NOS question

jake1e

Hey I have a build which I have just a simple question.
I'm trying to build a dry nirours system for my z and I was wondering what line/connector type connects to a 1/16npt nozzle which all nitrous systems have. I couldn't fine anything on the line types that commercial systems comes with and it's important for to do it myself...
So any info would be a big help

2011 base Z | custom test pipes, stillen gen3, custom catch cans, LOVIN' IT

__________________
2011 base Z | custom test pipes, stillen gen3, custom catch cans, Tein S-Tech springs, Whitle F sway bar, LOVIN' IT

SG4247

All of the fittings on my system are -3AN or -4AN.

The main line from the nitrous bottle is -4AN all the rest are -3AN.

__________________
NA on E85 - 12.402 @ 112 mph
100 shot E85 - 11.589 @ 117 mph
JWT C2 cams rev Base Circle & Titan Valves

jake1e

But I was wondering what line should I get to run from the selenoid to the nozzle itself is it the -3AN then? Just cause the nozzles are usually 1/16npt so the numbers are confusing

2011 base Z | custom test pipes, stillen gen3, custom catch cans, LOVIN' IT

__________________
2011 base Z | custom test pipes, stillen gen3, custom catch cans, Tein S-Tech springs, Whitle F sway bar, LOVIN' IT

SG4247

Common size for the injector threads is 1/8” NPT.

Then the line to the injectors is usually-3AN.

Hope that helps.

__________________
NA on E85 - 12.402 @ 112 mph
100 shot E85 - 11.589 @ 117 mph
JWT C2 cams rev Base Circle & Titan Valves