GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE

rednek01 · 05-03-2010, 04:41 PM

Quote:

Originally Posted by Red370

I have a feeling that there will be a HP increase with a decrease in TQ, always happens when the airflow is opened up too much.

You do realize that LTH's are a supporting mod and will only help both HP and TQ in a forced induction situation.

Besides F.I.'s LTH's have been shown to create more TQ than stock. Look up scavenging just a quick site I found

Autolounge.net | Tech | Exhaust

It really depends on how the headers are tuned. You have to remember that an engine is simply an air compressor, the more air you can feed it and get out of it the more power it will make.

CGMobile370Z · 05-03-2010, 05:50 PM

Quote:

Originally Posted by SAM@GTM

We are still running 8 Psi boost as you can see in the video. Lowering the pulley 4mm did put the blower at max efficiency. So between Improving the exhaust flow and a smaller pulley the car made very good improvement, The process of doing this was slow and very time consuming it it was very rewarding at the end as you can see .

Sam

Sam you kicka**, taking it to the next level!

LiquidZ · 05-03-2010, 08:24 PM

I just watched the video again at a better resolution. I definitely don't see that needle climbing above 8 psi. Thanks for the clarification Sam.

I really like telemetry you are including in these videos. Keep up the good work!

SAM@GTM · 05-03-2010, 11:20 PM

Quote:

Originally Posted by LiquidZ

I just watched the video again at a better resolution. I definitely don't see that needle climbing above 8 psi. Thanks for the clarification Sam.

I really like telemetry you are including in these videos. Keep up the good work!

We are still working on couple more videos, This is only the beginning.

Sam

Zsteve · 05-05-2010, 12:38 AM

so Sam have you done any 0 60 or 1/4 mile times yet?

SAM@GTM · 05-05-2010, 11:52 AM

Quote:

Originally Posted by Zsteve

so Sam have you done any 0 60 or 1/4 mile times yet?

Yes,We have a lot more data to share and we will post it up real soon.

Sam

shumby · 05-05-2010, 12:14 PM

woot.

Zat_Zuma · 05-05-2010, 12:17 PM

I heard that Russia is going to block car sites for corrupting their youth and oil field workers not paying attention to there panels

Any update on the BP failure?
I'm curious why the safety protocols failed. i.e. blow out valves

shumby · 05-05-2010, 12:19 PM

^^^ i'll pm ya

370z4Steve · 05-05-2010, 04:37 PM

Quote:

Originally Posted by SAM@GTM

We are still working on couple more videos, This is only the beginning.

Sam

Hurry SAM

lets see TT or SC now? SC looking very promising to me..

SAM@GTM · 05-07-2010, 06:06 AM

Quote:

Originally Posted by 370z4Steve

Hurry SAM

lets see TT or SC now? SC looking very promising to me..

Here we go, Fresh off the press..

Sam

shumby · 05-07-2010, 07:10 AM

you are up early Sam. I will comment after i load up the vid. that will take me 3 hrs or so here on the rig. FCUK slow interwebs

Zat_Zuma · 05-07-2010, 08:23 AM

Had a quick look for the answer to my question, but couldn't find it.

I see that the windshield washer container is removed from the passenger side and I`m wondering if it`s moved to somewhere else, replaced with another smaller container or removed completly

Besides that, it`s looking good Sam

shumby · 05-07-2010, 08:56 AM

^^^ can you give me the cliff notes on the vid. Zat? It is not loading here in russia. Stillen must have an in with the russian mob and are blocking it.

theDreamer · 05-07-2010, 09:27 AM

Quote:

Originally Posted by shumby

^^^ can you give me the cliff notes on the vid. Zat? It is not loading here in russia. Stillen must have an in with the russian mob and are blocking it.

Some music with mostly pictures we have seen and some clips of the car on the dyno and driving around on the street (which I think some of which we have seen).
Looks like a good "promo" video, but does show a good bit of what the kit can do.

05-03-2010, 08:24 PM	#483 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	I just watched the video again at a better resolution. I definitely don't see that needle climbing above 8 psi. Thanks for the clarification Sam. I really like telemetry you are including in these videos. Keep up the good work! __________________

05-05-2010, 12:38 AM	#485 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 22	so Sam have you done any 0 60 or 1/4 mile times yet? __________________ 2010 LS3 C6 Silver coupe corvette

05-05-2010, 12:14 PM	#487 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 237	woot. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

05-05-2010, 12:17 PM	#488 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	I heard that Russia is going to block car sites for corrupting their youth and oil field workers not paying attention to there panels Any update on the BP failure? I'm curious why the safety protocols failed. i.e. blow out valves __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

05-05-2010, 12:19 PM	#489 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 237	^^^ i'll pm ya __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

05-07-2010, 07:10 AM	#492 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 237	you are up early Sam. I will comment after i load up the vid. that will take me 3 hrs or so here on the rig. FCUK slow interwebs __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

05-07-2010, 08:23 AM	#493 (permalink)
Zat_Zuma A True Z Fanatic Join Date: Nov 2008 Location: Edmonton, Alberta ...eh Posts: 1,171 Drives: 2017 Touring auto Rep Power: 19	Had a quick look for the answer to my question, but couldn't find it. I see that the windshield washer container is removed from the passenger side and I`m wondering if it`s moved to somewhere else, replaced with another smaller container or removed completly Besides that, it`s looking good Sam __________________ [B]2009 & 2017 370Z Touring Sport Autos SOLD

05-07-2010, 08:56 AM	#494 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 237	^^^ can you give me the cliff notes on the vid. Zat? It is not loading here in russia. Stillen must have an in with the russian mob and are blocking it. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Press Release Photos: Advan RG-D and Advan RZ-DF Wheels	DriveLineEric	Wheels & Tires	29	10-14-2011 01:36 PM
MXP Performance - S/S Catback Exhaust Press Release	DriveLineEric	Intake/Exhaust	30	05-18-2010 01:09 PM
Nissan 370Z UK Press Release Document - PRICING AND GRADES	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-13-2009 12:55 AM
Nissan Press Release on Pricing on 2009 370Z 12/30/08	Pushing_Tin	Nissan 370Z Pricing / Ordering Discussions	53	01-02-2009 03:32 PM