Who else on here is on the list for BP’s new twin kit?

NeverBoneStck · 08-16-2021, 03:16 PM

Quote:

Originally Posted by tiller

Tomorrow is start up day hopefully, FI exhaust is scheduled to show up tomorrow, crossing my fingers, hope all goes well.
Attachment 147836

Would you happen to have picks of the engine mounts?

tiller · 08-17-2021, 05:50 AM

Nothing right now, if I get it on the hoist in the next little bit I’ll snap a pic.

Nvrdun · 08-17-2021, 07:07 AM

Quote:

Originally Posted by NeverBoneStck

Would you happen to have picks of the engine mounts?

Best I could do for now.

Sent from my SM-N950U using Tapatalk

NeverBoneStck · 08-17-2021, 01:08 PM

I appreciate that

tiller · 08-19-2021, 05:42 AM

I believe the brand was bds. Correct me if Iam wrong.

xxAGAVExx · 08-20-2021, 12:58 PM

Question on install. About to attach the turbos, and the (pardon my noob terminology) input side from exhaust and output to the IC are not in the position the should be, they are off almost 90 degrees. Did I get the wrong turbos? Can I unbolt, rotate and re-bolt or is that going to affect internal parts that are complicated, ie would mess it all up? Not sure if you can tell from pic, but laid the turbo on top of the instructions so you can see what I’m talking about. The input from the exhaust is matching the picture but the outlet to the IC is facing down and should be facing top and left.

Sent from my iPhone using Tapatalk

JLarson · 08-20-2021, 02:39 PM

You can loosen the bolts (should do this as minimally as possible to prevent anything from moving inside) and re-clock the turbo to reflect the image. I'm surprised there is nothing in the instructions about that, it's referenced in the original BP kit.

redondoaveb · 08-20-2021, 02:49 PM

Quote:

Originally Posted by JLarson

You can loosen the bolts (should do this as minimally as possible to prevent anything from moving inside) and re-clock the turbo to reflect the image. I'm not surprised there is nothing in the instructions about that, it's referenced in the original BP kit.

Fify

xxAGAVExx · 08-20-2021, 03:02 PM

Quote:

Originally Posted by JLarson

You can loosen the bolts (should do this as minimally as possible to prevent anything from moving inside) and re-clock the turbo to reflect the image. I'm surprised there is nothing in the instructions about that, it's referenced in the original BP kit.

That was it and very simple, thanks.

Sent from my iPhone using Tapatalk

Nvrdun · 08-25-2021, 02:49 PM

I've never been so stressed...

Nvrdun · 08-25-2021, 03:01 PM

Quote:

Originally Posted by tiller

Tomorrow is start up day hopefully, FI exhaust is scheduled to show up tomorrow, crossing my fingers, hope all goes well.
Attachment 147836

Do you have any piping rubbing?

tiller · 08-26-2021, 05:41 AM

Quote:

Originally Posted by Nvrdun

Do you have any piping rubbing?

Issues with the drivers side pipe going to the bottom of Intercooler?

Nvrdun · 08-29-2021, 01:18 PM

Yea I got most of it to clear Thanks to Sasha! but that air filter I'm not so sure about.

tiller · 09-19-2021, 08:53 PM

A little update on my z , roughly 13lbs on e85, cars a beast, looking forward to turning it up.

cwrenny · 09-29-2021, 06:28 PM

I'm looking to get in on the next build of this kit, is this setup CMAK compatible? Just starting to price out the supporting mods

08-17-2021, 01:08 PM	#109 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	I appreciate that Nvrdun likes this. __________________ Juiced! That is all you need to know !!

08-20-2021, 12:58 PM	#111 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,036 Drives: 09 370Z BLK M6 Rep Power: 53924	Question on install. About to attach the turbos, and the (pardon my noob terminology) input side from exhaust and output to the IC are not in the position the should be, they are off almost 90 degrees. Did I get the wrong turbos? Can I unbolt, rotate and re-bolt or is that going to affect internal parts that are complicated, ie would mess it all up? Not sure if you can tell from pic, but laid the turbo on top of the instructions so you can see what I’m talking about. The input from the exhaust is matching the picture but the outlet to the IC is facing down and should be facing top and left. Sent from my iPhone using Tapatalk __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

08-20-2021, 02:39 PM	#112 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684370	You can loosen the bolts (should do this as minimally as possible to prevent anything from moving inside) and re-clock the turbo to reflect the image. I'm surprised there is nothing in the instructions about that, it's referenced in the original BP kit. xxAGAVExx, johnxxx, redondoaveb and 1 others like this. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

09-19-2021, 08:53 PM	#119 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	A little update on my z , roughly 13lbs on e85, cars a beast, looking forward to turning it up. xxAGAVExx and cwrenny like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATS twin plate vs Os giken twin disk	Elmo370z	Engine & Drivetrain	54	04-21-2018 07:27 AM
New Twin Turbo build in progress: Another Gamma V3 Twin turbo install	Nyght	Forced Induction	37	08-08-2017 10:27 AM
Which stage of twin-turbo/twin-supercharger kit should I get?	Nuc370z	Forced Induction	13	12-30-2015 08:15 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 01:02 PM
GTM MHI Twin Turbo vs. Fast Intentions Twin Turbo	isayimandrew	Forced Induction	26	05-29-2013 09:47 PM

08-17-2021, 05:50 AM	#107 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	Nothing right now, if I get it on the hoist in the next little bit I’ll snap a pic.

08-19-2021, 05:42 AM	#110 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 14	I believe the brand was bds. Correct me if Iam wrong.

08-25-2021, 02:49 PM	#115 (permalink)
Nvrdun Base Member Join Date: Aug 2018 Location: NY Posts: 30 Drives: 16 370Z,18 STI Rep Power: 3362	I've never been so stressed...

08-29-2021, 01:18 PM	#118 (permalink)
Nvrdun Base Member Join Date: Aug 2018 Location: NY Posts: 30 Drives: 16 370Z,18 STI Rep Power: 3362	Yea I got most of it to clear Thanks to Sasha! but that air filter I'm not so sure about.

09-29-2021, 06:28 PM	#120 (permalink)
cwrenny Base Member Join Date: Jun 2017 Location: Toronto Posts: 17 Drives: 2011 G37 IPL Rep Power: 8	I'm looking to get in on the next build of this kit, is this setup CMAK compatible? Just starting to price out the supporting mods