were typing yours lol. also put a TT kit on there steve don't sell for a vette. Trust me man, everyone on this forum by now should know i am a straight shooter and you will not regret doing it.
Frank

Zsteve · 11-26-2010, 05:51 PM

Quote:

Originally Posted by toner123

read my post above yours i must have typed it while you were typing yours lol. also put a TT kit on there steve don't sell for a vette. Trust me man, everyone on this forum by now should know i am a straight shooter and you will not regret doing it.
Frank

Im in el paso and can open a vette up on a regular basis on roads here and when Im used too 400 HP and 400 TQ I can SC it and have fun all over again. I just dont trust the auto tranny on the Z right now.

toner123 · 11-26-2010, 05:54 PM

Quote:

Originally Posted by Zsteve

Im in el paso and can open a vette up on a regular basis on roads here and when Im used too 400 HP and 400 TQ I can SC it and have fun all over again. I just dont trust the auto tranny on the Z right now.

I think everyone is looking into shumbys tranny failing a little to hard. Maybe sam can comment on that. I guess i can see the cause though since he has been the longest on a 7 at s/c. I would wait till sam gets his tranny before making a decision like that
Frank

efuseakay · 11-27-2010, 11:38 AM

Quote:

Originally Posted by One_Quick_Z

Why yes I was

Only white 370Z there

DAN

Nice. So I did see your car. I was the only silver G37 sedan there. Not that anyone ever notices it... lol

JB-370z · 11-27-2010, 11:50 AM

Quote:

Originally Posted by Zsteve

Im in el paso and can open a vette up on a regular basis on roads here and when Im used too 400 HP and 400 TQ I can SC it and have fun all over again. I just dont trust the auto tranny on the Z right now.

After Sam is done with the AT Trans. you can bet it will be bullitt proof!

Z eliminator · 11-27-2010, 12:10 PM

Hopefully Sam will have my VB ready soon. The torque converter should be ready in my car with in a few weeks. It has a 3200 rpm stall. This should improve my 1/4 mile times.
My tranny shifts well but Sam says that with his VB it will shift even better.
I would my hold my breath on a fully build transmion from GTM till some time next year. R & D takes a long time and Sam will not release it till he tests it.
I feel with the VB. converter and his tranney cooler it should be ok as long as you do not hammer it 6th or 7th gear.
Can not wait to see how it works with my stage 2 SC and my 4.08 gears. (some time next year if im lucky) He is still waiting for the SC from rotex.
With my bolts on's the car is really quick especially after i installed the m370 intake in 1st and 2nd gear.
Z

shumby · 11-27-2010, 12:21 PM

ya guys my trans fail because of my driving style. i am a hwy way driver and I hammer on it in the upper gears. I was warned by Sam about this and i knew it might be an issue. Sam will have my trans for as long as he wants it for R&D. I am in no hurry to get it back. Time line could be in any ball park and Sam will not know anything more until he sees my trans.

Oh and elim. na na na na na na I have had my SC first. ha.

Z eliminator · 11-27-2010, 12:27 PM

My dear Canadian cousin

4.5 stroker with stage 2 Sc and fully built tranny with 4.08 gears.

Its worth the wait.

Zzzzzzzz you.

sinceday1 · 11-27-2010, 06:31 PM

theDreamer, any updates on the updated parts?

theDreamer · 12-04-2010, 03:11 PM

Got the updated piece and Baker Tuning has it.
Scheduling a time to get it on and back on a dyno.

sinceday1 · 12-04-2010, 07:24 PM

tkfracing · 12-06-2010, 01:17 AM

Hi,SAM I need advice from you. After I installed Supercharger kit gear system problems. It can not accommodate the increased capacity. In your web parts to customize the architecture I equation. To support the customization engine I want to know that I will be able to order or not. The details are as follows.
1. Valve Body upgrade GTM RE5R01A-HP or Transgo Valvebody upgrade kit RE5R05A-HD2.
2. Direct clutch power pack GTM RE5R05A.
I will be able to order what response with

Thank you
Tam tkf

SAM@GTM · 12-06-2010, 04:25 AM

Quote:

Originally Posted by tkfracing

Hi,SAM I need advice from you. After I installed Supercharger kit gear system problems. It can not accommodate the increased capacity. In your web parts to customize the architecture I equation. To support the customization engine I want to know that I will be able to order or not. The details are as follows.
1. Valve Body upgrade GTM RE5R01A-HP or Transgo Valvebody upgrade kit RE5R05A-HD2.
2. Direct clutch power pack GTM RE5R05A.
I will be able to order what response with

Thank you
Tam tkf

You can order all these parts on line, here is the link GTM Motorsports*::*Search results

or shoot an e mail to sam@gtmpower.com

Sam

11-27-2010, 12:10 PM	#983 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Hopefully Sam will have my VB ready soon. The torque converter should be ready in my car with in a few weeks. It has a 3200 rpm stall. This should improve my 1/4 mile times. My tranny shifts well but Sam says that with his VB it will shift even better. I would my hold my breath on a fully build transmion from GTM till some time next year. R & D takes a long time and Sam will not release it till he tests it. I feel with the VB. converter and his tranney cooler it should be ok as long as you do not hammer it 6th or 7th gear. Can not wait to see how it works with my stage 2 SC and my 4.08 gears. (some time next year if im lucky) He is still waiting for the SC from rotex. With my bolts on's the car is really quick especially after i installed the m370 intake in 1st and 2nd gear. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 11-27-2010 at 12:14 PM.

11-27-2010, 12:21 PM	#984 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 236	ya guys my trans fail because of my driving style. i am a hwy way driver and I hammer on it in the upper gears. I was warned by Sam about this and i knew it might be an issue. Sam will have my trans for as long as he wants it for R&D. I am in no hurry to get it back. Time line could be in any ball park and Sam will not know anything more until he sees my trans. Oh and elim. na na na na na na I have had my SC first. ha. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

11-27-2010, 12:27 PM	#985 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	My dear Canadian cousin 4.5 stroker with stage 2 Sc and fully built tranny with 4.08 gears. Its worth the wait. Zzzzzzzz you. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

12-04-2010, 03:11 PM	#987 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Got the updated piece and Baker Tuning has it. Scheduling a time to get it on and back on a dyno. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

12-06-2010, 01:17 AM	#989 (permalink)
tkfracing Base Member Join Date: Aug 2010 Location: Bangkok Posts: 25 Drives: 09 nissan 370z white Rep Power: 15 $tkfracing is on a distinguished road$	Hi,SAM I need advice from you. After I installed Supercharger kit gear system problems. It can not accommodate the increased capacity. In your web parts to customize the architecture I equation. To support the customization engine I want to know that I will be able to order or not. The details are as follows. 1. Valve Body upgrade GTM RE5R01A-HP or Transgo Valvebody upgrade kit RE5R05A-HD2. 2. Direct clutch power pack GTM RE5R05A. I will be able to order what response with Thank you Tam tkf
$tkfracing is offline$

11-26-2010, 05:03 PM	#976 (permalink)
toner123 Track Member Join Date: May 2010 Location: chesapeake va Age: 39 Posts: 823 Drives: TT 370z Touring/SP Rep Power: 16	hey don't hold me to the accuracy of that just relaying what that said. my Buddy had the magazine at work and I just gave it a quick read through. Also that article doesn't mean they plan to come out with one in the future it was discussing the original development before they released the 370. Frank

11-27-2010, 06:31 PM	#986 (permalink)
sinceday1 Track Member Join Date: Oct 2009 Location: Canada Posts: 514 Drives: 09 Nissan 370Z M6 Rep Power: 17	theDreamer, any updates on the updated parts?

12-04-2010, 07:24 PM	#988 (permalink)
sinceday1 Track Member Join Date: Oct 2009 Location: Canada Posts: 514 Drives: 09 Nissan 370Z M6 Rep Power: 17

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Press Release Photos: Advan RG-D and Advan RZ-DF Wheels	DriveLineEric	Wheels & Tires	29	10-14-2011 01:36 PM
MXP Performance - S/S Catback Exhaust Press Release	DriveLineEric	Intake/Exhaust	30	05-18-2010 01:09 PM
Nissan 370Z UK Press Release Document - PRICING AND GRADES	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-13-2009 12:55 AM
Nissan Press Release on Pricing on 2009 370Z 12/30/08	Pushing_Tin	Nissan 370Z Pricing / Ordering Discussions	53	01-02-2009 03:32 PM