Wueros tt build

Elmo370z · 12-20-2020, 08:04 PM

Good stuff

Wuero370z · 12-29-2020, 12:58 PM

I’m not sure where I got my info from but I remember people saying the 370z axles were good for close to 700hp. I beg to differ, I think I’m only around 600-650hp at about 6500da. I snapped the oem drivers side axle while testing new slicks on a prepped street. 5500rpm launch and it broke on the clutch drop obviously. Went to autozone and snagged one hoping I could make some softer launches and race in a cash days the following day. Raced a 2020 Supra and lost by a bumper (had a really bad launch) first round. I called him out to run after the cash days and we did agreed for another $100. I launched at 5500 and snapped the autozone axle so lost that race as well. Really hurts knowing I’m gunna have to dish out 2100 for some axles

Sent from my iPhone using Tapatalk

Spooler · 12-29-2020, 01:09 PM

Ugg, not good.

Spooler · 12-29-2020, 01:12 PM

You may want to get the newer axles. They cost a little more and support more Hp/TQ.

Wuero370z · 12-29-2020, 01:22 PM

Quote:

Originally Posted by Spooler

You may want to get the newer axles. They cost a little more and support more Hp/TQ.

Oh shoot I didn’t realize they were different. I see those for 2540 right?

https://www.driveshaftshop.com/impor...ro-level-axles

Sent from my iPhone using Tapatalk

Spooler · 12-29-2020, 01:31 PM

Quote:

Originally Posted by Wuero370z

Oh shoot I didn’t realize they were different. I see those for 2540 right?

https://www.driveshaftshop.com/impor...ro-level-axles

Sent from my iPhone using Tapatalk

You have to call. Not on the Website yet. They are about 3k. They have a bigger outer CV joint.

Spooler · 12-29-2020, 02:05 PM

I just got off the phone with them. I could upgrade mine but the shaft is the only thing I would keep. So, Get the 1500hp ones since you drag race.

JARblue · 12-29-2020, 03:28 PM

Quote:

Originally Posted by Spooler

I just got off the phone with them. I could upgrade mine but the shaft is the only thing I would keep. So, Get the 1500hp ones since you drag race.

How much you want for yours?

Spooler · 12-29-2020, 03:31 PM

Quote:

Originally Posted by JARblue

How much you want for yours?

Not for sale since I will rarely frequent a drag strip.

JARblue · 12-29-2020, 03:34 PM

Quote:

Originally Posted by Spooler

Not for sale since I will rarely frequent a drag strip.

You can put the money towards the upgraded ones. That way they don't break the one time you do visit a drag strip

I'll even pay you ahead of time so you can order the new ones and still be running while they build them. You know I don't install anything I purchase

Elmo370z · 12-29-2020, 07:15 PM

Quote:

Originally Posted by Wuero370z

Oh shoot I didn’t realize they were different. I see those for 2540 right?

https://www.driveshaftshop.com/impor...ro-level-axles

Sent from my iPhone using Tapatalk

Justin was launching at 7,000 Rpms on a stock axles. Did you load the rear end before dumping the clutch?

Spooler · 12-29-2020, 07:42 PM

Quote:

Originally Posted by Elmo370z

Justin was launching at 7,000 Rpms on a stock axles. Did you load the rear end before dumping the clutch?

He was but they were looking ugly. Load it with the clutch or not they will break.

Elmo370z · 12-29-2020, 10:11 PM

Quote:

Originally Posted by Spooler

He was but they were looking ugly. Load it with the clutch or not they will break.

Justin’s never broke with iver 50 passes at the drag strip. Yes they will break eventually. But not using the proper setup for oem axles, they will break more often. Either shocking the suspenion or putting to much load on them. But I agree with upgrading the axles, but with that still a crap shot at it fixing the solution. Not data to prove they will work for our cars.

Spooler · 12-29-2020, 10:59 PM

Quote:

Originally Posted by Elmo370z

Justin’s never broke with iver 50 passes at the drag strip. Yes they will break eventually. But not using the proper setup for oem axles, they will break more often. Either shocking the suspenion or putting to much load on them. But I agree with upgrading the axles, but with that still a crap shot at it fixing the solution. Not data to prove they will work for our cars.

He was just lucky. One wrong move and TINK!!!!! Gone.

Wuero370z · 12-29-2020, 11:04 PM

Quote:

Originally Posted by Spooler

I just got off the phone with them. I could upgrade mine but the shaft is the only thing I would keep. So, Get the 1500hp ones since you drag race.

I would’ve never known thank you

Sent from my iPhone using Tapatalk

12-20-2020, 08:04 PM	#46 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Good stuff Wuero370z likes this.

12-29-2020, 12:58 PM	#47 (permalink)
Wuero370z Enthusiast Member Join Date: Nov 2018 Location: Albuquerque Posts: 358 Drives: 2013 Nissan 370z Rep Power: 6717	I’m not sure where I got my info from but I remember people saying the 370z axles were good for close to 700hp. I beg to differ, I think I’m only around 600-650hp at about 6500da. I snapped the oem drivers side axle while testing new slicks on a prepped street. 5500rpm launch and it broke on the clutch drop obviously. Went to autozone and snagged one hoping I could make some softer launches and race in a cash days the following day. Raced a 2020 Supra and lost by a bumper (had a really bad launch) first round. I called him out to run after the cash days and we did agreed for another $100. I launched at 5500 and snapped the autozone axle so lost that race as well. Really hurts knowing I’m gunna have to dish out 2100 for some axles Sent from my iPhone using Tapatalk gbrettin, Optimiser, Spooler and 3 others like this.

12-29-2020, 01:09 PM	#48 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Ugg, not good. jchammond and Wuero370z like this.

12-29-2020, 01:12 PM	#49 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	You may want to get the newer axles. They cost a little more and support more Hp/TQ. jchammond likes this.

12-29-2020, 02:05 PM	#52 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	I just got off the phone with them. I could upgrade mine but the shaft is the only thing I would keep. So, Get the 1500hp ones since you drag race. jchammond and Wuero370z like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Mag Z Build	TheMagZ	Member's 370Z Gallery	16	07-09-2016 08:46 PM
My Build	skoolio	Member's 370Z Gallery	6	02-08-2016 09:55 PM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 06:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM