Wueros tt build

Wuero370z · 07-27-2020, 08:00 PM

Quote:

Originally Posted by JLarson

I did 750 miles each way to Michigan and back for Madwi's meetup a few weeks ago. BP single. Everything went very smoothly.

Just curious, is the turbo oil cooled?

Sent from my iPhone using Tapatalk

Spooler · 07-27-2020, 10:19 PM

Quote:

Originally Posted by Wuero370z

Just curious, is the turbo oil cooled?

Sent from my iPhone using Tapatalk

I think he is water cooled with a sealed system he adds bearing grease too every 3k miles. Your FI kit will be both water and oil cooled. Turbo's never lasted until they started water cooling them back in the mid 80's.

Rusty · 07-27-2020, 10:30 PM

Another hard thing on turbo's. Rev'ing the motor, then shutting it off. The little rotors could be spinning as fast as 100,000 rpm with no cooling or oil.

Wuero370z · 07-29-2020, 11:40 AM

Quote:

Originally Posted by Rusty

Another hard thing on turbo's. Rev'ing the motor, then shutting it off. The little rotors could be spinning as fast as 100,000 rpm with no cooling or oil.

So ideally you’d want to let the vehicle come to idle before shutting off right?

Sent from my iPhone using Tapatalk

JLarson · 07-29-2020, 11:43 AM

Quote:

Originally Posted by Spooler

I think he is water cooled with a sealed system he adds bearing grease too every 3k miles. Your FI kit will be both water and oil cooled. Turbo's never lasted until they started water cooling them back in the mid 80's.

Spooler is correct. The current BP kit uses the Comp turbo, which is an oilless system, but still uses water cooling.

Spooler · 07-29-2020, 10:32 PM

Quote:

Originally Posted by Wuero370z

So ideally you’d want to let the vehicle come to idle before shutting off right?

Sent from my iPhone using Tapatalk

For 2 to 3 minutes minimum. 5 is better. It depends how hard you have been running your car. If the manifolds are glowing, wait longer. LMAO....

Rusty · 07-29-2020, 11:01 PM

Quote:

Originally Posted by Wuero370z

So ideally you’d want to let the vehicle come to idle before shutting off right?

Sent from my iPhone using Tapatalk

Yep

Quote:

Originally Posted by Spooler

For 2 to 3 minutes minimum. 5 is better. It depends how hard you have been running your car. If the manifolds are glowing, wait longer. LMAO....

blueranger · 07-31-2020, 10:21 AM

Quote:

Originally Posted by Wuero370z

Dropped the car off just now with Specialty Z after the trip from New Mexico. Trailered the car to Cali Saturday, then unloaded to mob around LA a bit and enjoy the great weather. Anybody ever gone on a long road trip in their turbo Z? 11+ hours long....

Sent from my iPhone using Tapatalk

I drove mine from Cali to NM with an overnight stay in Phoenix to relax. Congrats on you upcoming build, you are in good hands with Seb.

Wuero370z · 08-04-2020, 08:39 PM

Well I asked Seb to install an OS giken diff and he recommended the wavetrac instead. Unfortunately they are out of stock, he presented me with the option of going with Quaife or the OSG.
Not sure if I should wait or just go osg

Sent from my iPhone using Tapatalk

redondoaveb · 08-04-2020, 08:51 PM

Quote:

Originally Posted by Wuero370z

Well I asked Seb to install an OS giken diff and he recommended the wavetrac instead. Unfortunately they are out of stock, he presented me with the option of going with Quaife or the OSG.
Not sure if I should wait or just go osg

Sent from my iPhone using Tapatalk

I like my osg a lot more than I did my quaife

Spooler · 08-04-2020, 09:04 PM

Quote:

Originally Posted by Wuero370z

Well I asked Seb to install an OS giken diff and he recommended the wavetrac instead. Unfortunately they are out of stock, he presented me with the option of going with Quaife or the OSG.
Not sure if I should wait or just go osg

Sent from my iPhone using Tapatalk

If you get the OS Giken you will need a diff cooler to keep the temps in check. The wavetrac would be a great choice if you could get one. That was my first choice but like you, they were out of stock.
The Quaife is a no go.

redondoaveb · 08-04-2020, 09:18 PM

Z1 and Z Speed both show they have the wavetrac in stock. Not sure if true though.

madwi · 08-04-2020, 09:44 PM

Fwiw, Joe had a great price when I ordered my Wavetrac.

redondoaveb · 08-04-2020, 09:47 PM

Quote:

Originally Posted by madwi

Fwiw, Joe had a great price when I ordered my Wavetrac.

He still does.

Wuero370z · 08-04-2020, 11:30 PM

Quote:

Originally Posted by redondoaveb

Z1 and Z Speed both show they have the wavetrac in stock. Not sure if true though.

I will find out!

Sent from my iPhone using Tapatalk

07-27-2020, 10:30 PM	#18 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Another hard thing on turbo's. Rev'ing the motor, then shutting it off. The little rotors could be spinning as fast as 100,000 rpm with no cooling or oil. Spooler and Wuero370z like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-04-2020, 09:18 PM	#27 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,360 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	Z1 and Z Speed both show they have the wavetrac in stock. Not sure if true though. madwi, Spooler and Wuero370z like this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

08-04-2020, 09:44 PM	#28 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Fwiw, Joe had a great price when I ordered my Wavetrac. redondoaveb likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Mag Z Build	TheMagZ	Member's 370Z Gallery	16	07-09-2016 08:46 PM
My Build	skoolio	Member's 370Z Gallery	6	02-08-2016 09:55 PM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 06:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM

08-04-2020, 08:39 PM	#24 (permalink)
Wuero370z Enthusiast Member Join Date: Nov 2018 Location: Albuquerque Posts: 358 Drives: 2013 Nissan 370z Rep Power: 6717	Well I asked Seb to install an OS giken diff and he recommended the wavetrac instead. Unfortunately they are out of stock, he presented me with the option of going with Quaife or the OSG. Not sure if I should wait or just go osg Sent from my iPhone using Tapatalk