Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Aftermarket Injector O-rings Question (http://www.the370z.com/forced-induction/138696-aftermarket-injector-o-rings-question.html)

Averying 03-19-2023 08:02 PM
Aftermarket Injector O-rings Question
 
I’m wondering if OEM injector O-rings fit on my aftermarket injectors. Do OEM seals typically fit the aftermarket injectors for our cars?

I’ve got a set of Denso 600cc injectors from my GTM Stage 1 supercharger kit. Pretty sure these are the blue (sorta teal color) Deatschwerks/Denso 600cc injectors that also came with the Stillen kit but I can’t confirm.


Sent from my iPhone using Tapatalk

NorthStyle 03-20-2023 03:56 AM
I assume you're purchasing new OEM and not reusing, yes? But, since the injectors were made to fit the same fuel rail, there's a good chance the OEM o-rings should fit. Still, I'd check with the manufacturer to be 100% sure unless you have one of each laying around to compare.

Averying 03-20-2023 05:14 AM
Quote:
Originally Posted by NorthStyle (Post 4036488)
I assume you're purchasing new OEM and not reusing, yes? But, since the injectors were made to fit the same fuel rail, there's a good chance the OEM o-rings should fit. Still, I'd check with the manufacturer to be 100% sure unless you have one of each laying around to compare.

Correct id get new OEM seals. I thought about reusing the seals that are currently installed on these injectors since they seem like they’re in good shape (~25k miles, ~12 years installed), but it seems like cheap insurance to just replace them with new while I’ve got everything apart


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 10:46 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2