Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Just put down 8000 $$$ to FI for the twin turb0 (http://www.the370z.com/forced-induction/138131-just-put-down-8000-fi-twin-turb0.html)

chendaxian888 08-26-2022 02:28 PM

Just put down 8000 $$$ to FI for the twin turb0
 
after this decision, the way to the hell has started. I am getting 1000cc and 450 fuel from FI also, CJM fuel return and fuel rail. gonna let my machinc put on and let dynosity tune it after like may be 0.7 year

the most problem for me is what boost controller should I use?
Do I have to run a boost controller or our ECU can just handle it?
FI reconmand Turbosmart Eboost2

chendaxian888 08-26-2022 02:30 PM

what ohter additional part should I put on together?

cooltoy 08-26-2022 03:21 PM

I recommend posting in the proper forum. You will probably get more answers.


Forced Induction - Nissan 370Z Forum

redondoaveb 08-26-2022 04:52 PM

Quote:

Originally Posted by chendaxian888 (Post 4029132)
after this decision, the way to the hell has started. I am getting 1000cc and 450 fuel from FI also, CJM fuel return and fuel rail. gonna let my machinc put on and let dynosity tune it after like may be 0.7 year

the most problem for me is what boost controller should I use?
Do I have to run a boost controller or our ECU can just handle it?
FI reconmand Turbosmart Eboost2

I control boost on mine through Ecutek

And cooltoy is right

Spooler 08-26-2022 07:57 PM

Dynosty aka Hal, is a good tuner. They do good work as far as I have ever heard. Do boost by gear in Ecuteck. No need for a boost controller, just a MAC valve.

Trips 08-26-2022 10:05 PM

Quote:

Originally Posted by cooltoy (Post 4029134)
I recommend posting in the proper forum. You will probably get more answers.


Forced Induction - Nissan 370Z Forum

I moved it and Thank You! cooltoy :tiphat:


Op never pays attention where he posts and I always move his threads so he can be spoon fed.

Back on Topic!

Rusty 08-26-2022 10:07 PM

Quote:

Originally Posted by Trips (Post 4029155)
I moved it and Thank You! cooltoy :tiphat:


Op never pays attention where he posts and I always move his threads so he can be spoon fed.

Back on Topic!

:rofl2:

Dreadnaught 08-27-2022 12:32 AM

Cocaine is a hell of a drug...

chendaxian888 08-27-2022 09:11 PM

Quote:

Originally Posted by Trips (Post 4029155)
I moved it and Thank You! cooltoy :tiphat:


Op never pays attention where he posts and I always move his threads so he can be spoon fed.

Back on Topic!

ok ty

chendaxian888 08-27-2022 09:12 PM

Quote:

Originally Posted by Dreadnaught (Post 4029162)
Cocaine is a hell of a drug...

and power is the way to the hell of 200mph

chendaxian888 08-27-2022 09:13 PM

Quote:

Originally Posted by redondoaveb (Post 4029139)
I control boost on mine through Ecutek

And cooltoy is right

what additionl part you need to put on if you control boost through ecuteck?

chendaxian888 08-27-2022 09:13 PM

Quote:

Originally Posted by Spooler (Post 4029144)
Dynosty aka Hal, is a good tuner. They do good work as far as I have ever heard. Do boost by gear in Ecuteck. No need for a boost controller, just a MAC valve.

what type or specific brand of MAC valve is the best for me?

Rusty 08-27-2022 09:30 PM

Quote:

Originally Posted by chendaxian888 (Post 4029199)
and power is the way to the hell of 200mph

200 mph in your dreams.

NorthStyle 08-27-2022 11:04 PM

Quote:

Originally Posted by chendaxian888 (Post 4029133)
what ohter additional part should I put on together?

Quote:

Originally Posted by chendaxian888 (Post 4029200)
what additionl part you need to put on if you control boost through ecuteck?

Quote:

Originally Posted by chendaxian888 (Post 4029201)
what type or specific brand of MAC valve is the best for me?

If Hal is tuning your car, speak with him about what your plans are and type of use for your vehicle and go with what he recommends.

Elmo370z 08-28-2022 04:31 AM

Quote:

Originally Posted by Rusty (Post 4029202)
200 mph in your dreams.

Lol, you better worry about how to keep one of the worse platforms reliable.

cv129 08-28-2022 11:37 AM

Quote:

Originally Posted by chendaxian888 (Post 4029199)
and power is the way to the hell of 200mph

Don’t appear in the local news, dead or alive.

Rusty 08-28-2022 01:20 PM

Quote:

Originally Posted by cv129 (Post 4029221)
Don’t appear in the local news, dead or alive.

Yeah.....it does......the "Obit" section. Under "Dead Motors".

cv129 08-28-2022 05:27 PM

Quote:

Originally Posted by cv129 (Post 4029221)
Don’t appear in the local news, dead or alive.

Quote:

Originally Posted by Rusty (Post 4029231)
Yeah.....it does......the "Obit" section. Under "Dead Motors".

Well in that case, appear alone, if he must.

chendaxian888 08-28-2022 10:05 PM

Quote:

Originally Posted by Elmo370z (Post 4029209)
Lol, you better worry about how to keep one of the worse platforms reliable.

just prove our car is very stable in 160 cruse

Elmo370z 08-28-2022 11:50 PM

Quote:

Originally Posted by chendaxian888 (Post 4029251)
just prove our car is very stable in 160 cruse

Lol. You must have very little knowledge on what it takes to reach 200mph. Those baby turbos aren’t the answer.

Rusty 08-29-2022 03:44 AM

Quote:

Originally Posted by Elmo370z (Post 4029254)
Lol. You must have very little knowledge on what it takes to reach 200mph. Those baby turbos aren’t the answer.

What stage?

cooltoy 08-29-2022 10:20 AM

Quote:

Originally Posted by NorthStyle (Post 4029205)
If Hal is tuning your car, speak with him about what your plans are and type of use for your vehicle and go with what he recommends.




End of thread.

Elmo370z 08-29-2022 12:49 PM

Quote:

Originally Posted by Rusty (Post 4029262)
What stage?

Trillion

OptionZero 08-29-2022 01:42 PM

the more Z's this guy blows up on the way to "200mph" the higher the value of our non-blown up cars, i guess?

chendaxian888 08-29-2022 06:11 PM

Quote:

Originally Posted by Rusty (Post 4029262)
What stage?

stage 1 but i beileve that for me right now the limit is engine not turbo or exhaust,and my diff is 3.9 so less max speed

chendaxian888 08-29-2022 06:57 PM

Quote:

Originally Posted by OptionZero (Post 4029291)
the more Z's this guy blows up on the way to "200mph" the higher the value of our non-blown up cars, i guess?

I dont care that I will blow a enegine or crash a car, but I believe that if I operate properly and build my car well, it will not blow

chendaxian888 08-29-2022 06:58 PM

Quote:

Originally Posted by Elmo370z (Post 4029254)
Lol. You must have very little knowledge on what it takes to reach 200mph. Those baby turbos aren’t the answer.

they may grow up later

Spooler 08-29-2022 08:51 PM

You need to start reading. You needs some edjumicationing.

Elmo370z 08-29-2022 09:06 PM

Quote:

Originally Posted by chendaxian888 (Post 4029304)
they may grow up later

You have no idea. Sub for part out. Only one person here has a not running properly built Z to run 200

Spooler 08-29-2022 11:03 PM

Quote:

Originally Posted by Elmo370z (Post 4029317)
You have no idea. Sub for part out. Only one person here has a not running properly built Z to run 200

Yeah, I have no idea what I am going to do either. I should have left the 100k in the bank. WTF.....

Chuck33079 08-30-2022 06:58 AM

Which mod do we Paypal to change this genius's name to Cupcake2.0?

Rusty 08-30-2022 01:52 PM

Quote:

Originally Posted by Chuck33079 (Post 4029339)
Which mod do we Paypal to change this genius's name to Cupcake2.0?

:rofl2:

sx moneypit 08-30-2022 04:13 PM

Quote:

Originally Posted by Rusty (Post 4029354)
:rofl2:

:iagree::icon18:

Elmo370z 08-30-2022 06:32 PM

Lol

chendaxian888 08-31-2022 02:38 PM

Quote:

Originally Posted by Elmo370z (Post 4029317)
You have no idea. Sub for part out. Only one person here has a not running properly built Z to run 200

is that mean some one here run 200 with a built Z?

Spooler 08-31-2022 02:41 PM

Quote:

Originally Posted by chendaxian888 (Post 4029425)
is that mean some one here run 200 with a built Z?

No, My motor lifted the heads before I got a chance. You didn't get the Not Running properly part did you.

cv129 08-31-2022 03:24 PM

Quote:

Originally Posted by chendaxian888 (Post 4029425)
is that mean some one here run 200 with a built Z?

Quote:

Originally Posted by Spooler (Post 4029426)
No, My motor lifted the heads before I got a chance. You didn't get the Not Running properly part did you.

Selective hearing is required to be cupcakes 2.0

Elmo370z 08-31-2022 05:16 PM

Quote:

Originally Posted by cv129 (Post 4029431)
Selective hearing is required to be cupcakes 2.0

New name is approved. Cupcakes 2.0

Rusty 08-31-2022 09:01 PM

Quote:

Originally Posted by Elmo370z (Post 4029437)
New name is approved. Cupcakes 2.0

:rofl2:

SteveVQ 09-01-2022 04:04 PM

Cupcake, you sound and write very special. :icon14:

I'm sure nothing but great success follows you everywhere you go.
:stirthepot:


All times are GMT -5. The time now is 02:05 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2