Nissan 370Z Forum  

New Z or TT my 370?

Or this one. http://www.youtube.com/watch?v=9ablmknF54U

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Like Tree208Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 07-10-2022, 11:31 AM   #61 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,834
Drives: 2013 Nismo 370z
Rep Power: 2684392
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

Or this one.

http://www.youtube.com/watch?v=9ablmknF54U
Spooler is offline   Reply With Quote
Old 07-10-2022, 11:33 AM   #62 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,834
Drives: 2013 Nismo 370z
Rep Power: 2684392
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

Or this one.

http://www.youtube.com/watch?v=9BovlZsztFw
abm89 likes this.
Spooler is offline   Reply With Quote
Old 07-10-2022, 01:00 PM   #63 (permalink)
Track Member
 
SeeThruHead's Avatar
 
Join Date: Jun 2020
Location: Toronto
Posts: 716
Drives: Red '18 Sport Manual
Rep Power: 23498
SeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond reputeSeeThruHead has a reputation beyond repute
Default

Tesla is also the one of if not the safest car in the world to actually be in a crash in.
__________________
My Build thread STH Build Plan Thread
Images too big fix here
SeeThruHead is offline   Reply With Quote
Old 07-10-2022, 04:13 PM   #64 (permalink)
A True Z Fanatic
 
abm89's Avatar
 
Join Date: Feb 2013
Location: Austin, Texas
Posts: 1,386
Drives: 11 370Z | 24 EL450
Rep Power: 64763
abm89 has a reputation beyond reputeabm89 has a reputation beyond reputeabm89 has a reputation beyond reputeabm89 has a reputation beyond reputeabm89 has a reputation beyond reputeabm89 has a reputation beyond reputeabm89 has a reputation beyond reputeabm89 has a reputation beyond reputeabm89 has a reputation beyond reputeabm89 has a reputation beyond reputeabm89 has a reputation beyond repute
Default

Quote:
Originally Posted by Spooler View Post
Yuk!!!! It can go fast but can't stop for chit.

After watching speed academy (sasha really) have the brake failure on track, no thanks.


Tis why if i got an EV, the Polestar 2 is on the top of my list.


Edit: didn't see the final page of this thread before posting, but that's the video!
__________________
Complete Parts List:
https://github.com/abm89/ztouge-build
abm89 is offline   Reply With Quote
Old 07-25-2022, 09:47 PM   #65 (permalink)
Base Member
 
370Z944's Avatar
 
Join Date: Oct 2017
Location: Las Vegas
Posts: 33
Drives: 370zNismo/944 turbo
Rep Power: 8
370Z944 is on a distinguished road
Default

I'm waiting to see the nismo. If it's not super hella tight 3000, I'm gonna put in a vr38.

Seems I could just swap a vr38 top end and all the plumbing and turbos of my choice. Build up the bottom end.. forged rods, knife edged crank, liners.. Not sure what bore and stroke increases are possible. Don't they share the same block? The GTR is just dressed up with bigger bore liners, or longer stroke, right? If the coolant passages line up.. it should be good to go. I could, in theory just by a GTR nismo top end and rebuild it, plug it in... intake, throttle body should all line up and look OEM.. the ultimate Z sleeper. Of course, would need a stand alone, tune, etc etc, etc $$$$ Or is there something I'm not seeing here?

Shrug. For me it's not cost tho. I'll never sell my nismo. The only way I'd sell this car was if the new one was just too friggin' sick to not have. It's about what I think would be cool to have. I like doing mods from the OEM parts bins. It's kinda my thing. I also like displacement... a lot. None of this stuff is cheap, even the "cheap" stuff. I've just accepted that cars are money pits lol. If I sink 100k into it to make it exactly how I want.. idc.(As long as I can space out that 100k at least a few years lmao) The 370 is damn close to exactly how I envision a perfect sports car to be. One of the best platforms to work from out there IMO. If it was built exactly how I want it, it would likely have had a prancing horse, and retailed for 250k+. I would easily dump millions into a 100% custom ground up one off build. It's a damn bargain in those terms.

Also, I think the nismo cars will go way up in value eventually. I'm roughly 100k into my 951, bought it for 12k 20 years ago. I'm doing a similar restomod parts bin build on it that's almost done. It's a 3.0 s2/68 951 top end swap. Sorted ones in any mileage are going for 50ish k now. Mine with the mods and total ground up resto is probably a 80-100k car now. My point is, it's all where you're true perceived value lies.

Anyway.. my .02.

Last edited by 370Z944; 07-25-2022 at 09:50 PM.
370Z944 is offline   Reply With Quote
Old 07-25-2022, 11:53 PM   #66 (permalink)
A True Z Fanatic
 
Join Date: Apr 2013
Location: st. petersburg
Posts: 5,709
Drives: 09 nissan 370z Sp M6
Rep Power: 295378
Elmo370z has a reputation beyond reputeElmo370z has a reputation beyond reputeElmo370z has a reputation beyond reputeElmo370z has a reputation beyond reputeElmo370z has a reputation beyond reputeElmo370z has a reputation beyond reputeElmo370z has a reputation beyond reputeElmo370z has a reputation beyond reputeElmo370z has a reputation beyond reputeElmo370z has a reputation beyond reputeElmo370z has a reputation beyond repute
Default

Quote:
Originally Posted by 370Z944 View Post
I'm waiting to see the nismo. If it's not super hella tight 3000, I'm gonna put in a vr38.

Seems I could just swap a vr38 top end and all the plumbing and turbos of my choice. Build up the bottom end.. forged rods, knife edged crank, liners.. Not sure what bore and stroke increases are possible. Don't they share the same block? The GTR is just dressed up with bigger bore liners, or longer stroke, right? If the coolant passages line up.. it should be good to go. I could, in theory just by a GTR nismo top end and rebuild it, plug it in... intake, throttle body should all line up and look OEM.. the ultimate Z sleeper. Of course, would need a stand alone, tune, etc etc, etc $$$$ Or is there something I'm not seeing here?

Shrug. For me it's not cost tho. I'll never sell my nismo. The only way I'd sell this car was if the new one was just too friggin' sick to not have. It's about what I think would be cool to have. I like doing mods from the OEM parts bins. It's kinda my thing. I also like displacement... a lot. None of this stuff is cheap, even the "cheap" stuff. I've just accepted that cars are money pits lol. If I sink 100k into it to make it exactly how I want.. idc.(As long as I can space out that 100k at least a few years lmao) The 370 is damn close to exactly how I envision a perfect sports car to be. One of the best platforms to work from out there IMO. If it was built exactly how I want it, it would likely have had a prancing horse, and retailed for 250k+. I would easily dump millions into a 100% custom ground up one off build. It's a damn bargain in those terms.

Also, I think the nismo cars will go way up in value eventually. I'm roughly 100k into my 951, bought it for 12k 20 years ago. I'm doing a similar restomod parts bin build on it that's almost done. It's a 3.0 s2/68 951 top end swap. Sorted ones in any mileage are going for 50ish k now. Mine with the mods and total ground up resto is probably a 80-100k car now. My point is, it's all where you're true perceived value lies.

Anyway.. my .02.
The 350 Nismo will go up in value, if it has been unmolested.
370Z944 likes this.
Elmo370z is offline   Reply With Quote
Old 07-26-2022, 03:10 AM   #67 (permalink)
Base Member
 
370Z944's Avatar
 
Join Date: Oct 2017
Location: Las Vegas
Posts: 33
Drives: 370zNismo/944 turbo
Rep Power: 8
370Z944 is on a distinguished road
Talking

Quote:
Originally Posted by Elmo370z View Post
The 350 Nismo will go up in value, if it has been unmolested.
100%

Sometimes I regret not getting the 350 nismo. Frankly, I think the first gen 370 nismo is better tho. I came across two while sourcing my 2011. I think in 20 years the badged 370 nismos will be pretty collectible. In 20 years you'll be able to pop the hood and still go.. no ****.. a vr top end.. rad. The stillen, FI, <insert random aftermarket parts huckster> cars will likely long be forgotten about. Rotting in some storage unit, or barn cause they couldnt get the parts to fix it, and just said eff it. It should also be CARB compliant. Will pass smog and visual.. Looks OEM. Theyre not gonna remove intakes and parts to look for turbos underneath.

That's one of the great things about keeping mods in the OEM bins.. It's arguably not molesting it. Not everyone agrees, but enough do to make the mods worth it in the long run, if done right. It takes a while to find the right buyer to appreciate it, and chunk ouyt a premium for it, but they're around. MA motorsports would be a good shop to do the build if hedging against deflation I think. Of course if you really want to impress and shut up even the most purist snobs you could try to get nismo to do it. MA is pretty closely affiliated with their motorsports division tho, so in 20 years it could still be considered OEM built even. In the Porsche world we have the classic cars program now and porsche will completely disassemble and rebuild your car with original factory tooling. MA is kinda like andial in the porsche world. Porsche ended up buying andial.. Their old builds are basically oem porsches to collectors. Ruf comes to mind, they never built 944's but everyone has heard of them.
Elmo370z likes this.
370Z944 is offline   Reply With Quote
Old 07-26-2022, 09:58 AM   #68 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,834
Drives: 2013 Nismo 370z
Rep Power: 2684392
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

Quote:
Originally Posted by 370Z944 View Post
I'm waiting to see the nismo. If it's not super hella tight 3000, I'm gonna put in a vr38.

Seems I could just swap a vr38 top end and all the plumbing and turbos of my choice. Build up the bottom end.. forged rods, knife edged crank, liners.. Not sure what bore and stroke increases are possible. Don't they share the same block? The GTR is just dressed up with bigger bore liners, or longer stroke, right? If the coolant passages line up.. it should be good to go. I could, in theory just by a GTR nismo top end and rebuild it, plug it in... intake, throttle body should all line up and look OEM.. the ultimate Z sleeper. Of course, would need a stand alone, tune, etc etc, etc $$$$ Or is there something I'm not seeing here?

Shrug. For me it's not cost tho. I'll never sell my nismo. The only way I'd sell this car was if the new one was just too friggin' sick to not have. It's about what I think would be cool to have. I like doing mods from the OEM parts bins. It's kinda my thing. I also like displacement... a lot. None of this stuff is cheap, even the "cheap" stuff. I've just accepted that cars are money pits lol. If I sink 100k into it to make it exactly how I want.. idc.(As long as I can space out that 100k at least a few years lmao) The 370 is damn close to exactly how I envision a perfect sports car to be. One of the best platforms to work from out there IMO. If it was built exactly how I want it, it would likely have had a prancing horse, and retailed for 250k+. I would easily dump millions into a 100% custom ground up one off build. It's a damn bargain in those terms.

Also, I think the nismo cars will go way up in value eventually. I'm roughly 100k into my 951, bought it for 12k 20 years ago. I'm doing a similar restomod parts bin build on it that's almost done. It's a 3.0 s2/68 951 top end swap. Sorted ones in any mileage are going for 50ish k now. Mine with the mods and total ground up resto is probably a 80-100k car now. My point is, it's all where you're true perceived value lies.

Anyway.. my .02.

Where did you get the idea that the VR38 heads would fit on a VQ37 and be better. The VR38 block is the valuable part. Not sure what you have been reading or have been told. That's a No go though.
Spooler is offline   Reply With Quote
Old 07-26-2022, 06:33 PM   #69 (permalink)
Base Member
 
370Z944's Avatar
 
Join Date: Oct 2017
Location: Las Vegas
Posts: 33
Drives: 370zNismo/944 turbo
Rep Power: 8
370Z944 is on a distinguished road
Default

Quote:
Originally Posted by Spooler View Post
Where did you get the idea that the VR38 heads would fit on a VQ37 and be better. The VR38 block is the valuable part. Not sure what you have been reading or have been told. That's a No go though.
Well, this is one of those situations where I'm not entirely sure... yet. Part of why I brought it up. Now that the 944 is finally getting put back together I can start focusing on my Z. Not many have done this yet(if any), and I haven't taken one apart yet to find out. Based on what I'm seeing so far tho, the VQ and VR are the same block. Cast from the same molds. The difference is that they 'dress up' the VR block. Why buy a whole long block? I can just build up my vq bottom end myself, to my specs. Liners, close the deck, longer stroke, lower compression, forged rods. As long as the coolant passages line up it's gravy. They should. The main difference between the engines bottom ends is that the VR is built for boost, and a slightly longer stroke. Also why slapping on aftermarket turbos onto a high compression stock bottom end is not a good idea, and in 20 years will be worthless. Why use the VR heads? "Bett
er"? Whether the vq heads are better is subjective. They're not built for boost, and I'm pretty sure they wont line up with the GTR intake and plumbing. I could be wrong tho. I havent sunk my teeth into all the fine details, yet. I'm certainly not seeing how it's a "no go" though. Unless you got schematics proving otherwise.

They also share the same core chassis FWIW. If any nissans were truly bespoke, they'd be priced with ferraris, bugatti, pagani, etc. The FM platform is what all the rwd nissans share. Some chassis get sent down the line to be dressed up as altimas.. Some get sent over to the nismo plant and dressed up as sports cars with a vq or vr...

Also, in 20 years it will be nice to have as many matching numbers as possible when a concourse judge takes a long gander at it. lol
370Z944 is offline   Reply With Quote
Old 07-26-2022, 06:38 PM   #70 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,834
Drives: 2013 Nismo 370z
Rep Power: 2684392
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

Quote:
Originally Posted by 370Z944 View Post
Well, this is one of those situations where I'm not entirely sure... yet. Part of why I brought it up. Now that the 944 is finally getting put back together I can start focusing on my Z. Not many have done this yet(if any), and I haven't taken one apart yet to find out. Based on what I'm seeing so far tho, the VQ and VR are the same block. Cast from the same molds. The difference is that they 'dress up' the VR block. Why buy a whole long block? I can just build up my vq bottom end myself, to my specs. Liners, close the deck, longer stroke, lower compression, forged rods. As long as the coolant passages line up it's gravy. They should. The main difference between the engines bottom ends is that the VR is built for boost, and a slightly longer stroke. Also why slapping on aftermarket turbos onto a high compression stock bottom end is not a good idea, and in 20 years will be worthless. Why use the VR heads? "Bett
er"? Whether the vq heads are better is subjective. They're not built for boost, and I'm pretty sure they wont line up with the GTR intake and plumbing. I could be wrong tho. I havent sunk my teeth into all the fine details, yet. I'm certainly not seeing how it's a "no go" though. Unless you got schematics proving otherwise.

They also share the same core chassis FWIW. If any nissans were truly bespoke, they'd be priced with ferraris, bugatti, pagani, etc. The FM platform is what all the rwd nissans share. Some chassis get sent down the line to be dressed up as altimas.. Some get sent over to the nismo plant and dressed up as sports cars with a vq or vr...

Also, in 20 years it will be nice to have as many matching numbers as possible when a concourse judge takes a long gander at it. lol

The VR38 and the VQ37VHR are not the same block. They are way different. The VQ oil pump is ran on the crank. The VR38 oil pump is ran via a chain on the crank. Totally different. The VR38 block is closed deck with 13mm head studs. The VQ is open deck with 12mm head studs. The engines are totally different. Can't leave off the drive shaft running through the factory oil pain of the VR38. VR38's are taller also.
Spooler is offline   Reply With Quote
Old 07-26-2022, 07:35 PM   #71 (permalink)
Base Member
 
370Z944's Avatar
 
Join Date: Oct 2017
Location: Las Vegas
Posts: 33
Drives: 370zNismo/944 turbo
Rep Power: 8
370Z944 is on a distinguished road
Default

Quote:
Originally Posted by Spooler View Post
The VR38 and the VQ37VHR are not the same block. They are way different. The VQ oil pump is ran on the crank. The VR38 oil pump is ran via a chain on the crank. Totally different. The VR38 block is closed deck with 13mm head studs. The VQ is open deck with 12mm head studs. The engines are totally different. Can't leave off the drive shaft running through the factory oil pain of the VR38. VR38's are taller also.
Again, same casting. Dressed up for boost.. I forgot to mention AWD dressings.. my bad. Pumps and chains should be auxilary to the block with the same exact bore, and coolant passages. Of course all that heavy obese godzilla crap would be deleted. LMAO Besides, its moot if I'm just plugging in a top end to a vq bottom end dressed up for boost to my liking. All you would really need is forged rods, and lower comp pistons to have a reiable turbo car(bottom end wise). If you want to crank out high boost, yeah.. you'd want to close the deck to prevent the jugs from wiggling.. like nissan did. They already spent millions here writing the playbook, might as well follow it. It is a highly developed motorsport platform already.. they just didn't put all the parts on it that I want cause it would've taken sales from their flagship gtr pig. Nothing stopping me from taking those parts, and configuring them how I want on a proper RWD manual.

"The VQ oil pump is ran on the crank. The VR38 oil pump is ran via a chain on the crank."

The crank is not the same. The oiling difference I would assume is for a dry sump. The VR has 2,5 mm longer stroke. So yeah, def different crank.. Same block, coolant passages and bolt patterns tho.

"The VR38 block is closed deck with 13mm head studs. The VQ is open deck with 12mm head studs."

1mm drill and tap, then call ARP. Done. Just needs to be the same pattern. The deck, again.. put whatever liners you want in it. Doesn't even have to be the same material nissan ran. Hell, put iron sleeves in with closed deck, and call mahle for some pistons. I like JE too. You could probably put in the VR sleeves even. The material you choose for sleeves determines which pistons you can run is all really. Closed deck is really necessary for high boost apps. Hence why nissan put it on their boosted version of the FM sports car platform. On low to moderate boost, you wont see wiggle. Especially if tuned properly. My 944 has an open deck. I put 50k on it with 16 psi.. no issues. Again, decking, oiling, sleeving.. this is all ancillary to the actual block/crankcase. All the rwd nissans share many of the same core parts. They do this to save money. and manufacture a sports car people can afford vs the GTR hardly anyone can afford. It's a tuner car, it was literally designed to be finished and tuned by the end user. If you want nissan to dress your z chassis up from the factory with race tech, and performance to their liking, its called a GTR. The GTR doesn't do it for me. It's a bloated, ugly pig IMO. Not how I would dress it up, thats part of why they make the z the way they do. It's got to fit a budget. You could spend200-250k on a nismo gtr dressed up just how nissan thinks you should want it, or you could buy a z for 40-50k, and for another 100k(max high number) plug in the parts and configure it how you want it. RWD manual FTW. I'll totally highjack their engineering, and develoment tho. Put it all into one car to my liking. Mwahahaha. They do have tasty milkshakes... Sip, sip, gulp.

Last edited by 370Z944; 07-26-2022 at 07:40 PM.
370Z944 is offline   Reply With Quote
Old 07-26-2022, 07:45 PM   #72 (permalink)
Base Member
 
370Z944's Avatar
 
Join Date: Oct 2017
Location: Las Vegas
Posts: 33
Drives: 370zNismo/944 turbo
Rep Power: 8
370Z944 is on a distinguished road
Default

Oh, the 6 speed also might not line up with the bell housing. It should, but if not its not real expensive to have an adapter plate fabricated. Again, should be the same pattern

What's the deal with the borg-warner 6 speed the gtr briefly had? I'm assuming the diff wouldn't work. That borg-warner lump should be crate ready from borg-warner off the shelf with plenty of parts availability.

Last edited by 370Z944; 07-26-2022 at 07:47 PM.
370Z944 is offline   Reply With Quote
Old 07-26-2022, 09:01 PM   #73 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,834
Drives: 2013 Nismo 370z
Rep Power: 2684392
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

Quote:
Originally Posted by 370Z944 View Post
Oh, the 6 speed also might not line up with the bell housing. It should, but if not its not real expensive to have an adapter plate fabricated. Again, should be the same pattern

What's the deal with the borg-warner 6 speed the gtr briefly had? I'm assuming the diff wouldn't work. That borg-warner lump should be crate ready from borg-warner off the shelf with plenty of parts availability.
LOL, you don't know crap. Now I am tired of dealing with your dumb butt. Have a nice day. Go back to Facebook.
Spooler is offline   Reply With Quote
Old 07-26-2022, 10:12 PM   #74 (permalink)
Base Member
 
370Z944's Avatar
 
Join Date: Oct 2017
Location: Las Vegas
Posts: 33
Drives: 370zNismo/944 turbo
Rep Power: 8
370Z944 is on a distinguished road
Default

Quote:
Originally Posted by Spooler View Post
LOL, you don't know crap. Now I am tired of dealing with your dumb butt. Have a nice day. Go back to Facebook.
Wow.. ok.

Thanks for such a technical, and concise refutation. Funny, cause I've literally never had a facebook account. 23 years later after finding out about it from a from a friend that was attending upenn at the time. Was pretty obvious from day one.

LMAO. So far you've told me nothing thats not easily modded. Bigger head studs.. cool, bro. Oooh, ahh. lol Makes sense.. boosted motor. That's why they make these things called a tap & die. Bigger bored out threads=bigger studs. Pattern is same, coolant passages are same. There were people like you on rennlist when I first did this with my 94I grafted a 951 top end to a s2 bottom end, and 968 crank, with a 2.7 89 944 head with proper passages that lined up with the 951 intake that connected to all the upstream turbo goodies. It's not possible they said, very few have done it right, it will be too expensive, blah blah Now there are likely over 100 3.0 builds in the wild, and an entire registry for them on rennlist.

Don't worry, sweety. I'll probably start a thread about the build just to see if you're right or wrong once I actually go down that rabbit hole. Once the 44 is done. I'll probably get a 4x4 and the nissan will get the proper treatment too now that the warranty is up. should be done by fall.

I'm figuring someone around here knows the nuances already. I'm still not seeing any reason why not. Then again, I'm just a "dumb butt". What would I know? That must be the case. That's all the convincing I need.

http://www.youtube.com/watch?v=https://www.youtube.com/watch?v=OVnmIbzExOA

Last edited by 370Z944; 07-26-2022 at 10:18 PM.
370Z944 is offline   Reply With Quote
Old 07-26-2022, 11:35 PM   #75 (permalink)
A True Z Fanatic
 
Join Date: Aug 2018
Location: Chicagoland
Age: 38
Posts: 5,261
Drives: A Garage Queen
Rep Power: 2684371
BettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond reputeBettyZ has a reputation beyond repute
Default

And the childish woke come for Spooler! This thread is cancelled in five, four, thr... oh wait I forgot, the concept of numbers are/is/they colonialism.
JARblue, gomer_110, Rusty and 1 others like this.
__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods
BettyZ is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 03:34 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2