GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE

MMC Racing · 03-03-2010, 01:09 PM

To the MPG question, when we put the Vortech kit on our 350z, we lost about 2 MPG in normal 60 mile per day commuting.. This was the standard 1/4 side streets and 3/4 stop and go highway traffic.

SAM@GTM · 03-03-2010, 01:15 PM

Quote:

Originally Posted by MMC Racing

$200/hr is the standard shop rate?

Our shop rate is 129 per hour here is the brake down .

-Super charger install time 11 hours

-Fuel system 3 hours

-Dyno time befor and after 2 hours

That is a total of 16 hours. hope this make sense

Sam

shumby · 03-03-2010, 01:18 PM

sam still waiting to hear from you. if the lead time is 30-60 days i got to get on this.

SAM@GTM · 03-03-2010, 01:31 PM

Quote:

Originally Posted by shumby

sam still waiting to hear from you. if the lead time is 30-60 days i got to get on this.

Pm sent.

Sam

shumby · 03-03-2010, 01:44 PM

PM sent back awaiting your email

nixxer · 03-03-2010, 01:52 PM

Quote:

Originally Posted by SAM@GTM

Millage is related to how aggressive you drive you car, so for example if you are the type that like bouncing off the rev limiter all the time you MPG will be effected greatly. On the other hand if you can stay off the boost your gas millage will be the same or better. below is you factory ecu air fuel ratio target map as you can see the 14.7 cell is where the ecu will target that to get you the best MGP so it does not mater whether you have a twin turbo or a super charger kit the ecu does not care , You will still get a good MGP providing you drive the car decent most of the time and also providing your car is tuned correctly. So for a daily driver car you will be just fine .

Sam

Hope I'm not the only one who doesn't understand this chart. Can someone explain how to interpret this?

209Z · 03-03-2010, 02:04 PM

Sold I want it. Pm me sam when you have the chance.

live2themaxuk · 03-03-2010, 03:04 PM

Sam

Great work.

Will this fit Right Hand Drive cars to you think? Are there going to be any major obstacles in regards to fitment? Im sure there will be alot of ppl in the UK/Auz/japan who would be interested in this

regards

Jamie

SAM@GTM · 03-03-2010, 03:20 PM

Quote:

Originally Posted by live2themaxuk

Sam

Great work.

Will this fit Right Hand Drive cars to you think? Are there going to be any major obstacles in regards to fitment? Im sure there will be alot of ppl in the UK/Auz/japan who would be interested in this

regards

Jamie

We have dealt with that in our turbo kit so we know all bout it, so yes Our supercharger kit will fit on a right hand drive car

Sam

Kastley85891 · 03-03-2010, 03:21 PM

Quote:

Originally Posted by hngonzalez

Hope I'm not the only one who doesn't understand this chart. Can someone explain how to interpret this?

Engine rpm right hand column
Injector latency/ engine load / etc etc (which ever software you are using ) - top row
Cross ref fuel targets - down and right 14:7.1 = 1 Lambda (leaner) 11:5.1 = richer.
ECU uses front o2 sensor in closed loop to adjust fuel trims to make target, generally ECU's will have switch over points from closed loop to open loop , usually open loop will be the meatier fueled/higher load areas of the map.
Generally you will run leaner fuel, obviously for idle, partial throttle, cruise loads etc, then have a smooth transition in high load areas to make best power safely, tuners usually throw a little more fuel in at higher rpm on higher load cells to help with knock retention.

Basic but should help.

I beleive the Z fueling algorithm is more of a CL system for all, from my experience it seems to hit target pretty well.

Heres an edit from my turbo charged E85 running vehicles fuel map, this one uses rpm and direct engine load for cell target fueling, hope this makes things clearer, this ECU did have a deddicated switch point from CL to OL fueling.

Heres is stock rom in COBB format for the Z, this is Lambda based not AFR , same theory though.

Back on track - Sam that install rate and timeline is very resonable, seems like a real sound product here. good job

SAM@GTM · 03-03-2010, 04:59 PM

To make the process a little easier we added the supercharge kit to our website with the giving the option to chose between black or blue couplers, powder coating the piping and Thermo coating on the intercooler

Here is a link

GTM Motorsports*::*FORCED INDUCTION*::*Supercharger Kits*::*GTM 370Z SUPERCHARGER KIT

and some pics of the piping and the intercooler coating

Sam

209Z · 03-03-2010, 05:03 PM

mmm black powdercoated piping is what I want =].

MMC Racing · 03-03-2010, 05:26 PM

Quote:

Originally Posted by SAM@GTM

Our shop rate is 129 per hour here is the brake down .

-Super charger install time 11 hours

-Fuel system 3 hours

-Dyno time befor and after 2 hours

That is a total of 16 hours. hope this make sense

Sam

As a gauge to compare against, what time do you quote to install a full Vortech kit on a 350z?

Buddy Revell · 03-03-2010, 05:32 PM

Quote:

Originally Posted by 209Z

mmm black powdercoated piping is what I want =].

Agreed. The black piping looks sick.

LiquidZ · 03-03-2010, 05:49 PM

What's the benefit of putting a thermal coating on your intercooler? I thought the point of thermal coating was to keep the heat in, hence why people put them on turbo components and headers. Wouldn't that negate the purpose of having an intercooler (heat exchanger)?

Is this a different type of coating?

03-03-2010, 01:18 PM	#138 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 237	sam still waiting to hear from you. if the lead time is 30-60 days i got to get on this. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

03-03-2010, 01:44 PM	#140 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 44 Posts: 6,288 Drives: your sister Rep Power: 237	PM sent back awaiting your email __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

03-03-2010, 02:04 PM	#142 (permalink)
209Z A True Z Fanatic Join Date: Mar 2009 Location: Stockton, Cali (209) Posts: 1,058 Drives: 09 370z Rep Power: 278	Sold I want it. Pm me sam when you have the chance. __________________ Team Blur My Build Thread Fast Intentions\|KWS\|BERK\|Carbon Fiber Element\| SEIBON\|Memphis Car Audio\| Status Autoworks\|Lusso Forged\|Autohaus\|PWJDM\|SPC

03-03-2010, 05:03 PM	#147 (permalink)
209Z A True Z Fanatic Join Date: Mar 2009 Location: Stockton, Cali (209) Posts: 1,058 Drives: 09 370z Rep Power: 278	mmm black powdercoated piping is what I want =]. __________________ Team Blur My Build Thread Fast Intentions\|KWS\|BERK\|Carbon Fiber Element\| SEIBON\|Memphis Car Audio\| Status Autoworks\|Lusso Forged\|Autohaus\|PWJDM\|SPC

03-03-2010, 05:49 PM	#150 (permalink)
LiquidZ A True Z Fanatic Join Date: Nov 2008 Location: Columbus, OH Posts: 1,940 Drives: Mag. Black 2009 370Z Rep Power: 705	What's the benefit of putting a thermal coating on your intercooler? I thought the point of thermal coating was to keep the heat in, hence why people put them on turbo components and headers. Wouldn't that negate the purpose of having an intercooler (heat exchanger)? Is this a different type of coating? __________________

03-03-2010, 01:09 PM	#136 (permalink)
MMC Racing Track Member Join Date: Jun 2009 Location: San Diego Posts: 661 Drives: 2015 GT-R Rep Power: 17	To the MPG question, when we put the Vortech kit on our 350z, we lost about 2 MPG in normal 60 mile per day commuting.. This was the standard 1/4 side streets and 3/4 stop and go highway traffic.

03-03-2010, 03:04 PM	#143 (permalink)
live2themaxuk Base Member Join Date: Mar 2010 Location: UK Posts: 6 Drives: 350z Rep Power: 15	Sam Great work. Will this fit Right Hand Drive cars to you think? Are there going to be any major obstacles in regards to fitment? Im sure there will be alot of ppl in the UK/Auz/japan who would be interested in this regards Jamie

03-03-2010, 04:59 PM	#146 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 18	To make the process a little easier we added the supercharge kit to our website with the giving the option to chose between black or blue couplers, powder coating the piping and Thermo coating on the intercooler Here is a link GTM Motorsports::FORCED INDUCTION::Supercharger Kits::GTM 370Z SUPERCHARGER KIT and some pics of the piping and the intercooler coating Sam

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Press Release Photos: Advan RG-D and Advan RZ-DF Wheels	DriveLineEric	Wheels & Tires	29	10-14-2011 01:36 PM
MXP Performance - S/S Catback Exhaust Press Release	DriveLineEric	Intake/Exhaust	30	05-18-2010 01:09 PM
Nissan 370Z UK Press Release Document - PRICING AND GRADES	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-13-2009 12:55 AM
Nissan Press Release on Pricing on 2009 370Z 12/30/08	Pushing_Tin	Nissan 370Z Pricing / Ordering Discussions	53	01-02-2009 03:32 PM