SOHO A2A SC filter
 

Hello everyone,

I was wondering if anyone has a good option for the filter placement which comes on the SOHO A2A kit. I have the V1 A2A kit which came with a K&N filter. I didn't choose for the turboguard because of the potential dirt/sand, but the K&N filter can only be replaced when you detache the whole SC.

Does anyone have a solution / idea for that? Would like to have a filter set up but with easier replacement options.

KR.

Same situation but with the TopGunz kit V1. Whom ever has a parts list solution it’s greatly appreciated!

I decided to make a custom tube from the SC to the front wheel arch with a filter there. Will measure dimensions soon to max measures. Can let you know.

Please do! Thank you!

https://www.instagram.com/p/CH18N7kn...d=YmMyMTA2M2Y=

https://www.instagram.com/p/CbPuqXLP...d=YmMyMTA2M2Y=

https://www.instagram.com/p/CRWHVwwn...d=YmMyMTA2M2Y=

Reach me out through the IG links if there is anything you want to know about it. I barely visit here.

So maybe for others with the same question: I decided to go for a custom 3" intake with K&N filter in front off the wheel. The filter that was the max. size with fewest adjustments was the K&N RU-1045, which is around 4 times larger then the stock SOHO filter. Only had to delete the headlight washer unit. 3,5" intake is possible but then you have to delete quite a bit of your front chassis.

See image below.

https://www.instagram.com/p/Cj0zK-pq..._web_copy_link

Awesome - any chance you have pipe part number and place you purchased from? I’m excited to get this done!

Can recommend! sound also improved :) I had the pipe custom made in The Netherlands. I know SOHO also sells the pipe (think 3") but I don't know for sure if it will fit with the mentioned K&N filter. SOHO sells the pipe (without filter) for around 500 dollars if I remember correctly. I had one custom made for around 300 dollar.