Topgunz ROTREX C38R Supercharger Kit

SeeThruHead · 10-26-2021, 10:32 PM

Quote:

Originally Posted by redondoaveb

Not sure what kind of power you're planning on making but you may want to think about 1300cc injectors. You can run out of injector real quick with 1000cc

i'd like 650WHP on pump gas. worried about the already high compression ratio of the vq37. was thinking that's relatively conservative numers these days on this platform but would definitely step up the injector if necessary.

redondoaveb · 10-26-2021, 10:38 PM

Quote:

Originally Posted by SeeThruHead

i'd like 650WHP on pump gas. worried about the already high compression ratio of the vq37. was thinking that's relatively conservative numers these days on this platform but would definitely step up the injector if necessary.

What octane do you have there? 650 on pump might be out of reach. I had 1050 injectors and a single walbro 450 running e85 and my injector duty cycle was at 125% at 650whp. I had to go with 1300cc's and twin pumps

SeeThruHead · 10-26-2021, 11:21 PM

Quote:

Originally Posted by redondoaveb

What octane do you have there? 650 on pump might be out of reach. I had 1050 injectors and a single walbro 450 running e85 and my injector duty cycle was at 125% at 650whp. I had to go with 1300cc's and twin pumps

Just 94 at certain pumps. 91 everywhere else.

redondoaveb · 10-27-2021, 12:28 AM

Quote:

Originally Posted by SeeThruHead

Just 94 at certain pumps. 91 everywhere else.

91 might be pushing it. 94 should be doable

HapaZ · 10-26-2021, 11:35 PM

Quote:

Originally Posted by redondoaveb

What octane do you have there? 650 on pump might be out of reach. I had 1050 injectors and a single walbro 450 running e85 and my injector duty cycle was at 125% at 650whp. I had to go with 1300cc's and twin pumps

What pumps did you go with? I'm considering a TI automotive brushless pump and wondering if one will do for around 650whp on e85.

redondoaveb · 10-27-2021, 12:29 AM

Quote:

Originally Posted by HapaZ

What pumps did you go with? I'm considering a TI automotive brushless pump and wondering if one will do for around 650whp on e85.

I kept my walbro 450 and added a 525 hellcat

HapaZ · 10-27-2021, 01:41 PM

Quote:

Originally Posted by redondoaveb

I kept my walbro 450 and added a 525 hellcat

Ah, so I'm guessing that one pump isn't going to cut the mustard for me.

Birdiev · 10-27-2021, 02:48 PM

Quote:

Originally Posted by HapaZ

Ah, so I'm guessing that one pump isn't going to cut the mustard for me.

Honestly I think it depends on your fuel set up as a whole. Seethroughead is wanted to get up to 650 on pump which the 1050cc should be enough as long as he has the rails to go with it. (Although 580 to 600 may be a better number).

redondoaveb ran out of duty cycle but keep in mind he was running on e85 so takes more volume/fuel to get the same numbers that's why he needed bigger injectors and pumps.

I hit 650 with rails and the hellcat pump running 1300cc injectors at under 80% cycle.

Keep in mind you are be going to want to move volume over pressure. I feel like you shouldn't want the pumps fighting each other. But again depends on your setup as a whole unit

HapaZ · 10-27-2021, 04:06 PM

Quote:

Originally Posted by Birdiev

Honestly I think it depends on your fuel set up as a whole. Seethroughead is wanted to get up to 650 on pump which the 1050cc should be enough as long as he has the rails to go with it. (Although 580 to 600 may be a better number).

redondoaveb ran out of duty cycle but keep in mind he was running on e85 so takes more volume/fuel to get the same numbers that's why he needed bigger injectors and pumps.

I hit 650 with rails and the hellcat pump running 1300cc injectors at under 80% cycle.

Keep in mind you are be going to want to move volume over pressure. I feel like you shouldn't want the pumps fighting each other. But again depends on your setup as a whole unit

Yeah fair points. I hadn't planned on changing the fuel rails, but I do have 1300cc injectors already so maybe I should reconsider. $1400 on fuel pumps alone seems pretty insane, but I know I gotta pay to play. I might run with 1 pump and see how far Eugene can take it and then decide down the line if I want bigger numbers.

redondoaveb · 10-27-2021, 03:29 PM

Quote:

Originally Posted by HapaZ

Ah, so I'm guessing that one pump isn't going to cut the mustard for me.

See Birdiev post

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Rotrex C38R Supercharger	R3drckt09	Forced Induction	145	02-05-2023 08:37 AM
rotrex c38r spec sheet	tiller	Forced Induction	11	09-13-2018 11:57 AM
Rotrex C38R & are HR/VHR GTM SC mounting brackets the same?	SS_Firehawk	Engine & Drivetrain	6	02-09-2018 10:33 PM
Replacement Rotrex Supercharger for the GTM Stage 1 kit	wind.zero	Forced Induction	29	06-03-2014 06:20 AM
[FOR SALE] Rotrex C38-81 Supercharger Only	pokeyl	Parts for sale (Private Classifieds)	3	02-17-2014 09:07 AM

***Topgunz ROTREX C38R Supercharger Kit***

Topgunz ROTREX C38R Supercharger Kit