Topgunz ROTREX C38R Supercharger Kit

TopgunZ · 05-17-2021, 10:21 AM

We did experience the notorious headlift at 23psi. On the dyno, we were pressurizing the coolant system and had a lot of coolant come out of the overflow tank on a cold run.

What does this mean for us? The RnD car is going under the knife for built block with ARP L19 head studs to eliminate the bolts from stretching. This kit just makes incredible power!

What does this mean for you? Adjust the boost to a more manageable level on a stock motor by setting the valve to open up and bleed off what you don't want to ingest. That is how this kit will arrive to you. If you want 800whp some day then you build the bottom end.

Whjaxn17 · 05-17-2021, 10:50 AM

Quote:

Originally Posted by TopgunZ

Well it turns out that these motors will suffer from headlift at 23psi.

That is ancient news. SOHO and Mazworx are the only 2 that have the issue remedied.

Spooler · 05-17-2021, 11:17 AM

Quote:

Originally Posted by TopgunZ

Well it turns out that these motors will suffer from headlift at 23psi. On the dyno, we were pressurizing the coolant system and had a lot of coolant come out of the overflow tank on a cold run.

What does this mean for us? The RnD car is going under the knife for built block with ARP L19 head studs to eliminate the bolts from stretching. This kit just makes incredible power!

What does this mean for you? Adjust the boost to a more manageable level on a stock motor by setting the valve to open up and bleed off what you don't want to ingest. That is how this kit will arrive to you. If you want 800whp some day then you build the bottom end.

Welcome to the club. Now it is gonna get expensive if you want more power. Head studs alone won't do chit.

Spooler · 05-17-2021, 11:46 AM

Money wise, you are looking at 15 to 20k just for the engine. It also depends if you plasma cut the top of the block. If so, it is garbage and you will be looking for a junk yard long block to build off of. Why in the heck did you push the power up this high on a stock engine?

Spooler · 05-17-2021, 12:11 PM

Eugene T. didn't save you from yourself. No other reputable tuner would have done it. They would have refused. So much for how great he is. BS......

TopgunZ · 05-17-2021, 12:46 PM

We were very much so aware of the potential of this. We also very much so wanted to see just how much boost it took. We obviously went into this knowing we were on a fuse. I already had parts coming for this build. I am well aware of the cost. Eugene fully expressed his concern over the amount of boost we were running. We agreed but wanted to push limits. Do not for a second think this has anything to do with his tuning ability.

We went in knowing we were going to build this thing at some point. Just weren't sure when and now we know. The owner of the car wants to run 800whp.

I hear Dynosty has the best solution for a fix and we will definitely be using them.

Spooler · 05-17-2021, 12:55 PM

Quote:

Originally Posted by TopgunZ

We were very much so aware of the potential of this. We also very much so wanted to see just how much boost it took. We obviously went into this knowing we were on a fuse. I already had parts coming for this build. I am well aware of the cost. Eugene fully expressed his concern over the amount of boost we were running.

We went in knowing we were going to build this thing at some point. Just weren't sure when and now we know. The owner of the car wants to run 800whp.

I hear Dynosty has the best solution for a fix and we will definitely be using them.

That's a NO.... You have fallen victim to the tons of misinformation that is out there.

TopgunZ · 05-17-2021, 01:00 PM

Quote:

Originally Posted by Spooler

That's a NO.... You have fallen victim to the tons of misinformation that is out there.

You are entitled to your opinion just like I have heard SOHO claims they have it figured out and they do not. I guess we will see.

Spooler · 05-17-2021, 01:03 PM

Quote:

Originally Posted by TopgunZ

You are entitled to your opinion just like I have heard SOHO claims they have it figured out and they do not. I guess we will see.

Prove that SOHO doesn't have it figured out. I beat you can't. I know you have an issue with them. So, unless you can prove it you need to give credit to them for what they have accomplished.

Spooler · 05-17-2021, 01:09 PM

I have a Mazworx engine so I am not biased. I give them credit for what they have accomplished.

Spooler · 05-17-2021, 01:25 PM

Ah, I got it figured out. You are part of that Boosted VQ Facebook Group. Enough said.

TopgunZ · 05-17-2021, 01:48 PM

This thread is about the Rotrex supercharger kit and not built motors and your perceptions on things. Thanks.

Spooler · 05-17-2021, 01:51 PM

Quote:

Originally Posted by TopgunZ

This thread is about the Rotrex supercharger kit and not built motors and your perceptions on things. Thanks.

Yes it is but when you started slandering SOHO, all beats are off.

DarkJak · 05-17-2021, 02:33 PM

Stupid question and I'm kinda afraid to ask it right now, but would the Rotrex kit make sense over your original kit if I'm just tagerting 450 to 500 whp? Is it still a more efficient supercharger at lower boost levels compared to the old Vortech kits?

TopgunZ · 05-17-2021, 03:01 PM

Quote:

Originally Posted by DarkJak

Stupid question and I'm kinda afraid to ask it right now, but would the Rotrex kit make sense over your original kit if I'm just tagerting 450 to 500 whp? Is it still a more efficient supercharger at lower boost levels compared to the old Vortech kits?

TOPGUN SPEEDWORKS ROTREX SC KIT Vs. Vortech A2A kits
Rotrex: Record breaking 708+whp/556+wtq and 22+ psi out of the box with a full filter
A2A: V3 requires overspinning and a turboguard for only 15psi.
Rotrex:Full filter that can be cleaned in 5 minutes.
A2A: Dirt and sand ingesting turboguard..or motorcycle filter that restricts psi to 12 and requires the removal of the entire supercharger to clean.
Rotrex: Cold Air Intake
A2A: Hot Air Intake (sits in engine bay)
Rotrex: Stock plenum
A2A: Stillen plenum requiring MAF and TB extension harnesses which are extremely problematic and known heatsoak issues
Rotrex: Purrs like a kitten and whines like a F1 car
A2A: Louder and chatter due to gear backlash
Rotrex: Ability to dial in exactly what psi you want to run with in cabin boost select options
A2A: Choice between 8psi or 9psi pulley. Manually removing them to swap.
Rotrex: 50,000 mile maintenance oil changes
A2A: 7,500 mile maintenance oil changes
Rotrex: Most affordable supercharger kit on the market that can break 500whp.
A2A: More expensive.

05-17-2021, 10:21 AM	#166 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	We did experience the notorious headlift at 23psi. On the dyno, we were pressurizing the coolant system and had a lot of coolant come out of the overflow tank on a cold run. What does this mean for us? The RnD car is going under the knife for built block with ARP L19 head studs to eliminate the bolts from stretching. This kit just makes incredible power! What does this mean for you? Adjust the boost to a more manageable level on a stock motor by setting the valve to open up and bleed off what you don't want to ingest. That is how this kit will arrive to you. If you want 800whp some day then you build the bottom end. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 05-17-2021 at 04:12 PM.

05-17-2021, 11:46 AM	#169 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Money wise, you are looking at 15 to 20k just for the engine. It also depends if you plasma cut the top of the block. If so, it is garbage and you will be looking for a junk yard long block to build off of. Why in the heck did you push the power up this high on a stock engine? BOLIO 671, Rusty, Optimiser and 1 others like this.

05-17-2021, 12:11 PM	#170 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Eugene T. didn't save you from yourself. No other reputable tuner would have done it. They would have refused. So much for how great he is. BS...... Optimiser likes this.

05-17-2021, 12:46 PM	#171 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	We were very much so aware of the potential of this. We also very much so wanted to see just how much boost it took. We obviously went into this knowing we were on a fuse. I already had parts coming for this build. I am well aware of the cost. Eugene fully expressed his concern over the amount of boost we were running. We agreed but wanted to push limits. Do not for a second think this has anything to do with his tuning ability. We went in knowing we were going to build this thing at some point. Just weren't sure when and now we know. The owner of the car wants to run 800whp. I hear Dynosty has the best solution for a fix and we will definitely be using them. SwedeZ likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 05-17-2021 at 01:02 PM.

05-17-2021, 01:25 PM	#176 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Ah, I got it figured out. You are part of that Boosted VQ Facebook Group. Enough said. Optimiser and Whjaxn17 like this.

05-17-2021, 01:09 PM	#175 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	I have a Mazworx engine so I am not biased. I give them credit for what they have accomplished.

05-17-2021, 01:48 PM	#177 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	This thread is about the Rotrex supercharger kit and not built motors and your perceptions on things. Thanks. Birdiev likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-17-2021, 02:33 PM	#179 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	Stupid question and I'm kinda afraid to ask it right now, but would the Rotrex kit make sense over your original kit if I'm just tagerting 450 to 500 whp? Is it still a more efficient supercharger at lower boost levels compared to the old Vortech kits? __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Rotrex C38R Supercharger	R3drckt09	Forced Induction	145	02-05-2023 09:37 AM
rotrex c38r spec sheet	tiller	Forced Induction	11	09-13-2018 12:57 PM
Rotrex C38R & are HR/VHR GTM SC mounting brackets the same?	SS_Firehawk	Engine & Drivetrain	6	02-09-2018 11:33 PM
Replacement Rotrex Supercharger for the GTM Stage 1 kit	wind.zero	Forced Induction	29	06-03-2014 07:20 AM
[FOR SALE] Rotrex C38-81 Supercharger Only	pokeyl	Parts for sale (Private Classifieds)	3	02-17-2014 10:07 AM

***Topgunz ROTREX C38R Supercharger Kit***

Topgunz ROTREX C38R Supercharger Kit