Start up issues

Fcnismo · 09-17-2020, 11:41 PM

I’m not sure what to think about this . When I start up the car for the first time
In the day. It feels like it doesn’t want to go. StArts and rolls but when I accelerate it look like it’s clogs and boggles once or twice afterward all good like nothing Happen. I have a stillen Intake
Any ideas

SouthArk370Z · 09-18-2020, 08:19 AM

See if there are any PIDs - you can buy a scanner or most parts stores will loan/rent you one (some will even go out in the parking lot and pull the code for you).

Clean your MAFs. Very easy job - a screwdriver, a can of spray cleaner, and about 15 minutes.

Fcnismo · 09-18-2020, 10:26 AM

No codes mass air flow clean

SouthArk370Z · 09-18-2020, 11:12 AM

Someone should come up with an answer before too long. Until then, I'd check the easy stuff such as dirty air filters, cut wiring, etc.

The FSM (link in sig) has a LOT of good info for the DIYer.

Fcnismo · 09-18-2020, 12:52 PM

I took apart the stillen intakes and looked through them but they are brand new
And look good. I then realize if there was something wrong with the install or them in general it would act up always not just in cold start. Car only has 10k on it still new

J.O. · 09-19-2020, 10:39 AM

Weird. Sounds like limp mode but that shouldn't be an issue right away after starting up even if you live somewhere pretty hot. Manual or auto?

I would check back with the dealership since the miles are so low

Sent from my GM1917 using Tapatalk

Fcnismo · 09-19-2020, 11:11 AM

No problem found and everyone goes right to the stillen cold air intake as the problem.

09-17-2020, 11:41 PM	#1 (permalink)
Fcnismo Base Member Join Date: Aug 2020 Location: Nj Posts: 96 Drives: 2019 roadster Rep Power: 5	Start up issues I’m not sure what to think about this . When I start up the car for the first time In the day. It feels like it doesn’t want to go. StArts and rolls but when I accelerate it look like it’s clogs and boggles once or twice afterward all good like nothing Happen. I have a stillen Intake Any ideas

09-18-2020, 08:19 AM	#2 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	See if there are any PIDs - you can buy a scanner or most parts stores will loan/rent you one (some will even go out in the parking lot and pull the code for you). Clean your MAFs. Very easy job - a screwdriver, a can of spray cleaner, and about 15 minutes. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

09-18-2020, 11:12 AM	#4 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Someone should come up with an answer before too long. Until then, I'd check the easy stuff such as dirty air filters, cut wiring, etc. The FSM (link in sig) has a LOT of good info for the DIYer. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATTENTION!! 2009-2010 owners with steering lock/wont start issues	Trips	Nissan 370Z General Discussions	510	01-02-2022 07:21 AM
370z wont start no power . Where to start	acracing118	Exterior & Interior	6	01-05-2013 07:37 PM
GTM Stage 2 TT: Engine Start Issues?	DIGItonium	Forced Induction	22	06-13-2012 09:02 AM
cold start/push start	chops	Nissan 370Z General Discussions	21	02-14-2011 04:40 AM
thinking of buying 370z, then GTM turbo's , but overheat issues,oil issues ??	Christopher	Nissan 370Z General Discussions	19	10-16-2009 04:55 PM

09-18-2020, 10:26 AM	#3 (permalink)
Fcnismo Base Member Join Date: Aug 2020 Location: Nj Posts: 96 Drives: 2019 roadster Rep Power: 5	No codes mass air flow clean

09-18-2020, 12:52 PM	#5 (permalink)
Fcnismo Base Member Join Date: Aug 2020 Location: Nj Posts: 96 Drives: 2019 roadster Rep Power: 5	I took apart the stillen intakes and looked through them but they are brand new And look good. I then realize if there was something wrong with the install or them in general it would act up always not just in cold start. Car only has 10k on it still new

09-19-2020, 10:39 AM	#6 (permalink)
J.O. Base Member Join Date: Jun 2018 Location: East Coast, USA Posts: 14 Drives: 2011 370z Silver 6MT Rep Power: 7	Weird. Sounds like limp mode but that shouldn't be an issue right away after starting up even if you live somewhere pretty hot. Manual or auto? I would check back with the dealership since the miles are so low Sent from my GM1917 using Tapatalk

09-19-2020, 11:11 AM	#7 (permalink)
Fcnismo Base Member Join Date: Aug 2020 Location: Nj Posts: 96 Drives: 2019 roadster Rep Power: 5	No problem found and everyone goes right to the stillen cold air intake as the problem.