GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE

shumby · 05-10-2010, 01:59 PM

Sam doing your install? when?. before mine? If so i'll have to look you up wheni am down there and take a look at your ride

LUVZTTZ · 05-10-2010, 02:51 PM

Is anyone putting in a lighter flywheel along with their new clutch during the SC install? Seems like a good time to do it, but I'm not sure if there are any pitfalls...

Zsteve · 05-10-2010, 04:14 PM

Quote:

Originally Posted by shumby

Stage zero up to 450 HP (carb approval pending)
Stage one up to 500 HP
Stage two up to 525 HP
Stage three up to 550 HP

so are the stage 2 and up available now while the stage 1 is waiting on approval? And the only diff between 1 and 2 besides the number 1, is a bigger SC? All other parts are the same?

Zsteve · 05-10-2010, 04:26 PM

Sam will there be any chance of these two parts vibrating against each other? Or any other parts?

rbosacco · 05-10-2010, 05:34 PM

i'm doing a jwt flywheel and clutch kit, gtm external oil cooler, gtm test pipes, jwt oil pan spacer, drilled/slotted rotors, hawk pads, stainless lines and rbf600 fluid all at the same time. sam i tried calling today, when are the kits gonna ship? 09 nismo z from va here

SAM@GTM · 05-10-2010, 06:23 PM

Quote:

Originally Posted by Zsteve

Sam will there be any chance of these two parts vibrating against each other? Or any other parts?

These two parts are held together by four different bolts, three on the back
and one toward the front, they are very secured. So vibrating against each other is not possible.

Sam

jmlenz · 05-11-2010, 01:57 AM

Still no dyno on the supercharger kit + aftermarket exhaust? If I pull the trigger on this kit Im curious as to the numbers I'd be putting down...I'm currently running FI RTPs + FI CBE.

SAM@GTM · 05-11-2010, 03:26 AM

Quote:

Originally Posted by jmlenz

Still no dyno on the supercharger kit + aftermarket exhaust? If I pull the trigger on this kit Im curious as to the numbers I'd be putting down...I'm currently running FI RTPs + FI CBE.

How about 460 RWHP 360 RWTQ . where have you been ?

Sam

shumby · 05-11-2010, 04:20 AM

Quote:

Originally Posted by Zsteve

so are the stage 2 and up available now while the stage 1 is waiting on approval? And the only diff between 1 and 2 besides the number 1, is a bigger SC? All other parts are the same?

yes all other parts are the same. The SC is not really bigger. it has the same footprint just different internals.

JB-370z · 05-11-2010, 11:32 AM

How does the SC change the note of the exhaust?? Or does it change it at all?? If I were not so intent on going turbo I would pick one of these bad boys up quick. And at that price they are practicly giving them away for free!

Would it be possible to put some sort of BOV on this SC kit? It almost sounds like there is one on there now. Every time there is a gear shift is sounds amazing.

Chris@FsP · 05-11-2010, 12:00 PM

Quote:

Originally Posted by JB-370z

How does the SC change the note of the exhaust?? Or does it change it at all?? If I were not so intent on going turbo I would pick one of these bad boys up quick. And at that price they are practicly giving them away for free!

Would it be possible to put some sort of BOV on this SC kit? It almost sounds like there is one on there now. Every time there is a gear shift is sounds amazing.

It really shouldn't effect the exhaust note at all. There isn't a turbine in the middle of the exhaust path as there is with a turbo setup

RCZ · 05-11-2010, 12:33 PM

^ but you are pumping out a lot more air than you were before.

LiquidZ · 05-11-2010, 12:35 PM

Quote:

Originally Posted by RCZ

^ but you are pumping out a lot more air than you were before.

Yeah, the Stillen exhaust sounded way throaty with the
supercharger installed.

Zsteve · 05-11-2010, 03:23 PM

So I have asked Stillen for this and I am asking GTM about this too. What are the before IC temps compared to the post IC temps? How much of a drop between the two? The effectiveness of the IC is important to my decision as to which kit to get, among other factors of course. Thanks.

de_dust · 05-11-2010, 06:40 PM

Quote:

Originally Posted by Zsteve

So I have asked Stillen for this and I am asking GTM about this too. What are the before IC temps compared to the post IC temps? How much of a drop between the two? The effectiveness of the IC is important to my decision as to which kit to get, among other factors of course. Thanks.

i've googled this concern before... essentially you have to consider the difference between the air to air cooler of GTM and Stillen's water to air cooler to decide which would be more effective for your use...

check out these links... or google "air to air vs liquid to air intercooler" .. Bell Intercoolers - Technology and FAQs or ProCharger Intercooling

essentially most everyone would say air to air is more effective for daily use... the only time a liquid to air IC kit would be more effective is if they have installed a huge enough heat exchanger to cool the liquid (but with that thought, ull have additional weight) or use unicorn blood as coolant... thats why i still dont understand why ppl have placed deposits for the stillen kit w/o seeing or getting more info on this particular part of their kit..

05-10-2010, 01:59 PM	#526 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 236	Sam doing your install? when?. before mine? If so i'll have to look you up wheni am down there and take a look at your ride __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

05-10-2010, 02:51 PM	#527 (permalink)
LUVZTTZ Base Member Join Date: Apr 2009 Location: St Louis, MO Posts: 57 Drives: Black 91 TT Rep Power: 16	Lightened Flywheel Is anyone putting in a lighter flywheel along with their new clutch during the SC install? Seems like a good time to do it, but I'm not sure if there are any pitfalls...

05-11-2010, 11:32 AM	#535 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	How does the SC change the note of the exhaust?? Or does it change it at all?? If I were not so intent on going turbo I would pick one of these bad boys up quick. And at that price they are practicly giving them away for free! Would it be possible to put some sort of BOV on this SC kit? It almost sounds like there is one on there now. Every time there is a gear shift is sounds amazing. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

05-11-2010, 03:23 PM	#539 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	So I have asked Stillen for this and I am asking GTM about this too. What are the before IC temps compared to the post IC temps? How much of a drop between the two? The effectiveness of the IC is important to my decision as to which kit to get, among other factors of course. Thanks. __________________ 2010 LS3 C6 Silver coupe corvette

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Press Release Photos: Advan RG-D and Advan RZ-DF Wheels	DriveLineEric	Wheels & Tires	29	10-14-2011 01:36 PM
MXP Performance - S/S Catback Exhaust Press Release	DriveLineEric	Intake/Exhaust	30	05-18-2010 01:09 PM
Nissan 370Z UK Press Release Document - PRICING AND GRADES	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-13-2009 12:55 AM
Nissan Press Release on Pricing on 2009 370Z 12/30/08	Pushing_Tin	Nissan 370Z Pricing / Ordering Discussions	53	01-02-2009 03:32 PM

05-10-2010, 05:34 PM	#530 (permalink)
rbosacco Base Member Join Date: Apr 2010 Location: va Posts: 9 Drives: 97 awd rb26 240 Rep Power: 15	i'm doing a jwt flywheel and clutch kit, gtm external oil cooler, gtm test pipes, jwt oil pan spacer, drilled/slotted rotors, hawk pads, stainless lines and rbf600 fluid all at the same time. sam i tried calling today, when are the kits gonna ship? 09 nismo z from va here

05-11-2010, 01:57 AM	#532 (permalink)
jmlenz Track Member Join Date: May 2009 Location: San Diego Posts: 645 Drives: a car Rep Power: 643	Still no dyno on the supercharger kit + aftermarket exhaust? If I pull the trigger on this kit Im curious as to the numbers I'd be putting down...I'm currently running FI RTPs + FI CBE.

05-11-2010, 12:33 PM	#537 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	^ but you are pumping out a lot more air than you were before.