Another GTR TT Z

2011 Nismo#91 · 04-30-2020, 07:29 AM

Well I finally decided to do TTs on my Z. I was reluctant to do it because I do put it through a lot at the track and heat was already an issue. But not having anywhere to go for a few months and having a lot of other maintenance and fixes to do along with a pretty good deal; I figured it was time for more power since I pretty much did everything else performance wise except aero. Which I will probably need next to deal with the extra power. Anyway here are some pics of the current state at Real Auto Dynamics in Ocean Side NY.

Jayhovah · 04-30-2020, 10:50 AM

Subbed. Excited to see more of these GTR/TT and upcoming BP/TT Builds coming out! Twin Turbos unite!

TBatt · 04-30-2020, 11:24 AM

Congrats! Keep us posted on the rest of the project, please.

I would like to know how the power delivery works out on the track. SC is very predictable but a turbo car can be a handful when the boost builds unexpectedly.

Spooler · 04-30-2020, 11:38 AM

Quote:

Originally Posted by TBatt

Congrats! Keep us posted on the rest of the project, please.

I would like to know how the power delivery works out on the track. SC is very predictable but a turbo car can be a handful when the boost builds unexpectedly.

Small turbo's that spool too quick can be a pain in the butt. Get a little bit bigger turbo and you get more control with your right foot. My car wasn't too bad.

2011 Nismo#91 · 04-30-2020, 12:30 PM

Quote:

Originally Posted by TBatt

Congrats! Keep us posted on the rest of the project, please.

I would like to know how the power delivery works out on the track. SC is very predictable but a turbo car can be a handful when the boost builds unexpectedly.

I'm guessing it should be similar to a GTR minus the AWD. But I'm just going to have to relearn how to come out of turns. And of course heat will be an issue again, though I hope relocating the 34row Oil and 19row PS coolers to the stillen side ducts will help.

Elmo370z · 04-30-2020, 04:19 PM

Quote:

Originally Posted by 2011 Nismo#91

I'm guessing it should be similar to a GTR minus the AWD. But I'm just going to have to relearn how to come out of turns. And of course heat will be an issue again, though I hope relocating the 34row Oil and 19row PS coolers to the stillen side ducts will help.

It will be a learning curve. I’m upgrading to 10 -AN fitting first my
Oil cooler. If that doesn’t help, I’ll go for twin coolers

JARblue · 04-30-2020, 07:10 PM

Figured it was bout time for you

Rusty · 05-01-2020, 12:19 AM

Quote:

Originally Posted by Elmo370z

It will be a learning curve. I’m upgrading to 10 -AN fitting first my
Oil cooler. If that doesn’t help, I’ll go for twin coolers

The FI coolers uses an AN -8. Z1 uses an AN -10 fittings and hoses. Found this out when I was helping JL with his BP turbo install.

2011 Nismo#91 · 05-01-2020, 04:07 PM

Quote:

Originally Posted by JARblue

Figured it was bout time for you

Yes, I could easily pass those 500+ hp Mustangs, Camaros, Vetts, and Dodges in the twisties but they would always blow by me in the straights. Not for long.

Rusty · 05-01-2020, 04:19 PM

Quote:

Originally Posted by 2011 Nismo#91

Yes, I could easily pass those 500+ hp Mustangs, Camaros, Vetts, and Dodges in the twisties but they would always blow by me in the straights. Not for long.

I know that feeling.

I usually catch them on the brakes.

What made you go with the GTR turbo's?

Elmo370z · 05-01-2020, 05:28 PM

Quote:

Originally Posted by Rusty

The FI coolers uses an AN -8. Z1 uses an AN -10 fittings and hoses. Found this out when I was helping JL with his BP turbo install.

Yup, I’m swapping them
Out for -10an

2011 Nismo#91 · 07-01-2020, 08:14 AM

Its pretty much done, a few minor things left but it's up an running.

Coolant temp is a bit high in traffic. (Water, waterwetter, CFS triplepass)
Thinking maybe a manual fan switch paired with a better fan setup.

Need to replace the damage bumper.

Need to install guage pod and order/install dual band afr guage.

Install/order oil catch can.

Verify oil blow by is no longer an issue.

Replace windsheild washer bottle.

Get the ECUtek app working with my OBDIILink LX.

Cold start idle fix, revs only to 500rpm on cold start and have to give it gas to get to the normal 1200.

Oil pressure is about 10-15psi lower then before, 19psi idle and 70 at around 3k on the highway. Not really an issue, just an observation.

Full boost kicks in on or just before 4k so will be great on the track.

BOLIO 671 · 07-01-2020, 08:38 AM

Congrats. Nice numbers...should be controllable and fun to drive with those numbers... I’m assuming this is what n 91 pump gas....

Lmk what option u did for a windshield reservoir replacement. Jayhovah has a pretty good write up for a DIY option.

Spooler · 07-01-2020, 10:55 AM

TracSpec vents will help you in stop and go traffic stay cool.

2011 Nismo#91 · 07-01-2020, 11:35 AM

Quote:

Originally Posted by Spooler

TracSpec vents will help you in stop and go traffic stay cool.

Already installed prior.

04-30-2020, 07:29 AM	#1 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,402 Drives: slowly Rep Power: 40569	Another GTR TT Z Well I finally decided to do TTs on my Z. I was reluctant to do it because I do put it through a lot at the track and heat was already an issue. But not having anywhere to go for a few months and having a lot of other maintenance and fixes to do along with a pretty good deal; I figured it was time for more power since I pretty much did everything else performance wise except aero. Which I will probably need next to deal with the extra power. Anyway here are some pics of the current state at Real Auto Dynamics in Ocean Side NY. fryzia23, JARblue, Rusty and 16 others like this.

04-30-2020, 11:24 AM	#3 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	Congrats! Keep us posted on the rest of the project, please. I would like to know how the power delivery works out on the track. SC is very predictable but a turbo car can be a handful when the boost builds unexpectedly. 2011 Nismo#91, Rusty, Hotrodz and 2 others like this. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

04-30-2020, 07:10 PM	#7 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Figured it was bout time for you 2011 Nismo#91 likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-01-2020, 08:14 AM	#12 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,402 Drives: slowly Rep Power: 40569	Its pretty much done, a few minor things left but it's up an running. Coolant temp is a bit high in traffic. (Water, waterwetter, CFS triplepass) Thinking maybe a manual fan switch paired with a better fan setup. Need to replace the damage bumper. Need to install guage pod and order/install dual band afr guage. Install/order oil catch can. Verify oil blow by is no longer an issue. Replace windsheild washer bottle. Get the ECUtek app working with my OBDIILink LX. Cold start idle fix, revs only to 500rpm on cold start and have to give it gas to get to the normal 1200. Oil pressure is about 10-15psi lower then before, 19psi idle and 70 at around 3k on the highway. Not really an issue, just an observation. Full boost kicks in on or just before 4k so will be great on the track. JARblue, Rusty, BC416 and 3 others like this.

07-01-2020, 08:38 AM	#13 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Congrats. Nice numbers...should be controllable and fun to drive with those numbers... I’m assuming this is what n 91 pump gas.... Lmk what option u did for a windshield reservoir replacement. Jayhovah has a pretty good write up for a DIY option. 2011 Nismo#91 and Jayhovah like this. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

07-01-2020, 10:55 AM	#14 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	TracSpec vents will help you in stop and go traffic stay cool. 2011 Nismo#91 and JARblue like this.