Switchback racing Single kit.

Whjaxn17 · 10-13-2020, 04:28 PM

Quote:

Originally Posted by Randomizer23

Someone who I contacted on SOHO told me the stage 2 kit maxes out at 600whp. Im also worried that the spool times they have are not as good as the BP kit

So you got second hand information and fully intended to take that @ face value on a $10k decision? Glad you're ballin out like that.

George, as in George Sohoritis told me the stage 2 kit will make over 700whp on E85. Maybe you should actually call them and get details directly from the manufacturer.

Quote:

Originally Posted by Randomizer23

My plan is to get all of my supporting mods to be able to support 800whp except for a built motor and run on stock block for a bit 500whp. Then slap in a built motor and turn up the boost.

What's the rest of that list look like?

Randomizer23 · 10-13-2020, 04:54 PM

Quote:

Originally Posted by Elmo370z

Lol, I would recommend doing a lot more research on your part. Making power is easy with VQ’s, keeping them together is another question. Just head studs isn’t going to work at 800whp.

Yea I am going to get the motor fully built. What are some precautions that you think are important to make it hold together?

Randomizer23 · 10-13-2020, 04:59 PM

Quote:

Originally Posted by Whjaxn17

So you got second hand information and fully intended to take that @ face value on a $10k decision? Glad you're ballin out like that.

George, as in George Sohoritis told me the stage 2 kit will make over 700whp on E85. Maybe you should actually call them and get details directly from the manufacturer.

What's the rest of that list look like?

You are probably right I should do more research on the SOHO kit. I have been looking into the BP kit alot lately sorry!.

I will be getting a stage 4 clutch + flywheel from zspeed
CJM s1.se fuel return +their relay
AEM gauges
OS giken 1.5way LSD
id 1300cc injectors
still debating on 1 walbro 450 or 2 of them
and still deciding on flex fuel.
305/45/17 tire and 325/30/19 for street tires
BC coilovers
motordyne exhaust with art pipes
z1 oil cooler unless the bp kit comes with one.
still debating on engine and trans mounts.

JLarson · 10-13-2020, 05:54 PM

Quote:

Originally Posted by Randomizer23

You are probably right I should do more research on the SOHO kit. I have been looking into the BP kit alot lately sorry!.

I will be getting a stage 4 clutch + flywheel from zspeed
CJM s1.se fuel return +their relay
AEM gauges
OS giken 1.5way LSD
id 1300cc injectors
still debating on 1 walbro 450 or 2 of them
and still deciding on flex fuel.
305/45/17 tire and 325/30/19 for street tires
BC coilovers
motordyne exhaust with art pipes
z1 oil cooler unless the bp kit comes with one.
still debating on engine and trans mounts.

Remember that if you go with some of the kits, the ART pipes won't be an option (BP for example). BP Turn Key kit does have an oil cooler, but I'd say go with Fast Intentions Oil Cooler. Good price, great quality components. I've had multiple small issues with the oil cooler from the turnkey kit leaking, and the fittings are not great quality.

NorthStyle · 10-13-2020, 06:23 PM

I can't think of any of the turbo kits that would allow the use of ART pipes other than a rear mounted one.

Randomizer23 · 10-13-2020, 06:31 PM

Quote:

Originally Posted by JLarson

Remember that if you go with some of the kits, the ART pipes won't be an option (BP for example). BP Turn Key kit does have an oil cooler, but I'd say go with Fast Intentions Oil Cooler. Good price, great quality components. I've had multiple small issues with the oil cooler from the turnkey kit leaking, and the fittings are not great quality.

Thanks for the info about oil coolers.

Randomizer23 · 10-13-2020, 06:31 PM

Quote:

Originally Posted by NorthStyle

I can't think of any of the turbo kits that would allow the use of ART pipes other than a rear mounted one.

I will probably end up selling them

Elmo370z · 10-13-2020, 06:51 PM

Quote:

Originally Posted by Randomizer23

Yea I am going to get the motor fully built. What are some precautions that you think are important to make it hold together?

Either what soho is doing, copper Hg and o rings, or what mazworx has been doing, darton mid sleeves with fire rings, step decking the block, and a secret Hg they use.

Elmo370z · 10-13-2020, 06:52 PM

Quote:

Originally Posted by Randomizer23

You are probably right I should do more research on the SOHO kit. I have been looking into the BP kit alot lately sorry!.

I will be getting a stage 4 clutch + flywheel from zspeed
CJM s1.se fuel return +their relay
AEM gauges
OS giken 1.5way LSD
id 1300cc injectors
still debating on 1 walbro 450 or 2 of them
and still deciding on flex fuel.
305/45/17 tire and 325/30/19 for street tires
BC coilovers
motordyne exhaust with art pipes
z1 oil cooler unless the bp kit comes with one.
still debating on engine and trans mounts.

With that you will eventually join the blown motor club at the power levels you want.

Randomizer23 · 10-13-2020, 07:31 PM

Quote:

Originally Posted by Elmo370z

With that you will eventually join the blown motor club at the power levels you want.

Why?

Randomizer23 · 10-13-2020, 07:34 PM

Quote:

Originally Posted by Elmo370z

Either what soho is doing, copper Hg and o rings, or what mazworx has been doing, darton mid sleeves with fire rings, step decking the block, and a secret Hg they use.

Mazworx's motors are 20k cad for me... Still debating on a local shop for 13k or mazworx

Elmo370z · 10-13-2020, 08:54 PM

Quote:

Originally Posted by Randomizer23

Mazworx's motors are 20k cad for me... Still debating on a local shop for 13k or mazworx

Maxworx blocks aren’t 20k.

Elmo370z · 10-13-2020, 08:55 PM

Quote:

Originally Posted by Randomizer23

Why?

Just l19 and 625 running big power still blows HG.

Spooler · 10-13-2020, 08:57 PM

Quote:

Originally Posted by Elmo370z

Maxworx blocks aren’t 20k.

He is in Canada. LOL conversion. That is what the CAD is.

Randomizer23 · 10-13-2020, 09:00 PM

Quote:

Originally Posted by Elmo370z

Just l19 and 625 running big power still blows HG.

Now im confused... I stated earlier I am fully building the motor.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Switchback Racing turbo kit + supporting mods	seanmorr370	Parts for sale (Private Classifieds)	8	08-12-2020 10:17 PM
Switchback single turbo build	seanmorr370	Forced Induction	9	11-06-2019 08:47 PM
[FOR SALE] retrofit resource profile pivot switchback led strips	fishermanof93	Parts for sale (Private Classifieds)	2	07-19-2018 10:24 PM
Daytime Running Lights + Switchback LED’s	TheW3r3W0lf	Exterior & Interior	66	04-30-2018 10:59 PM
[FOR SALE] 2 switchback led turn signal bulbs	Baer383	Parts for sale (Private Classifieds)	4	05-31-2014 02:00 PM

10-13-2020, 06:23 PM	#20 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,259 Drives: 2011 370Z Nismo Rep Power: 24277	I can't think of any of the turbo kits that would allow the use of ART pipes other than a rear mounted one.